Re: [U-Boot] [PATCH v9 1/2] Odroid-XU3: Add support for Odroid-XU3

On Fri, 28 Nov 2014 00:16:15 +0900 Jaehoon Chung jh80.chung@samsung.com wrote:

On 11/27/2014 10:21 PM, Hyungwon Hwang wrote:

...

This patch adds support for Odroid-XU3.

Signed-off-by: Hyungwon Hwang human.hwang@samsung.com Tested-by: Lukasz Majewski l.majewski@samsung.com Acked-by: Lukasz Majewski l.majewski@samsung.com Cc: Minkyu Kang mk7.kang@samsung.com Cc: Lukasz Majewski l.majewski@samsung.com

---

Changes for v3:

• Remove unnecessary node from DT file
• Remove unnecessary features from config file
• Remove unnecessary macros from board-specific header file
• Fix some trivial typos in comments

Changes for v4:

• Add MMC FIFO buffer's configuration to DT file
• Make CONFIG_OF_CONTROL be set by the target information
• Add basic document to doc/README.odroid-xu3
• Add CONFIG_CMD_EXT4 to config file
• Add environment size and offset to config file
• Add extra default environment to make bootable without

modification

• Remove unnecessary features from config file

Changes for v5:

• Convert /include/ to #include in DT file

Changes for v6:

• Separate out the documentation to new commit
• Remove unnecessary header file inclusions from the board-specific

setup file

• Make the function board_clock_init be declared, only when CONFIG_BOARD_EARLY_INIT_F is defined

Changes for v7:

• Remove OF_CONTROL dependency from !SPL_BUILD

Changes for v8:

• Remove unnecessary properties in DT mmc node

Changes for v9:

• Remove useless variables in the default environment
• Replace the detailed information to the reference to the

documentation

arch/arm/cpu/armv7/exynos/Kconfig | 5 ++ arch/arm/dts/Makefile | 3 +- arch/arm/dts/exynos5422-odroidxu3.dts | 57 +++++++++++++++ board/samsung/odroid-xu3/Kconfig | 12 +++ board/samsung/odroid-xu3/MAINTAINERS | 6 ++ board/samsung/odroid-xu3/Makefile | 7 ++ board/samsung/odroid-xu3/odroid-xu3.c | 122 +++++++++++++++++++++++++++++++ board/samsung/odroid-xu3/setup.h | 95 ++++++++++++++++++++++++ configs/odroid-xu3_defconfig | 4 + include/configs/odroid.h | 5 -- include/configs/odroid_xu3.h | 133 ++++++++++++++++++++++++++++++++++ 11 files changed, 443 insertions(+), 6 deletions(-) create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts create mode 100644 board/samsung/odroid-xu3/Kconfig create mode 100644 board/samsung/odroid-xu3/MAINTAINERS create mode 100644 board/samsung/odroid-xu3/Makefile create mode 100644 board/samsung/odroid-xu3/odroid-xu3.c create mode 100644 board/samsung/odroid-xu3/setup.h create mode 100644 configs/odroid-xu3_defconfig create mode 100644 include/configs/odroid_xu3.h

diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index 13dbd95..16c9a0e 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -24,6 +24,10 @@ config TARGET_TRATS2 config TARGET_ODROID bool "Exynos4412 Odroid board"

+config TARGET_ODROID_XU3

• bool "Exynos5422 Odroid board"
• select OF_CONTROL

config TARGET_ARNDALE bool "Exynos5250 Arndale board" select SUPPORT_SPL @@ -65,6 +69,7 @@ source "board/samsung/universal_c210/Kconfig" source "board/samsung/origen/Kconfig" source "board/samsung/trats2/Kconfig" source "board/samsung/odroid/Kconfig" +source "board/samsung/odroid-xu3/Kconfig" source "board/samsung/arndale/Kconfig" source "board/samsung/smdk5250/Kconfig" source "board/samsung/smdk5420/Kconfig" diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e5846ea..a811b1b 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -13,7 +13,8 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5420-smdk5420.dtb \ exynos5420-peach-pit.dtb \

• exynos5800-peach-pi.dtb

• exynos5800-peach-pi.dtb \
• exynos5422-odroidxu3.dtb

dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts b/arch/arm/dts/exynos5422-odroidxu3.dts new file mode 100644 index 0000000..533d88e --- /dev/null +++ b/arch/arm/dts/exynos5422-odroidxu3.dts @@ -0,0 +1,57 @@ +/*

• • Odroid XU3 device tree source
• • Copyright (c) 2014 Samsung Electronics Co., Ltd.

