Hi Simon,
On 11/19/2018 9:23 PM, Simon Glass wrote:
This board has not been converted to CONFIG_DM_BLK by the deadline. Remove it.
Signed-off-by: Simon Glass sjg@chromium.org
Not sure if this is by mistake, but I see CONFIG_BLK is enabled in both the configs. Am I missing something?
➜ u-boot git:(master) make am65x_evm_r5_defconfig;cat .config | grep BLK # # configuration written to .config # CONFIG_BLK=y CONFIG_SPL_BLK=y
➜ u-boot git:(master) make am65x_evm_a53_defconfig;cat .config | grep BLK # # configuration written to .config # CONFIG_BLK=y CONFIG_SPL_BLK=y
Thanks and regards, Lokesh
arch/arm/mach-k3/Kconfig | 1 - board/ti/am65x/Kconfig | 52 -------- board/ti/am65x/MAINTAINERS | 7 -- board/ti/am65x/Makefile | 8 -- board/ti/am65x/README | 211 -------------------------------- board/ti/am65x/evm.c | 68 ---------- configs/am65x_evm_a53_defconfig | 71 ----------- configs/am65x_evm_r5_defconfig | 87 ------------- include/configs/am65x_evm.h | 75 ------------ 9 files changed, 580 deletions(-) delete mode 100644 board/ti/am65x/Kconfig delete mode 100644 board/ti/am65x/MAINTAINERS delete mode 100644 board/ti/am65x/Makefile delete mode 100644 board/ti/am65x/README delete mode 100644 board/ti/am65x/evm.c delete mode 100644 configs/am65x_evm_a53_defconfig delete mode 100644 configs/am65x_evm_r5_defconfig delete mode 100644 include/configs/am65x_evm.h
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig index e677a2e01b8..6b55b3c8c1f 100644 --- a/arch/arm/mach-k3/Kconfig +++ b/arch/arm/mach-k3/Kconfig @@ -65,5 +65,4 @@ config SYS_K3_SPL_ATF Enabling this will try to start Cortex-A (typically with ATF) after SPL from R5.
-source "board/ti/am65x/Kconfig" endif diff --git a/board/ti/am65x/Kconfig b/board/ti/am65x/Kconfig deleted file mode 100644 index d4b36dbb42f..00000000000 --- a/board/ti/am65x/Kconfig +++ /dev/null @@ -1,52 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ -# Lokesh Vutla lokeshvutla@ti.com
-choice
- prompt "K3 AM65 based boards"
- optional
-config TARGET_AM654_A53_EVM
- bool "TI K3 based AM654 EVM running on A53"
- select ARM64
- select SOC_K3_AM6
-config TARGET_AM654_R5_EVM
- bool "TI K3 based AM654 EVM running on R5"
- select CPU_V7R
- select SYS_THUMB_BUILD
- select SOC_K3_AM6
- select K3_AM654_DDRSS
- imply SYS_K3_SPL_ATF
-endchoice
-if TARGET_AM654_A53_EVM
-config SYS_BOARD
default "am65x"-config SYS_VENDOR
default "ti"-config SYS_CONFIG_NAME
default "am65x_evm"-endif
-if TARGET_AM654_R5_EVM
-config SYS_BOARD
default "am65x"-config SYS_VENDOR
default "ti"-config SYS_CONFIG_NAME
default "am65x_evm"-config SPL_LDSCRIPT
- default "arch/arm/mach-omap2/u-boot-spl.lds"
-endif diff --git a/board/ti/am65x/MAINTAINERS b/board/ti/am65x/MAINTAINERS deleted file mode 100644 index 7c52e7599e0..00000000000 --- a/board/ti/am65x/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -AM65x BOARD -M: Lokesh Vutla lokeshvutla@ti.com -S: Maintained -F: board/ti/am65x/ -F: include/configs/am65x_evm.h -F: configs/am65x_evm_a53_defconfig -F: configs/am65x_evm_r5_defconfig diff --git a/board/ti/am65x/Makefile b/board/ti/am65x/Makefile deleted file mode 100644 index 94dddfcc4a5..00000000000 --- a/board/ti/am65x/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/ -# Lokesh Vutla lokeshvutla@ti.com -# -# SPDX-License-Identifier: GPL-2.0+ -#
-obj-y := evm.o diff --git a/board/ti/am65x/README b/board/ti/am65x/README deleted file mode 100644 index 0b82bd557b5..00000000000 --- a/board/ti/am65x/README +++ /dev/null @@ -1,211 +0,0 @@
-Introduction:
-The AM65x family of SoCs is the first device family from K3 Multicore -SoC architecture, targeted for broad market and industrial control with -aim to meet the complex processing needs of modern embedded products.
