Hello Lubomir,
Am 06.11.2013 14:19, schrieb Lubomir Popov:
On 06-Nov-13 14:12, Nikita Kiryanov wrote:
In drivers/i2c/omap24xx_i2c.c there are a few checks that attempt to detect unconfigured pads for the i2c bus in use. These checks are all in the form of
if (status == I2C_STAT_XRDY) { printf("unconfigured pads\n"); return -1; }
This check seems peculiar to me since the meaning of I2C_STAT_XRDY is that new data is requested for transmission. Why is that indication that the bus is not padconf'd for I2C?
Hi Nikita,
This has been empirically confirmed on OMAP4 and OMAP5. When the pads are not configured, the I2C controller is actually disconnected from the bus. The clock input for its state machine has to come from the bus however due to stretching etc., although it is internally generated. So actually nothing changes within the controller after a transaction attempt is made, and it keeps its initial state with XRDY set only (ready to accept transmit data). I use this as an indicator. Not perfect, but works in most cases.
Thanks for this explanation! Maybe we can document this somewhere in the code?
bye, Heiko