• • http://www.samsung.com
    

• • SPDX-License-Identifier: GPL-2.0+
• */

+/dts-v1/; +#include "exynos54xx.dtsi"

+/ {

• model = "Odroid XU3 based on EXYNOS5422";
• compatible = "samsung,odroidxu3", "samsung,exynos5";
• aliases {

• serial0 = "/serial@12C00000";
  

• console = "/serial@12C20000";
  

• };
• memory {

• device_type = "memory";
  

• reg =  <0x40000000 0x10000000
  

• 	0x50000000 0x10000000
  

• 	0x60000000 0x10000000
  

• 	0x70000000 0x10000000
  

• 	0x80000000 0x10000000
  

• 	0x90000000 0x10000000
  

• 	0xa0000000 0x10000000
  

• 	0xb0000000 0xea00000>;
  

• };
• serial@12C20000 {

• status="okay";
  

• };
• mmc@12200000 {

• samsung,bus-width = <8>;
  

• samsung,timing = <1 3 3>;
  

• fifoth_val = <0x200f0020>;
  

If you resend the patch, i want to change the fifoth_val from 0x200f0020 to 0x201f0020. (Well, i'm not sure what's right. but when i have checked, the fifoth_depth is 0x40. Then Rx_MASK = FIFOTH_DEPTH/2 - 1, TX_MASK = FIFOTH_DEPTH/2.

You are right. I checked the document, and found that RX_MASK is recommened to be set by (FIFOTH_DEPTH/2 - 1) as you said.

...

• };
• mmc@12210000 {

• status = "disabled";
  

• };
• mmc@12220000 {

• samsung,bus-width = <4>;
  

• samsung,timing = <1 2 3>;
  

• fifoth_val = <0x200f0020>;
  

Ditto.

...

• };
• mmc@12230000 {

• status = "disabled";
  

• };

+}; diff --git a/board/samsung/odroid-xu3/Kconfig b/board/samsung/odroid-xu3/Kconfig new file mode 100644 index 0000000..6159692 --- /dev/null +++ b/board/samsung/odroid-xu3/Kconfig @@ -0,0 +1,12 @@ +if TARGET_ODROID_XU3

+config SYS_BOARD

• default "odroid-xu3"

+config SYS_VENDOR

• default "samsung"

+config SYS_CONFIG_NAME

• default "odroid_xu3"

+endif diff --git a/board/samsung/odroid-xu3/MAINTAINERS b/board/samsung/odroid-xu3/MAINTAINERS new file mode 100644 index 0000000..50cf928 --- /dev/null +++ b/board/samsung/odroid-xu3/MAINTAINERS @@ -0,0 +1,6 @@ +ODROID-XU3 BOARD +M: Hyungwon Hwang human.hwang@samsung.com +S: Maintained +F: board/samsung/odroid-xu3/ +F: include/configs/odroid_xu3.h +F: configs/odroid-xu3_defconfig diff --git a/board/samsung/odroid-xu3/Makefile b/board/samsung/odroid-xu3/Makefile new file mode 100644 index 0000000..85ae5c5 --- /dev/null +++ b/board/samsung/odroid-xu3/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (c) 2014 Samsung Electronics Co., Ltd. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +#

+obj-y := odroid-xu3.o diff --git a/board/samsung/odroid-xu3/odroid-xu3.c b/board/samsung/odroid-xu3/odroid-xu3.c new file mode 100644 index 0000000..8c54842 --- /dev/null +++ b/board/samsung/odroid-xu3/odroid-xu3.c @@ -0,0 +1,122 @@ +/*

• • Copyright (C) 2014 Samsung Electronics
• • Hyungwon Hwang human.hwang@samsung.com
• • SPDX-License-Identifier: GPL-2.0+
• */

+#include <common.h> +#include <asm/arch/clock.h> +#include "setup.h"

+DECLARE_GLOBAL_DATA_PTR;

