Added functions to enable and disable USB clocks which can be invoked during USB init and USB exit respectively.
Cc: Roger Quadros rogerq@ti.com Cc: Tero Kristo t-kristo@ti.com Cc: Nishanth Menon nm@ti.com Signed-off-by: Kishon Vijay Abraham I kishon@ti.com --- arch/arm/cpu/armv7/omap5/hw_data.c | 97 ++++++++++++++++++++++++++++++++++++ arch/arm/include/asm/omap_common.h | 6 +++ 2 files changed, 103 insertions(+)
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index 11440ac..1085bb3 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -581,6 +581,103 @@ void enable_basic_uboot_clocks(void) 1); }
+#ifdef CONFIG_USB_DWC3 +void enable_usb_clocks(int index) +{ + u32 cm_l3init_usb_otg_ss_clkctrl = 0; + + if (index == 0) { + cm_l3init_usb_otg_ss_clkctrl = + (*prcm)->cm_l3init_usb_otg_ss1_clkctrl; + /* Enable 960 MHz clock for dwc3 */ + setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl, + OPTFCLKEN_REFCLK960M); + + /* Enable 32 KHz clock for dwc3 */ + setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl, + USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); + } else if (index == 1) { + cm_l3init_usb_otg_ss_clkctrl = + (*prcm)->cm_l3init_usb_otg_ss2_clkctrl; + /* Enable 960 MHz clock for dwc3 */ + setbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl, + OPTFCLKEN_REFCLK960M); + + /* Enable 32 KHz clock for dwc3 */ + setbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl, + USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); + + /* Enable 60 MHz clock for USB2PHY2 */ + setbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl, + L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK); + } + + u32 const clk_domains_usb[] = { + 0 + }; + + u32 const clk_modules_hw_auto_usb[] = { + (*prcm)->cm_l3init_ocp2scp1_clkctrl, + cm_l3init_usb_otg_ss_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_usb[] = { + 0 + }; + + do_enable_clocks(clk_domains_usb, + clk_modules_hw_auto_usb, + clk_modules_explicit_en_usb, + 1); +} + +void disable_usb_clocks(int index) +{ + u32 cm_l3init_usb_otg_ss_clkctrl = 0; + + if (index == 0) { + cm_l3init_usb_otg_ss_clkctrl = + (*prcm)->cm_l3init_usb_otg_ss1_clkctrl; + /* Disable 960 MHz clock for dwc3 */ + clrbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl, + OPTFCLKEN_REFCLK960M); + + /* Disable 32 KHz clock for dwc3 */ + clrbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl, + USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); + } else if (index == 1) { + cm_l3init_usb_otg_ss_clkctrl = + (*prcm)->cm_l3init_usb_otg_ss2_clkctrl; + /* Disable 960 MHz clock for dwc3 */ + clrbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl, + OPTFCLKEN_REFCLK960M); + + /* Disable 32 KHz clock for dwc3 */ + clrbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl, + USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); + + /* Disable 60 MHz clock for USB2PHY2 */ + clrbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl, + L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK); + } + + u32 const clk_domains_usb[] = { + 0 + }; + + u32 const clk_modules_disable[] = { + (*prcm)->cm_l3init_ocp2scp1_clkctrl, + cm_l3init_usb_otg_ss_clkctrl, + 0 + }; + + do_disable_clocks(clk_domains_usb, + clk_modules_disable, + 1); +} +#endif + const struct ctrl_ioregs ioregs_omap5430 = { .ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, .ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 224fbf0..527e143 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -587,6 +587,12 @@ u32 omap_ddr_clk(void); u32 get_sys_clk_index(void); void enable_basic_clocks(void); void enable_basic_uboot_clocks(void); + +#ifdef CONFIG_USB_DWC3 +void enable_usb_clocks(int index); +void disable_usb_clocks(int index); +#endif + void scale_vcores(struct vcores_data const *); u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic); void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);