The problem is clear from this IRC log, where "vickylinuxer" described his grief (so I included the log, the board really doesn't build). I also did a quick and dirty patch (follows the log, it might give you an idea where it breaks, but it's a mess -- not all is relevant and it probably breaks it even more).
Cheers
//-------- LOG ---------
05:01 < vickylinuxer> guys i am making u-boot for at91sam9263 with ubifs support...which u-boot version i can prefer... 05:02 < vickylinuxer> because u-boot-12-2010 gave so many compilation problems... 05:06 < Marex> vickylinuxer: look ... what's the problem ? what board did you config it for ? 05:06 < Marex> vickylinuxer: give me the exact xyz for xyz_config 05:10 < vickylinuxer> at91sam9263_nandflash 05:11 < vickylinuxer> atmel board 05:11 < Marex> compiling, checking ... please wait 05:12 < Marex> I see 05:12 < Marex> vickylinuxer: it'll take a bit to fix it all ... wanna tinker with it and assist in fixing ? 05:38 < vickylinuxer> yes marex i want to update from ver 2010.09 to 2010.12..but 09 is working good... 05:39 < vickylinuxer> but when compiling uboot-12 i m getting sdram error and so on... 05:51 < Marex> vickylinuxer: ok well ... there seems to be more breakage than I expected 05:57 < Marex> vickylinuxer: try this http://pastebin.com/2Rq92nNg
//-------- DIFF ---------
diff --git a/config.mk b/config.mk index 5147c35..fe1d40c 100644 --- a/config.mk +++ b/config.mk @@ -261,7 +261,7 @@ $(obj)%.s: %.c
# If the list of objects to link is empty, just create an empty built-in.o cmd_link_o_target = $(if $(strip $1),\ - $(LD) $(LDFLAGS) -r -o $@ $1,\ + $(LD) -r -o $@ $1,\ rm -f $@; $(AR) rcs $@ )
######################################################################### diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index bfa1f3a..1cc8bc0 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -23,6 +23,7 @@
#include <asm/io.h> #include <asm/arch/clk.h> +#include <asm/arch/hardware.h> #include <asm/arch/memory-map.h>
#if defined(CONFIG_USART0) diff --git a/drivers/spi/atmel_dataflash_spi.c b/drivers/spi/atmel_dataflash_spi.c index 4a5c4aa..d5215c0 100644 --- a/drivers/spi/atmel_dataflash_spi.c +++ b/drivers/spi/atmel_dataflash_spi.c @@ -158,12 +158,12 @@ unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) }
/* arm simple, non interrupt dependent timer */ - reset_timer_masked(); + reset_timer(); timeout = 0;
writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR); while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) && - ((timeout = get_timer_masked()) < CONFIG_SYS_SPI_WRITE_TOUT)); + ((timeout = get_timer(0)) < CONFIG_SYS_SPI_WRITE_TOUT)); writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); pDesc->state = IDLE;
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index f6cb406..3db8bd0 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -27,6 +27,9 @@ #ifndef __CONFIG_H #define __CONFIG_H
+#define CONFIG_AT91_LEGACY +#define CONFIG_AT91FAMILY + /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ #define CONFIG_SYS_HZ 1000 @@ -341,6 +344,10 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ + GENERATED_GBL_DATA_SIZE) + #define CONFIG_STACKSIZE (32*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