-The device is built over three domains, each containing specific processing -cores, voltage domains and peripherals: -1. Wake-up (WKUP) domain:
- Device Management and Security Controller (DMSC)
-2. Microcontroller (MCU) domain:
- Dual Core ARM Cortex-R5F processor
-3. MAIN domain:
- Quad core 64-bit ARM Cortex-A53
-More info can be found in TRM: http://www.ti.com/lit/pdf/spruid7
-Boot Flow:
-On AM65x family devices, ROM supports boot only via MCU(R5). This means that -bootloader has to run on R5 core. In order to meet this constraint, and for -the following reasons the boot flow is designed as mentioned: -1. Need to move away from R5 asap, so that we want to start *any* -firmware on the r5 cores like.... autosar can be loaded to receive CAN -response and other safety operations to be started. This operation is -very time critical and is applicable for all automotive use cases. -2. U-Boot on A53 should start other remotecores for various -applications. This should happen before running Linux. -3. In production boot flow, we might not like to use full u-boot, -instead use Flacon boot flow to reduce boot time.
-+------------------------------------------------------------------------+ -| DMSC | R5 | A53 | -+------------------------------------------------------------------------+ -| +--------+ | | | -| | Reset | | | | -| +--------+ | | | -| : | | | -| +--------+ | +-----------+ | | -| | *ROM* |----------|-->| Reset rls | | | -| +--------+ | +-----------+ | | -| | | | : | | -| | ROM | | : | | -| |services| | : | | -| | | | +-------------+ | | -| | | | | *R5 ROM* | | | -| | | | +-------------+ | | -| | |<---------|---|Load and auth| | | -| | | | | tiboot3.bin | | | -| | | | +-------------+ | | -| | | | : | | -| | | | : | | -| | | | : | | -| | | | +-------------+ | | -| | | | | *R5 SPL* | | | -| | | | +-------------+ | | -| | | | | Load | | | -| | | | | sysfw.itb | | | -| | Start | | +-------------+ | | -| | System |<---------|---| Start | | | -| |Firmware| | | SYSFW | | | -| +--------+ | +-------------+ | | -| : | | | | | -| +---------+ | | Load | | | -| | *SYSFW* | | | system | | | -| +---------+ | | Config data | | | -| | |<--------|---| | | | -| | | | +-------------+ | | -| | | | | | | | -| | | | | DDR | | | -| | | | | config | | | -| | | | +-------------+ | | -| | | | | | | | -| | |<--------|---| Start A53 | | | -| | | | | and Reset | | | -| | | | +-------------+ | | -| | | | | +-----------+ | -| | |---------|-----------------------|---->| Reset rls | | -| | | | | +-----------+ | -| | DMSC | | | : | -| |Services | | | +-----------+ | -| | |<--------|-----------------------|---->|*ATF/OPTEE*| | -| | | | | +-----------+ | -| | | | | : | -| | | | | +-----------+ | -| | |<--------|-----------------------|---->| *A53 SPL* | | -| | | | | +-----------+ | -| | | | | | Load | | -| | | | | | u-boot.img| | -| | | | | +-----------+ | -| | | | | : | -| | | | | +-----------+ | -| | |<--------|-----------------------|---->| *U-Boot* | | -| | | | | +-----------+ | -| | | | | | prompt | | -| | | | | +-----------+ | -| +---------+ | | | -| | | | -+------------------------------------------------------------------------+
-- Here DMSC acts as master and provides all the critical services. R5/A53 -requests DMSC to get these services done as shown in the above diagram.
