From: Jerome Brunet jbrunet@baylibre.com
We are about to add support for the Amlogic AXG SoC. While very close to the Gx SoC family, we will need to handle a few thing which are different in this SoC. Rework the meson arch directory to prepare for this.
Signed-off-by: Jerome Brunet jbrunet@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- arch/arm/include/asm/arch-meson/clock-gx.h | 117 +++++++++++++++++++++++++ arch/arm/include/asm/arch-meson/clock.h | 117 ------------------------- arch/arm/include/asm/arch-meson/eth.h | 6 +- arch/arm/include/asm/arch-meson/mem.h | 3 +- arch/arm/mach-meson/Kconfig | 10 ++- arch/arm/mach-meson/Makefile | 3 +- arch/arm/mach-meson/board-common.c | 56 ++++++++++++ arch/arm/mach-meson/board-gx.c | 132 +++++++++++++++++++++++++++++ arch/arm/mach-meson/board.c | 130 ---------------------------- arch/arm/mach-meson/eth.c | 53 ------------ arch/arm/mach-meson/sm.c | 1 - board/amlogic/odroid-c2/odroid-c2.c | 6 +- board/amlogic/p212/p212.c | 6 +- board/amlogic/q200/q200.c | 4 +- drivers/clk/clk_meson.c | 2 +- 15 files changed, 328 insertions(+), 318 deletions(-) create mode 100644 arch/arm/include/asm/arch-meson/clock-gx.h delete mode 100644 arch/arm/include/asm/arch-meson/clock.h create mode 100644 arch/arm/mach-meson/board-common.c create mode 100644 arch/arm/mach-meson/board-gx.c delete mode 100644 arch/arm/mach-meson/board.c delete mode 100644 arch/arm/mach-meson/eth.c
diff --git a/arch/arm/include/asm/arch-meson/clock-gx.h b/arch/arm/include/asm/arch-meson/clock-gx.h new file mode 100644 index 0000000..13a2e76 --- /dev/null +++ b/arch/arm/include/asm/arch-meson/clock-gx.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2016 - AmLogic, Inc. + * Copyright 2018 - Beniamino Galvani b.galvani@gmail.com + */ +#ifndef _ARCH_MESON_CLOCK_GX_H_ +#define _ARCH_MESON_CLOCK_GX_H_ + +/* + * Clock controller register offsets + * + * Register offsets from the data sheet are listed in comment blocks below. + * Those offsets must be multiplied by 4 before adding them to the base address + * to get the right value + */ +#define SCR 0x2C /* 0x0b offset in data sheet */ +#define TIMEOUT_VALUE 0x3c /* 0x0f offset in data sheet */ + +#define HHI_GP0_PLL_CNTL 0x40 /* 0x10 offset in data sheet */ +#define HHI_GP0_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */ +#define HHI_GP0_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */ +#define HHI_GP0_PLL_CNTL4 0x4c /* 0x13 offset in data sheet */ +#define HHI_GP0_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */ +#define HHI_GP0_PLL_CNTL1 0x58 /* 0x16 offset in data sheet */ + +#define HHI_XTAL_DIVN_CNTL 0xbc /* 0x2f offset in data sheet */ +#define HHI_TIMER90K 0xec /* 0x3b offset in data sheet */ + +#define HHI_MEM_PD_REG0 0x100 /* 0x40 offset in data sheet */ +#define HHI_MEM_PD_REG1 0x104 /* 0x41 offset in data sheet */ +#define HHI_VPU_MEM_PD_REG1 0x108 /* 0x42 offset in data sheet */ +#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */ +#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */ + +#define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */ +#define HHI_GCLK_MPEG1 0x144 /* 0x51 offset in data sheet */ +#define HHI_GCLK_MPEG2 0x148 /* 0x52 offset in data sheet */ +#define HHI_GCLK_OTHER 0x150 /* 0x54 offset in data sheet */ +#define HHI_GCLK_AO 0x154 /* 0x55 offset in data sheet */ +#define HHI_SYS_OSCIN_CNTL 0x158 /* 0x56 offset in data sheet */ +#define HHI_SYS_CPU_CLK_CNTL1 0x15c /* 0x57 offset in data sheet */ +#define HHI_SYS_CPU_RESET_CNTL 0x160 /* 0x58 offset in data sheet */ +#define HHI_VID_CLK_DIV 0x164 /* 0x59 offset in data sheet */ + +#define HHI_MPEG_CLK_CNTL 0x174 /* 0x5d offset in data sheet */ +#define HHI_AUD_CLK_CNTL 0x178 /* 0x5e offset in data sheet */ +#define HHI_VID_CLK_CNTL 0x17c /* 0x5f offset in data sheet */ +#define HHI_AUD_CLK_CNTL2 0x190 /* 0x64 offset in data sheet */ +#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */ +#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */ +#define HHI_VID_PLL_CLK_DIV 0x1a0 /* 0x68 offset in data sheet */ +#define HHI_AUD_CLK_CNTL3 0x1a4 /* 0x69 offset in data sheet */ +#define HHI_MALI_CLK_CNTL 0x1b0 /* 0x6c offset in data sheet */ +#define HHI_VPU_CLK_CNTL 0x1bC /* 0x6f offset in data sheet */ + +#define HHI_HDMI_CLK_CNTL 0x1CC /* 0x73 offset in data sheet */ +#define HHI_VDEC_CLK_CNTL 0x1E0 /* 0x78 offset in data sheet */ +#define HHI_VDEC2_CLK_CNTL 0x1E4 /* 0x79 offset in data sheet */ +#define HHI_VDEC3_CLK_CNTL 0x1E8 /* 0x7a offset in data sheet */ +#define HHI_VDEC4_CLK_CNTL 0x1EC /* 0x7b offset in data sheet */ +#define HHI_HDCP22_CLK_CNTL 0x1F0 /* 0x7c offset in data sheet */ +#define HHI_VAPBCLK_CNTL 0x1F4 /* 0x7d offset in data sheet */ + +#define HHI_VPU_CLKB_CNTL 0x20C /* 0x83 offset in data sheet */ +#define HHI_USB_CLK_CNTL 0x220 /* 0x88 offset in data sheet */ +#define HHI_32K_CLK_CNTL 0x224 /* 0x89 offset in data sheet */ +#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */ +#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */ + +#define HHI_PCM_CLK_CNTL 0x258 /* 0x96 offset in data sheet */ +#define HHI_NAND_CLK_CNTL 0x25C /* 0x97 offset in data sheet */ +#define HHI_SD_EMMC_CLK_CNTL 0x264 /* 0x99 offset in data sheet */ + +#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */ +#define HHI_MPLL_CNTL2 0x284 /* 0xa1 offset in data sheet */ +#define HHI_MPLL_CNTL3 0x288 /* 0xa2 offset in data sheet */ +#define HHI_MPLL_CNTL4 0x28C /* 0xa3 offset in data sheet */ +#define HHI_MPLL_CNTL5 0x290 /* 0xa4 offset in data sheet */ +#define HHI_MPLL_CNTL6 0x294 /* 0xa5 offset in data sheet */ +#define HHI_MPLL_CNTL7 0x298 /* 0xa6 offset in data sheet */ +#define HHI_MPLL_CNTL8 0x29C /* 0xa7 offset in data sheet */ +#define HHI_MPLL_CNTL9 0x2A0 /* 0xa8 offset in data sheet */ +#define HHI_MPLL_CNTL10 0x2A4 /* 0xa9 offset in data sheet */ + +#define HHI_MPLL3_CNTL0 0x2E0 /* 0xb8 offset in data sheet */ +#define HHI_MPLL3_CNTL1 0x2E4 /* 0xb9 offset in data sheet */ +#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */ +#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */ + +#define HHI_SYS_PLL_CNTL 