+unsigned int get_board_rev(void) +{

• return 0;

+}

+int exynos_init(void) +{

• return 0;

+}

+#ifdef CONFIG_BOARD_EARLY_INIT_F +static int board_clock_init(void) +{

• unsigned int set, clr, clr_src_cpu, clr_pll_con0;
• struct exynos5420_clock *clk = (struct exynos5420_clock *)

samsung_get_base_clock();

• /*

• * CMU_CPU clocks src to MPLL
  

• * Bit values:                 0  ; 1
  

• * MUX_APLL_SEL:        FIN_PLL   ; FOUT_APLL
  

• * MUX_CORE_SEL:        MOUT_APLL ; SCLK_MPLL
  

• * MUX_HPM_SEL:         MOUT_APLL ; SCLK_MPLL_USER_C
  

• * MUX_MPLL_USER_SEL_C: FIN_PLL   ; SCLK_MPLL
  

• */
• /* Set CMU_CPU clocks src to OSCCLK */
• clr_src_cpu = MUX_APLL_SEL(1) | MUX_CORE_SEL(1);
• set = MUX_APLL_SEL(0) | MUX_CORE_SEL(1);
• clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
• while (MUX_STAT_CPU_CHANGING(readl(&clk->mux_stat_cpu)))

• continue;
  

• /* Set APLL to 1200MHz */
• clr_pll_con0 = SDIV(7) | PDIV(63) | MDIV(1023) | FSEL(1) |

• 	PLL_ENABLE(1);
  

• set = SDIV(0) | PDIV(2) | MDIV(100) | PLL_ENABLE(1);
• clrsetbits_le32(&clk->apll_con0, clr_pll_con0, set);
• while (!(readl(&clk->apll_con0) & PLL_LOCKED_BIT))

• continue;
  

• /* Set CMU_CPU clocks src to APLL */
• set = MUX_APLL_SEL(1) | MUX_CORE_SEL(0);
• clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set);
• while (MUX_STAT_CPU_CHANGING(readl(&clk->mux_stat_cpu)))

• continue;
  

• clr = ARM_RATIO(7) | CPUD_RATIO(7) | ATB_RATIO(7) |

•      PCLK_DBG_RATIO(7) | APLL_RATIO(7) | ARM2_RATIO(7);
  

• set = ARM_RATIO(0) | CPUD_RATIO(2) | ATB_RATIO(5) |

•      PCLK_DBG_RATIO(5) | APLL_RATIO(0) | ARM2_RATIO(0);
  

• clrsetbits_le32(&clk->div_cpu0, clr, set);
• while (readl(&clk->div_stat_cpu0) & DIV_STAT_CPU0_CHANGING)

• continue;
  

• /* Set MPLL to 800MHz */
• set = SDIV(1) | PDIV(3) | MDIV(200) | PLL_ENABLE(1);
• clrsetbits_le32(&clk->mpll_con0, clr_pll_con0, set);
• while (!(readl(&clk->mpll_con0) & PLL_LOCKED_BIT))

• continue;
  

• /* Set CLKMUX_UART src to MPLL */
• clr = UART0_SEL(7) | UART1_SEL(7) | UART2_SEL(7) |

UART3_SEL(7);

• set = UART0_SEL(3) | UART1_SEL(3) | UART2_SEL(3) |

UART3_SEL(3); +

• clrsetbits_le32(&clk->src_peric0, clr, set);
• /* Set SCLK_UART to 400 MHz (MPLL / 2) */
• clr = UART0_RATIO(15) | UART1_RATIO(15) | UART2_RATIO(15) |

•      UART3_RATIO(15);
  

• set = UART0_RATIO(1) | UART1_RATIO(1) | UART2_RATIO(1) |

•      UART3_RATIO(1);
  

• clrsetbits_le32(&clk->div_peric0, clr, set);
• while (readl(&clk->div_stat_peric0) &

DIV_STAT_PERIC0_CHANGING)

• continue;
  

• /* Set CLKMUX_MMC src to MPLL */
• clr = MUX_MMC0_SEL(7) | MUX_MMC1_SEL(7) | MUX_MMC2_SEL(7);
• set = MUX_MMC0_SEL(3) | MUX_MMC1_SEL(3) | MUX_MMC2_SEL(3);
• clrsetbits_le32(&clk->src_fsys, clr, set);
• clr = MMC0_RATIO(0x3ff) | MMC1_RATIO(0x3ff) |