-Sources:
-1. SYSFW:
- Tree: git://git.ti.com/processor-firmware/system-firmware-image-gen.git
- Branch: master
-2. ATF:
- Tree: https://github.com/ARM-software/arm-trusted-firmware.git
- Branch: master
-3. OPTEE:
- Tree: https://github.com/OP-TEE/optee_os.git
- Branch: master
-4. U-Boot:
- Tree: http://git.denx.de/u-boot.git
- Branch: master
-Build procedure:
-1. SYSFW: -$ make CROSS_COMPILE=arm-linux-gnueabihf-
-2. ATF: -$ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed
-3. OPTEE: -$ make PLATFORM=k3-am65x CFG_ARM64_core=y
-4. U-Boot:
-4.1. R5: -$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am65x_evm_r5_defconfig O=/tmp/r5 -$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5
-4.2. A53: -$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- am65x_evm_a53_defconfig O=/tmp/a53 -$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager.bin O=/tmp/a53
-Target Images
-Copy the below images to an SD card and boot: -- sysfw.itb from step 1 -- tiboot3.bin from step 4.1 -- tispl.bin, u-boot.img from 4.2
-Image formats:
-- tiboot3.bin:
+-----------------------+| X.509 || Certificate || +-------------------+ || | | || | R5 | || | u-boot-spl.bin | || | | || +-------------------+ || | | || | FIT header | || | +---------------+ | || | | | | || | | DTB 1...N | | || | +---------------+ | || +-------------------+ |+-----------------------+-- tispl.bin
+-----------------------+| || FIT HEADER || +-------------------+ || | | || | A53 ATF | || +-------------------+ || | | || | A53 OPTEE | || +-------------------+ || | | || | A53 SPL | || +-------------------+ || | | || | SPL DTB 1...N | || +-------------------+ |+-----------------------+-- sysfw.itb
+-----------------------+| || FIT HEADER || +-------------------+ || | | || | sysfw.bin | || +-------------------+ || | | || | board config | || +-------------------+ || | | || | PM config | || +-------------------+ || | | || | RM config | || +-------------------+ || | | || | Secure config | || +-------------------+ |+-----------------------+diff --git a/board/ti/am65x/evm.c b/board/ti/am65x/evm.c deleted file mode 100644 index 784b2b0191d..00000000000 --- a/board/ti/am65x/evm.c +++ /dev/null @@ -1,68 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/*
- Board specific initialization for AM654 EVM
- Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/
- Lokesh Vutla lokeshvutla@ti.com
- */
-#include <common.h> -#include <asm/io.h> -#include <spl.h>
-DECLARE_GLOBAL_DATA_PTR;
-int board_init(void) -{
- return 0;
-}
-int dram_init(void) -{ -#ifdef CONFIG_PHYS_64BIT
- gd->ram_size = 0x100000000;
-#else
- gd->ram_size = 0x80000000;
-#endif
- return 0;
-}
-ulong board_get_usable_ram_top(ulong total_size) -{ -#ifdef CONFIG_PHYS_64BIT
- /* Limit RAM used by U-Boot to the DDR low region */
- if (gd->ram_top > 0x100000000)
return 0x100000000;-#endif
- return gd->ram_top;
-}
-int dram_init_banksize(void) -{
- /* Bank 0 declares the memory available in the DDR low region */
- gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
- gd->bd->bi_dram[0].size = 0x80000000;
-#ifdef CONFIG_PHYS_64BIT
- /* Bank 1 declares the memory available in the DDR high region */
- gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE1;
- gd->bd->bi_dram[1].size = 0x80000000;
-#endif
- return 0;
-}
-#ifdef CONFIG_SPL_LOAD_FIT -int board_fit_config_name_match(const char *name) -{ -#ifdef CONFIG_TARGET_AM654_A53_EVM
