Hi,
No, you must erase the flash region where the MAC address is stored.
Daniel Alomar i Claramonte Research & Development Electronic Dept. SERRA SOLDADURA, S.A. WEB Site: http://www.serrasold.com Knowledge Site: http://serratron.serrasold.com
-----Mensaje original----- De: u-boot-users-bounces@lists.sourceforge.net [mailto:u-boot-users-bounces@lists.sourceforge.net] En nombre de kabbin Enviado el: viernes, 01 de septiembre de 2006 9:58 Para: u-boot-users@lists.sourceforge.net Asunto: Re: [U-Boot-Users] eth0: Invalid ethernet MAC address
Dear all I reference to http://blackfin.uclinux.org/forum/forum.php?thread_id=2299&forum_id=51
u-boot has "eeprom" command ? But I cannot find it! as I got MAC addresses don't match. Can u-boot allow me to change HW MAC address?
Best regards.
--- kabbin kabbin26@yahoo.com.tw �f��
Dear All I faild to mount NFS, but TFTPis fine in U-boot.
//************************************************************** eth0: SMC91C94 (rev 9) at 0xc4858300 IRQ 188 [nowait] eth0: Invalid ethernet MAC address. Please set using ifconfig . . . IP-Config: Failed to open eth0 IP-Config: Guessing netmask 255.255.0.0 IP-Config: Complete: device=tap0, addr=140.92.60.146, mask=255.255.0.0,
gw=255.255.255.255,
host=140.92.60.146, domain=, nis-domain=(none), bootserver=255.255.255.255, rootserver=140.92.60.138, rootpath=Looking up port of RPC 100003/2 on 140.92.60.138 portmap: server 140.92.60.138 not responding, timed out //**************************************************************
How can I use the correct MAC address?
I have read the FAQ, so maybe there are some problems on linux kernel side. http://www.denx.de/wiki/view/DULG/EthernetDoesNotWorkInLinux I also reference to http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-July/023579.
html
But I still have no idea how to deal with it. Could someone help me please?
___________________________________________________ ��������rͨ �� ��ͨ���ʘ����������һ�θ㶨�� http://messenger.yahoo.com.tw/