MMC2_RATIO(0x3ff);

• set = MMC0_RATIO(0) | MMC1_RATIO(0) | MMC2_RATIO(0);
• clrsetbits_le32(&clk->div_fsys1, clr, set);
• /* Wait for divider ready status */
• while (readl(&clk->div_stat_fsys1) &

DIV_STAT_FSYS1_CHANGING)

• continue;
  

• return 0;

+}

+int exynos_early_init_f(void) +{

• return board_clock_init();

+} +#endif diff --git a/board/samsung/odroid-xu3/setup.h b/board/samsung/odroid-xu3/setup.h new file mode 100644 index 0000000..143c189 --- /dev/null +++ b/board/samsung/odroid-xu3/setup.h @@ -0,0 +1,95 @@ +/*

• • (C) Copyright 2014 Samsung Electronics
• • Hyungwon Hwang human.hwang@samsung.com
• • SPDX-License-Identifier: GPL-2.0+
• */

+#ifndef __ODROID_XU3_SETUP__ +#define __ODROID_XU3_SETUP__

+#define SDIV(x) ((x) & 0x7) +#define PDIV(x) (((x) & 0x3f) << 8) +#define MDIV(x) (((x) & 0x3ff) << 16) +#define FSEL(x) (((x) & 0x1) << 27) +#define PLL_LOCKED_BIT (0x1 << 29) +#define PLL_ENABLE(x) (((x) & 0x1) << 31)

+/* CLK_SRC_CPU */ +#define MUX_APLL_SEL(x) ((x) & 0x1) +#define MUX_CORE_SEL(x) (((x) & 0x1) << 16)

+/* CLK_MUX_STAT_CPU */ +#define APLL_SEL(x) ((x) & 0x7) +#define CORE_SEL(x) (((x) & 0x7) << 16) +#define MUX_STAT_CPU_CHANGING(x) !(((x) & APLL_SEL(0)) || \

• 			   (x) & APLL_SEL(1)
  

|| \

• 			   (x) & CORE_SEL(0)
  

|| \

• 			   (x) & CORE_SEL(1))
  

+/* CLK_DIV_CPU0 */ +#define ARM_RATIO(x) ((x) & 0x7) +#define CPUD_RATIO(x) (((x) & 0x7) << 4) +#define ATB_RATIO(x) (((x) & 0x7) << 16) +#define PCLK_DBG_RATIO(x) (((x) & 0x7) << 20) +#define APLL_RATIO(x) (((x) & 0x7) << 24) +#define ARM2_RATIO(x) (((x) & 0x7) << 28)

+/* CLK_DIV_STAT_CPU0 */ +#define DIV_CPUD(x) (((x) & 0x1) << 4) +#define DIV_ATB(x) (((x) & 0x1) << 16) +#define DIV_PCLK_DBG(x) (((x) & 0x1) << 20) +#define DIV_APLL(x) (((x) & 0x1) << 24) +#define DIV_ARM2(x) (((x) & 0x1) << 28)

+#define DIV_STAT_CHANGING 0x1 +#define DIV_STAT_CPU0_CHANGING (DIV_CPUD(DIV_STAT_CHANGING) | \

• 		 DIV_ATB(DIV_STAT_CHANGING) | \
  

• 		 DIV_PCLK_DBG(DIV_STAT_CHANGING) |
  

\

• 		 DIV_APLL(DIV_STAT_CHANGING) | \
  

• 		 DIV_ARM2(DIV_STAT_CHANGING))
  

+/* Set CLK_SRC_PERIC0 */ +#define UART0_SEL(x) (((x) & 0xf) << 4) +#define UART1_SEL(x) (((x) & 0xf) << 8) +#define UART2_SEL(x) (((x) & 0xf) << 12) +#define UART3_SEL(x) (((x) & 0xf) << 16)

+/* Set CLK_DIV_PERIC0 */ +#define UART0_RATIO(x) (((x) & 0xf) << 8) +#define UART1_RATIO(x) (((x) & 0xf) << 12) +#define UART2_RATIO(x) (((x) & 0xf) << 16) +#define UART3_RATIO(x) (((x) & 0xf) << 20)