- if (!strcmp(name, "k3-am654-base-board"))
return 0;-#endif
- return -1;
-} -#endif diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig deleted file mode 100644 index a17cf7cb504..00000000000 --- a/configs/am65x_evm_a53_defconfig +++ /dev/null @@ -1,71 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_K3=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_SOC_K3_AM6=y -CONFIG_TARGET_AM654_A53_EVM=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y -CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_SPL_FAT_SUPPORT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=2 -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_LOAD_FIT=y -CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run run_kern" -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y -CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_DM_MAILBOX=y -CONFIG_SPL_DM_RESET=y -CONFIG_SPL_POWER_DOMAIN=y -CONFIG_SPL_REMOTEPROC=y -CONFIG_SPL_YMODEM_SUPPORT=y -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_REMOTEPROC=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_TIME=y -# CONFIG_ISO_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="k3-am654-base-board" -CONFIG_SPL_MULTI_DTB_FIT=y -CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y -CONFIG_ENV_IS_IN_FAT=y -CONFIG_ENV_FAT_INTERFACE="mmc" -CONFIG_ENV_FAT_DEVICE_AND_PART="1:1" -CONFIG_DM=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_CLK=y -CONFIG_SPL_CLK=y -CONFIG_CLK_TI_SCI=y -CONFIG_TI_SCI_PROTOCOL=y -CONFIG_DM_MAILBOX=y -CONFIG_K3_SEC_PROXY=y -CONFIG_MISC=y -CONFIG_DM_MMC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_K3_ARASAN=y -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_GENERIC is not set -CONFIG_SPL_PINCTRL=y -# CONFIG_SPL_PINCTRL_GENERIC is not set -CONFIG_PINCTRL_SINGLE=y -CONFIG_POWER_DOMAIN=y -CONFIG_TI_SCI_POWER_DOMAIN=y -CONFIG_K3_SYSTEM_CONTROLLER=y -CONFIG_REMOTEPROC_K3=y -CONFIG_DM_RESET=y -CONFIG_RESET_TI_SCI=y -CONFIG_DM_SERIAL=y -CONFIG_SYSRESET=y -CONFIG_SYSRESET_TI_SCI=y diff --git a/configs/am65x_evm_r5_defconfig b/configs/am65x_evm_r5_defconfig deleted file mode 100644 index 237b9e8229b..00000000000 --- a/configs/am65x_evm_r5_defconfig +++ /dev/null @@ -1,87 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_K3=y -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SYS_MALLOC_F_LEN=0x2000 -CONFIG_SOC_K3_AM6=y -CONFIG_TARGET_AM654_R5_EVM=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y -CONFIG_SPL_STACK_R_ADDR=0x82000000 -CONFIG_SPL_FAT_SUPPORT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 -# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -CONFIG_SPL_LOAD_FIT=y -CONFIG_USE_BOOTCOMMAND=y -# CONFIG_DISPLAY_CPUINFO is not set -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y -CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SPL_I2C_SUPPORT=y -CONFIG_SPL_DM_MAILBOX=y -CONFIG_SPL_DM_RESET=y -CONFIG_SPL_POWER_SUPPORT=y -CONFIG_SPL_POWER_DOMAIN=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y -CONFIG_SPL_REMOTEPROC=y -CONFIG_SPL_YMODEM_SUPPORT=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_BOOTZ=y -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_REMOTEPROC=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_TIME=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_SPL_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="k3-am654-r5-base-board" -CONFIG_SPL_MULTI_DTB_FIT=y -CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y -CONFIG_ENV_IS_IN_FAT=y -CONFIG_ENV_FAT_INTERFACE="mmc" -CONFIG_ENV_FAT_DEVICE_AND_PART="1:1" -CONFIG_DM=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SPL_OF_TRANSLATE=y -CONFIG_CLK=y -CONFIG_SPL_CLK=y -CONFIG_CLK_TI_SCI=y -CONFIG_TI_SCI_PROTOCOL=y -CONFIG_DM_GPIO=y -CONFIG_DA8XX_GPIO=y -CONFIG_DM_MAILBOX=y -CONFIG_K3_SEC_PROXY=y -CONFIG_MISC=y -CONFIG_DM_MMC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_K3_ARASAN=y -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_GENERIC is not set -CONFIG_SPL_PINCTRL=y -# CONFIG_SPL_PINCTRL_GENERIC is not set -CONFIG_PINCTRL_SINGLE=y -CONFIG_POWER_DOMAIN=y -CONFIG_TI_SCI_POWER_DOMAIN=y -CONFIG_DM_REGULATOR=y -CONFIG_SPL_DM_REGULATOR=y -CONFIG_DM_REGULATOR_GPIO=y -CONFIG_SPL_DM_REGULATOR_GPIO=y -CONFIG_RAM=y -CONFIG_SPL_RAM=y -CONFIG_K3_SYSTEM_CONTROLLER=y -CONFIG_REMOTEPROC_K3=y -CONFIG_DM_RESET=y -CONFIG_RESET_TI_SCI=y -CONFIG_DM_SERIAL=y -CONFIG_SYSRESET=y -CONFIG_SYSRESET_TI_SCI=y -CONFIG_TIMER=y -CONFIG_SPL_TIMER=y -CONFIG_OMAP_TIMER=y diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h deleted file mode 100644 index 484c5ef2fe1..00000000000 --- a/include/configs/am65x_evm.h +++ /dev/null @@ -1,75 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/*
- Configuration header file for K3 AM654 EVM
- Copyright (C) 2017-2018 Texas Instruments Incorporated - http://www.ti.com/
- Lokesh Vutla lokeshvutla@ti.com
- */
-#ifndef __CONFIG_AM654_EVM_H -#define __CONFIG_AM654_EVM_H
-#include <linux/sizes.h> -#include <config_distro_bootcmd.h> -#include <environment/ti/mmc.h>
-#define CONFIG_ENV_SIZE (128 << 10)
-/* DDR Configuration */ -#define CONFIG_SYS_SDRAM_BASE1 0x880000000
-/* SPL Loader Configuration */ -#ifdef CONFIG_TARGET_AM654_A53_EVM -#define CONFIG_SPL_TEXT_BASE 0x80080000 -#else -#define CONFIG_SPL_TEXT_BASE 0x41c00000 -#endif
-#ifdef CONFIG_SYS_K3_SPL_ATF -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin" -#endif
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \
CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE - 4)-/* U-Boot general configuration */ -#define EXTRA_ENV_AM65X_BOARD_SETTINGS \
- "findfdt=" \
"if test $board_name = am65x; then " \"setenv name_fdt k3-am654-base-board.dtb; " \"else if test $name_fdt = undefined; then " \"echo WARNING: Could not determine device tree to use;"\"fi; fi; " \"setenv fdtfile ${name_fdt}\0" \- "loadaddr=0x80080000\0" \
- "fdtaddr=0x82000000\0" \
- "name_kern=Image\0" \
- "console=ttyS2,115200n8\0" \
- "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \
- "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
-/* U-Boot MMC-specific configuration */ -#define EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC \
- "boot=mmc\0" \
- "mmcdev=1\0" \
- "bootpart=1:2\0" \
- "bootdir=/boot\0" \
- "rd_spec=-\0" \
- "init_mmc=run args_all args_mmc\0" \
- "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
- "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
"${bootdir}/${name_kern}\0"-/* Incorporate settings into the U-Boot environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \
- DEFAULT_MMC_TI_ARGS \
- EXTRA_ENV_AM65X_BOARD_SETTINGS \
- EXTRA_ENV_AM65X_BOARD_SETTINGS_MMC
-/* Now for the remaining common defines */ -#include <configs/ti_armv7_common.h>
-#endif /* __CONFIG_AM654_EVM_H */