These changes get the SDHCI hardware on the AST2600 and AST2500 working using the same device tree layout as upstream Linux.
The series has been tested on the Qemu models of the ast2500-evb and ast2600-evb, and tested on the ast2600a3-evb hardware.
Joel Stanley (9): ARM: dts: ast2600: Update SDHCI nodes ARM: dts: ast2500: Update SDHCI nodes clk/aspeed: Add debug message when clock fails clk/ast2600: Adjust eMMC clock names clk/ast2500: Add SD clock mmc/aspeed: Add debuging for clock probe failures mmc/aspeed: Probe from controller mmc/aspeed: Enable controller clocks config/ast2600: Enable eMMC related boot options
drivers/clk/aspeed/clk_ast2500.c | 26 +++++++++++++++ drivers/clk/aspeed/clk_ast2600.c | 8 ++--- drivers/mmc/aspeed_sdhci.c | 45 +++++++++++++++++++++++-- arch/arm/dts/ast2500-evb.dts | 4 +++ arch/arm/dts/ast2500-u-boot.dtsi | 25 -------------- arch/arm/dts/ast2500.dtsi | 28 ++++++++++++++++ arch/arm/dts/ast2600-evb.dts | 24 ++++++-------- arch/arm/dts/ast2600.dtsi | 57 ++++++++++++++------------------ configs/evb-ast2600_defconfig | 13 ++++++++ drivers/mmc/Kconfig | 1 + 10 files changed, 154 insertions(+), 77 deletions(-)