+/* Set CLK_DIV_STAT_PERIC0 */ +#define DIV_UART0(x) ((x) & 0x1) +#define DIV_UART1(x) (((x) & 0x1) << 4) +#define DIV_UART2(x) (((x) & 0x1) << 8) +#define DIV_UART3(x) (((x) & 0x1) << 12) +#define DIV_UART4(x) (((x) & 0x1) << 16)

+#define DIV_STAT_PERIC0_CHANGING (DIV_UART4(DIV_STAT_CHANGING) | \

• 		  DIV_UART3(DIV_STAT_CHANGING) | \
  

• 		  DIV_UART2(DIV_STAT_CHANGING) | \
  

• 		  DIV_UART1(DIV_STAT_CHANGING) | \
  

• 		  DIV_UART0(DIV_STAT_CHANGING))
  

+/* CLK_SRC_FSYS */ +#define MUX_MMC0_SEL(x) (((x) & 0x7) << 8) +#define MUX_MMC1_SEL(x) (((x) & 0x7) << 12) +#define MUX_MMC2_SEL(x) (((x) & 0x7) << 16)

+/* CLK_DIV_FSYS1 */ +#define MMC0_RATIO(x) ((x) & 0x3ff) +#define MMC1_RATIO(x) (((x) & 0x3ff) << 10) +#define MMC2_RATIO(x) (((x) & 0x3ff) << 20)

+#define DIV_MMC0(x) (((x) & 1) << 20) +#define DIV_MMC1(x) (((x) & 1) << 24) +#define DIV_MMC2(x) (((x) & 1) << 28)

+#define DIV_STAT_FSYS1_CHANGING (DIV_MMC0(DIV_STAT_CHANGING) | \

• 		 DIV_MMC1(DIV_STAT_CHANGING) | \
  

• 		 DIV_MMC2(DIV_STAT_CHANGING))
  

+#endif diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig new file mode 100644 index 0000000..74aa0cf --- /dev/null +++ b/configs/odroid-xu3_defconfig @@ -0,0 +1,4 @@ +CONFIG_ARM=y +CONFIG_ARCH_EXYNOS=y +CONFIG_TARGET_ODROID_XU3=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3" diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 807e96b..660b6ae 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -166,11 +166,6 @@ "mmcbootpart=1\0" \ "mmcrootdev=0\0" \ "mmcrootpart=2\0" \

• "bootdelay=0\0" \
• "dfu_alt_system="CONFIG_DFU_ALT \
• "dfu_alt_info=Please reset the board\0" \
• "consoleon=set console console=ttySAC1,115200n8; save;

reset\0" \

• "consoleoff=set console console=ram; save; reset\0" \ "initrdname=uInitrd\0" \ "initrdaddr=42000000\0" \ "fdtaddr=40800000\0"

This is not XU3, separate the patch.

...

diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h new file mode 100644 index 0000000..1d53653 --- /dev/null +++ b/include/configs/odroid_xu3.h @@ -0,0 +1,133 @@ +/*

• • Copyright (C) 2013 Samsung Electronics
• • Hyungwon Hwang human.hwang@samsung.com
• • SPDX-License-Identifier: GPL-2.0+
• */

+#ifndef __CONFIG_ODROID_XU3_H +#define __CONFIG_ODROID_XU3_H

+#include "exynos5-common.h"

+#define CONFIG_SYS_PROMPT "ODROID-XU3 # " +#define CONFIG_IDENT_STRING " for ODROID-XU3"

+#define CONFIG_BOARD_COMMON

+#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_TEXT_BASE 0x43E00000

+/* select serial console configuration */ +#define CONFIG_SERIAL2 /* use SERIAL 2 */

+#define TZPC_BASE_OFFSET 0x10000

+#define CONFIG_CMD_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT

+/*

• • FIXME: The number of bank is actually 8. But there is no way to

reserver the

• • last 16 Mib in the last bank now. So I just excluded the last

bank

• • temporally.
• */

+#define CONFIG_NR_DRAM_BANKS 7 +#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ + +#define CONFIG_ENV_IS_IN_MMC

