On Thu, 2010-07-01 at 10:41 +0200, Prafulla Wadaskar wrote:
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Tor Krill Sent: Thursday, July 01, 2010 1:07 PM To: Albert Aribaud Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] [PATCH] orion5x: edminiv2: add libata support
On Wed, 2010-06-30 at 23:30 +0200, Albert Aribaud wrote:
Signed-off-by: Albert Aribaud albert.aribaud@free.fr
This patch:
- adds support in libata for the orion5x MVSATAHC controller;
- enables orion5x MVSTAHC port 1 on the edmini board;
- adds IDE and EXT2 commands to the edminiv2 command set.
Just a heads up. I posted a patch with a sata-driver for kirkwood a while back. (We use this with our board and it seems to work fine)
I was just trying to test it, May I know relevant board configs?
On our board we have:
/* * Disk configuration */ #define CONFIG_SATA_MV #define CONFIG_SYS_SATA_MAX_DEVICE 2
#ifdef CONFIG_SATA_MV #define CONFIG_LBA48 #define CONFIG_LIBATA #define CONFIG_CMD_SATA #define CONFIG_DOS_PARTITION #define CONFIG_CMD_EXT2 #endif
Hopefully i have not missed anything :)
Which might have some similarities to the sata controller on orion.
like egiga, we can think of having single sata driver for this.
My thoughts to.
/Tor