0x300 /* 0xc0 offset in data sheet */ +#define HHI_SYS_PLL_CNTL2 0x304 /* 0xc1 offset in data sheet */ +#define HHI_SYS_PLL_CNTL3 0x308 /* 0xc2 offset in data sheet */ +#define HHI_SYS_PLL_CNTL4 0x30c /* 0xc3 offset in data sheet */ +#define HHI_SYS_PLL_CNTL5 0x310 /* 0xc4 offset in data sheet */ +#define HHI_DPLL_TOP_I 0x318 /* 0xc6 offset in data sheet */ +#define HHI_DPLL_TOP2_I 0x31C /* 0xc7 offset in data sheet */ +#define HHI_HDMI_PLL_CNTL 0x320 /* 0xc8 offset in data sheet */ +#define HHI_HDMI_PLL_CNTL2 0x324 /* 0xc9 offset in data sheet */ +#define HHI_HDMI_PLL_CNTL3 0x328 /* 0xca offset in data sheet */ +#define HHI_HDMI_PLL_CNTL4 0x32C /* 0xcb offset in data sheet */ +#define HHI_HDMI_PLL_CNTL5 0x330 /* 0xcc offset in data sheet */ +#define HHI_HDMI_PLL_CNTL6 0x334 /* 0xcd offset in data sheet */ +#define HHI_HDMI_PLL_CNTL_I 0x338 /* 0xce offset in data sheet */ +#define HHI_HDMI_PLL_CNTL7 0x33C /* 0xcf offset in data sheet */ + +#define HHI_HDMI_PHY_CNTL0 0x3A0 /* 0xe8 offset in data sheet */ +#define HHI_HDMI_PHY_CNTL1 0x3A4 /* 0xe9 offset in data sheet */ +#define HHI_HDMI_PHY_CNTL2 0x3A8 /* 0xea offset in data sheet */ +#define HHI_HDMI_PHY_CNTL3 0x3AC /* 0xeb offset in data sheet */ + +#define HHI_VID_LOCK_CLK_CNTL 0x3C8 /* 0xf2 offset in data sheet */ +#define HHI_BT656_CLK_CNTL 0x3D4 /* 0xf5 offset in data sheet */ +#define HHI_SAR_CLK_CNTL 0x3D8 /* 0xf6 offset in data sheet */ + +ulong meson_measure_clk_rate(unsigned int clk); + +#endif diff --git a/arch/arm/include/asm/arch-meson/clock.h b/arch/arm/include/asm/arch-meson/clock.h deleted file mode 100644 index c0ff00f..0000000 --- a/arch/arm/include/asm/arch-meson/clock.h +++ /dev/null @@ -1,117 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2016 - AmLogic, Inc. - * Copyright 2018 - Beniamino Galvani b.galvani@gmail.com - */ -#ifndef _ARCH_MESON_CLOCK_H_ -#define _ARCH_MESON_CLOCK_H_ - -/* - * Clock controller register offsets - * - * Register offsets from the data sheet are listed in comment blocks below. - * Those offsets must be multiplied by 4 before adding them to the base address - * to get the right value - */ -#define SCR 0x2C /* 0x0b offset in data sheet */ -#define TIMEOUT_VALUE 0x3c /* 0x0f offset in data sheet */ - -#define HHI_GP0_PLL_CNTL 0x40 /* 0x10 offset in data sheet */ -#define HHI_GP0_PLL_CNTL2 0x44 /* 0x11 offset in data sheet */ -#define HHI_GP0_PLL_CNTL3 0x48 /* 0x12 offset in data sheet */ -#define HHI_GP0_PLL_CNTL4 0x4c /* 0x13 offset in data sheet */ -#define HHI_GP0_PLL_CNTL5 0x50 /* 0x14 offset in data sheet */ -#define HHI_GP0_PLL_CNTL1 0x58 /* 0x16 offset in data sheet */ - -#define HHI_XTAL_DIVN_CNTL 0xbc /* 0x2f offset in data sheet */ -#define HHI_TIMER90K 0xec /* 0x3b offset in data sheet */ - -#define HHI_MEM_PD_REG0 0x100 /* 0x40 offset in data sheet */ -#define HHI_MEM_PD_REG1 0x104 /* 0x41 offset in data sheet */ -#define HHI_VPU_MEM_PD_REG1 0x108 /* 0x42 offset in data sheet */ -#define HHI_VIID_CLK_DIV 0x128 /* 0x4a offset in data sheet */ -#define HHI_VIID_CLK_CNTL 0x12c /* 0x4b offset in