Dear Andrew Murray,
The musb driver defines and uses MUSB_CSR0_H_DIS_PING, however this bit is reserved on the DM36x. Thus this patch ensures that the reserved bit is not accesssed.
It has been observed that some USB devices will fail to enumerate with errors such as 'error in inquiry' without this patch.
See http://www.ti.com/litv/pdf/sprufh9a for details.
Cc: Marek Vasut marex@denx.de Cc: Tom Rini trini@ti.com Signed-off-by: Andrew Murray amurray@embedded-bits.co.uk
drivers/usb/musb/musb_core.h | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index ec8a038..c9a9d66 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -216,7 +216,11 @@ struct musb_regs {
#define MUSB_CSR0_P_SENTSTALL 0x0004
/* CSR0 in Host mode */
+#if defined(CONFIG_SOC_DM365) +#define MUSB_CSR0_H_DIS_PING 0x0000 +#else
#define MUSB_CSR0_H_DIS_PING 0x0800
+#endif
#define MUSB_CSR0_H_WR_DATATOGGLE 0x0400 /* Set to allow setting: */ #define MUSB_CSR0_H_DATATOGGLE 0x0200 /* Data toggle control
*/
#define MUSB_CSR0_H_NAKTIMEOUT 0x0080
It would be much nicer if you avoided using this bit in musb_hcd.c instead of hacking it like this.
Bump? Will we get a V2 here ?
Best regards, Marek Vasut