Implement early init by calling generic board_init_f_alloc_reserve and board_init_f_init_reserve functions: * drop SYS_MALLOC_F_LEN related code, as allocation and gd->malloc_base assignment are taken care of by the generic functions * drop _gd logic
Signed-off-by: Ovidiu Panait ovidiu.panait@windriver.com ---
arch/microblaze/cpu/start.S | 45 ++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 23 deletions(-)
diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index f3be014317..1f580b1112 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -17,25 +17,40 @@ _start:
addi r8, r0, __end mts rslr, r8 - /* TODO: Redo this code to call board_init_f_*() */ + #if defined(CONFIG_SPL_BUILD) addi r1, r0, CONFIG_SPL_STACK_ADDR - mts rshr, r1 - addi r1, r1, -4 /* Decrement SP to top of memory */ -#else -#if CONFIG_VAL(SYS_MALLOC_F_LEN) - addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET - CONFIG_VAL(SYS_MALLOC_F_LEN) #else addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET #endif + mts rshr, r1 addi r1, r1, -4 /* Decrement SP to top of memory */
+ /* Call board_init_f_alloc_reserve with the current stack pointer as + * parameter. */ + add r5, r0, r1 + bralid r15, board_init_f_alloc_reserve + nop + + /* board_init_f_alloc_reserve returns a pointer to the allocated area + * in r3. Set the new stack pointer below this area. */ + add r1, r0, r3 + mts rshr, r1 + addi r1, r1, -4 + + /* Call board_init_f_init_reserve with the address returned by + * board_init_f_alloc_reserve as parameter. */ + add r5, r0, r3 + bralid r15, board_init_f_init_reserve + nop + +#if !defined(CONFIG_SPL_BUILD) /* Setup vectors with pre-relocation symbols */ or r5, r0, r0 bralid r15, __setup_exceptions nop -#endif /* CONFIG_SPL_BUILD */ +#endif
/* Flush cache before enable cache */ addik r5, r0, 0 @@ -48,7 +63,6 @@ _start: ori r12, r12, 0x1a0 mts rmsr, r12
- /* TODO: Redo this code to call board_init_f_*() */ clear_bss: /* clear BSS segments */ addi r5, r0, __bss_start @@ -67,27 +81,12 @@ clear_bss: #endif #ifndef CONFIG_SPL_BUILD or r5, r0, r0 /* flags - empty */ - addi r31, r0, _gd -#if CONFIG_VAL(SYS_MALLOC_F_LEN) - addi r6, r0, CONFIG_SYS_INIT_SP_OFFSET - swi r6, r31, GD_MALLOC_BASE -#endif brai board_init_f #else - addi r31, r0, _gd -#if CONFIG_VAL(SYS_MALLOC_F_LEN) - addi r6, r0, CONFIG_SPL_STACK_ADDR - swi r6, r31, GD_MALLOC_BASE -#endif brai board_init_r #endif 1: bri 1b
- .section .bss -.align 4 -_gd: - .space GENERATED_GBL_DATA_SIZE - #ifndef CONFIG_SPL_BUILD .text .ent __setup_exceptions