+#undef CONFIG_ENV_SIZE +#undef CONFIG_ENV_OFFSET +#define CONFIG_ENV_SIZE 4096 +#define CONFIG_ENV_OFFSET (SZ_1K * 1280) /* 1.25 MiB offset */ + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) + +#define CONFIG_BOOTCOMMAND "run autoboot" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" + +/*

• • For details, refer the documentation: doc/README.odroid

+*/ +#ifdef CONFIG_EXTRA_ENV_SETTINGS +#undef CONFIG_EXTRA_ENV_SETTINGS +#endif +#define CONFIG_EXTRA_ENV_SETTINGS \

• "loadkernel=fatload mmc ${mmcbootdev}:${mmcbootpart}

${kerneladdr} " \

• "${kernelname}\0" \
  

• "loadinitrd=fatload mmc ${mmcbootdev}:${mmcbootpart}

${initrdaddr} " \

• "${initrdname}\0" \
  

• "loaddtb=fatload mmc ${mmcbootdev}:${mmcbootpart}

${fdtaddr} " \

• "${fdtfile}\0" \
  

• "check_ramdisk=" \

• "if run loadinitrd; then " \
  

• 	"setenv initrd_addr ${initrdaddr};" \
  

• "else " \
  

• 	"setenv initrd_addr -;" \
  

• "fi;\0" \
  

• "check_dtb=" \

• "if run loaddtb; then " \
  

• 	"setenv fdt_addr ${fdtaddr};" \
  

• "else " \
  

• 	"setenv fdt_addr;" \
  

• "fi;\0" \
  

• "kernel_args=" \

• "setenv bootargs
  

root=/dev/mmcblk${mmcrootdev}p${mmcrootpart}" \

• " rootwait ${console} ${opts}\0" \
  

• "boot_fit=" \

• "setenv kerneladdr 0x42000000;" \
  

• "setenv kernelname Image.itb;" \
  

• "run loadkernel;" \
  

• "run kernel_args;" \
  

• "bootm ${kerneladdr}#${boardname}\0" \
  

• "boot_uimg=" \

• "setenv kerneladdr 0x40007FC0;" \
  

• "setenv kernelname uImage;" \
  

• "run check_dtb;" \
  

• "run check_ramdisk;" \
  

• "run loadkernel;" \
  

• "run kernel_args;" \
  

• "bootm ${kerneladdr} ${initrd_addr}
  

${fdt_addr};\0" \

• "boot_zimg=" \

• "setenv kerneladdr 0x40007FC0;" \
  

• "setenv kernelname zImage;" \
  

• "run check_dtb;" \
  

• "run check_ramdisk;" \
  

• "run loadkernel;" \
  

• "run kernel_args;" \
  

• "bootz ${kerneladdr} ${initrd_addr}
  

${fdt_addr};\0" \

• "autoboot=" \

• "if test -e mmc 0 Image.itb; then; " \
  

• 	"run boot_fit;" \
  

• "elif test -e mmc 0 zImage; then; " \
  

• 	"run boot_zimg;" \
  

• "elif test -e mmc 0 uImage; then; " \
  

• 	"run boot_uimg;" \
  

• "fi;\0" \
  

• "console=" CONFIG_DEFAULT_CONSOLE \
• "mmcbootdev=0\0" \
• "mmcbootpart=1\0" \
• "mmcrootdev=0\0" \
• "mmcrootpart=2\0" \
• "bootdelay=0\0" \
• "dfu_alt_info=Please reset the board\0" \
• "consoleon=set console console=ttySAC2,115200n8; save;

reset\0" \

• "consoleoff=set console console=ram; save; reset\0" \

I think you want to remove these.

I thought I removed it. There was a mistake when I made this patch. I am Sorry for that.

Best Regards, Jaehoon Chung

...

• "initrdname=uInitrd\0" \
• "initrdaddr=42000000\0" \
• "fdtaddr=40800000\0"

+/* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ +#undef CONFIG_EXYNOS_TMU +#undef CONFIG_TMU_CMD_DTT

+#ifdef CONFIG_CMD_NET +#undef CONFIG_CMD_NET +#undef CONFIG_SMC911X +#undef CONFIG_CMD_PXE +#undef CONFIG_MENU +#endif

+#endif /* __CONFIG_H */