From: Ladislav Michl ladis@linux-mips.org
Reindent configuration header to limit line lenght to 80 characters by removing obvious and sometimes misleading comments.
Signed-off-by: Ladislav Michl ladis@linux-mips.org --- voiceblue.h | 164 +++++++++++++++++++++++++++++------------------------------- 1 file changed, 80 insertions(+), 84 deletions(-)
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index 0dde65d..d46717c 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -31,8 +31,8 @@ #define CONFIG_OMAP1510 1 /* which is in a 5910 */
/* Input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz input clock */ -#define CONFIG_XTAL_FREQ 12000000 +#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */ +#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
@@ -48,55 +48,53 @@ /* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024) +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0x10000000 +#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024) +#define PHYS_FLASH_1 0x0000000
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ - -#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */ - -/* - * FLASH organization - */ -#define CONFIG_SYS_FLASH_CFI /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/* FIXME: Does not work on AMD flash */ -/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */ /* use buffered writes (20x faster) */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max # of sectors on one chip */ - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 #define CONFIG_SYS_MONITOR_LEN (256 * 1024)
/* * Environment settings */ #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_SECT_SIZE (64 * 1024) -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SIZE (8 * 1024) +#define CONFIG_ENV_SECT_SIZE (64 * 1024) +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
#define CONFIG_ENV_OVERWRITE
/* * Size of malloc() pool and stack */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -#define CONFIG_STACKSIZE (1 * 1024 * 1024) -#define PHYS_SDRAM_1_RESERVED (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE) +#define CONFIG_STACKSIZE (1 * 1024 * 1024)
/* * Hardware drivers */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ) +#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE + #define CONFIG_NET_MULTI #define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x08000300 +#define CONFIG_SMC91111_BASE 0x08000300 + +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 512 + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_HARD_I2C #define CONFIG_SYS_I2C_SPEED 100000 @@ -104,24 +102,16 @@ #define CONFIG_DRIVER_OMAP1510_I2C
#define CONFIG_RTC_DS1307 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */ -#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */
-#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* - * Command line configuration. + * Command line configuration */ #include <config_cmd_default.h>
@@ -138,7 +128,6 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_RUN
- /* * BOOTP options */ @@ -147,36 +136,39 @@ #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_BOOTPATH
- #define CONFIG_LOOPW
#define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ -#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ +#define CONFIG_SYS_AUTOLOAD "n" #define CONFIG_BOOTCOMMAND "run nboot" #define CONFIG_PREBOOT "run setup" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "silent=1\0" \ - "ospart=0\0" \ - "bootfile=/boot/uImage\0" \ - "setpart=" \ - "if test -n $swapos; then " \ - "setenv swapos; saveenv; " \ - "if test $ospart -eq 0; then setenv ospart 1; else setenv ospart 0; fi; "\ - "fi\0" \ - "setup=setenv bootargs console=ttyS0,$baudrate " \ - "mtdparts=$mtdparts\0" \ - "nfsargs=setenv bootargs $bootargs " \ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "silent=1\0" \ + "ospart=0\0" \ + "bootfile=/boot/uImage\0" \ + "setpart=" \ + "if test -n $swapos; then " \ + "setenv swapos; saveenv; " \ + "if test $ospart -eq 0; then " \ + "setenv ospart 1; " \ + "else " \ + "setenv ospart 0; " \ + "fi; " \ + "fi\0" \ + "setup=setenv bootargs console=ttyS0,$baudrate " \ + "mtdparts=$mtdparts\0" \ + "nfsargs=setenv bootargs $bootargs " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \ - "nfsroot=$rootpath root=/dev/nfs\0" \ - "flashargs=run setpart; setenv bootargs $bootargs " \ - "root=mtd:data$ospart ro " \ - "rootfstype=jffs2\0" \ - "initrdargs=setenv bootargs $bootargs " \ + "nfsroot=$rootpath root=/dev/nfs\0" \ + "flashargs=run setpart; setenv bootargs $bootargs " \ + "root=mtd:data$ospart ro " \ + "rootfstype=jffs2\0" \ + "initrdargs=setenv bootargs $bootargs " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ - "fboot=run flashargs; chpart data$ospart; fsload; bootm\0" \ - "mboot=bootp; run initrdargs; tftp; bootm\0" \ + "fboot=run flashargs; chpart data$ospart; fsload; bootm\0" \ + "mboot=bootp; run initrdargs; tftp; bootm\0" \ "nboot=bootp; run nfsargs; tftp; bootm\0"
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ @@ -188,14 +180,14 @@ #endif
/* - * JFFS2 partitions (mtdparts command line support) + * Partitions (mtdparts command line support) */ #define CONFIG_CMD_MTDPARTS #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=omapflash.0" -#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)" - +#define MTDIDS_DEFAULT "nor0=physmap-flash.0" +#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \ + "256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)"
/* * Miscellaneous configurable options @@ -203,26 +195,30 @@ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "# " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "# " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \ + (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)) +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000)
-/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. +/* + * The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. * This time is further subdivided by a local divisor. */ -#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE -#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ -#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE +#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */ +#define CONFIG_SYS_HZ 1000
-#define OMAP5910_DPLL_DIV 1 -#define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \ - (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ) +#define OMAP5910_DPLL_DIV 1 +#define OMAP5910_DPLL_MUL \ + ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */ #define OMAP5910_LCD_DIV 2 /* CKL/4 */