On 10/27/2017 02:12 AM, Lukasz Majewski wrote:
This commit allows extended Marvell registers to be read with:
foo > mdio rx FEC 3.10 Reading from bus FEC PHY at address 0: 3.16 - 0x1063 foo > mdio wx FEC 3.10 0x1011
The above code changes the way ETH connector LEDs blink.
Signed-off-by: Lukasz Majewski lukma@denx.de
Changes in v2:
- Provide the readext and writeext callbacks to other marvell ETH PHY
devices
drivers/net/phy/marvell.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index b7f300e..19f451d 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -104,6 +104,31 @@ #define MIIM_88E151x_MODE_SGMII 1 #define MIIM_88E151x_RESET_OFFS 15
+static int m88e1xxx_phy_extread(struct phy_device *phydev, int addr,
int devaddr, int regnum)+{
- int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE);
- int val;
- phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, devaddr);
- val = phy_read(phydev, MDIO_DEVAD_NONE, regnum);
- phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, oldpage);
- return val;
+}
+static int m88e1xxx_phy_extwrite(struct phy_device *phydev, int addr,
int devaddr, int regnum, u16 val)+{
- int oldpage = phy_read(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE);
- phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, devaddr);
- phy_write(phydev, MDIO_DEVAD_NONE, regnum, val);
- phy_write(phydev, MDIO_DEVAD_NONE, MII_MARVELL_PHY_PAGE, oldpage);
- return 0;
+}
/* Marvell 88E1011S */ static int m88e1011s_config(struct phy_device *phydev) { @@ -599,6 +624,8 @@ static struct phy_driver M88E1011S_driver = { .config = &m88e1011s_config, .startup = &m88e1011s_startup, .shutdown = &genphy_shutdown,
- .readext = &m88e1xxx_phy_extread,
- .writeext = &m88e1xxx_phy_extwrite,
};
Lukasz,
This seems wrong. 88E1011S doesn't have the page register. I can only confirm 88E1111 and 88E1145 have pages. I don't have other part's datasheet to check.
York