data sheet */ - -#define HHI_GCLK_MPEG0 0x140 /* 0x50 offset in data sheet */ -#define HHI_GCLK_MPEG1 0x144 /* 0x51 offset in data sheet */ -#define HHI_GCLK_MPEG2 0x148 /* 0x52 offset in data sheet */ -#define HHI_GCLK_OTHER 0x150 /* 0x54 offset in data sheet */ -#define HHI_GCLK_AO 0x154 /* 0x55 offset in data sheet */ -#define HHI_SYS_OSCIN_CNTL 0x158 /* 0x56 offset in data sheet */ -#define HHI_SYS_CPU_CLK_CNTL1 0x15c /* 0x57 offset in data sheet */ -#define HHI_SYS_CPU_RESET_CNTL 0x160 /* 0x58 offset in data sheet */ -#define HHI_VID_CLK_DIV 0x164 /* 0x59 offset in data sheet */ - -#define HHI_MPEG_CLK_CNTL 0x174 /* 0x5d offset in data sheet */ -#define HHI_AUD_CLK_CNTL 0x178 /* 0x5e offset in data sheet */ -#define HHI_VID_CLK_CNTL 0x17c /* 0x5f offset in data sheet */ -#define HHI_AUD_CLK_CNTL2 0x190 /* 0x64 offset in data sheet */ -#define HHI_VID_CLK_CNTL2 0x194 /* 0x65 offset in data sheet */ -#define HHI_SYS_CPU_CLK_CNTL0 0x19c /* 0x67 offset in data sheet */ -#define HHI_VID_PLL_CLK_DIV 0x1a0 /* 0x68 offset in data sheet */ -#define HHI_AUD_CLK_CNTL3 0x1a4 /* 0x69 offset in data sheet */ -#define HHI_MALI_CLK_CNTL 0x1b0 /* 0x6c offset in data sheet */ -#define HHI_VPU_CLK_CNTL 0x1bC /* 0x6f offset in data sheet */ - -#define HHI_HDMI_CLK_CNTL 0x1CC /* 0x73 offset in data sheet */ -#define HHI_VDEC_CLK_CNTL 0x1E0 /* 0x78 offset in data sheet */ -#define HHI_VDEC2_CLK_CNTL 0x1E4 /* 0x79 offset in data sheet */ -#define HHI_VDEC3_CLK_CNTL 0x1E8 /* 0x7a offset in data sheet */ -#define HHI_VDEC4_CLK_CNTL 0x1EC /* 0x7b offset in data sheet */ -#define HHI_HDCP22_CLK_CNTL 0x1F0 /* 0x7c offset in data sheet */ -#define HHI_VAPBCLK_CNTL 0x1F4 /* 0x7d offset in data sheet */ - -#define HHI_VPU_CLKB_CNTL 0x20C /* 0x83 offset in data sheet */ -#define HHI_USB_CLK_CNTL 0x220 /* 0x88 offset in data sheet */ -#define HHI_32K_CLK_CNTL 0x224 /* 0x89 offset in data sheet */ -#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */ -#define HHI_GEN_CLK_CNTL 0x228 /* 0x8a offset in data sheet */ - -#define HHI_PCM_CLK_CNTL 0x258 /* 0x96 offset in data sheet */ -#define HHI_NAND_CLK_CNTL 0x25C /* 0x97 offset in data sheet */ -#define HHI_SD_EMMC_CLK_CNTL 0x264 /* 0x99 offset in data sheet */ - -#define HHI_MPLL_CNTL 0x280 /* 0xa0 offset in data sheet */ -#define HHI_MPLL_CNTL2 0x284 /* 0xa1 offset in data sheet */ -#define HHI_MPLL_CNTL3 0x288 /* 0xa2 offset in data sheet */ -#define HHI_MPLL_CNTL4 0x28C /* 0xa3 offset in data sheet */ -#define HHI_MPLL_CNTL5 0x290 /* 0xa4 offset in data sheet */ -#define HHI_MPLL_CNTL6 0x294 /* 0xa5 offset in data sheet */ -#define HHI_MPLL_CNTL7 0x298 /* 0xa6 offset in data sheet */ -#define HHI_MPLL_CNTL8 0x29C /* 0xa7 offset in data sheet */ -#define HHI_MPLL_CNTL9 0x2A0 /* 0xa8 offset in data sheet */ -#define HHI_MPLL_CNTL10 0x2A4 /* 0xa9 offset in data sheet */ - -#define HHI_MPLL3_CNTL0 0x2E0 /* 0xb8 offset in data sheet */ -#define HHI_MPLL3_CNTL1 0x2E4 /* 0xb9 offset in data sheet */ -#define HHI_VDAC_CNTL0 0x2F4 /* 0xbd offset in data sheet */ -#define HHI_VDAC_CNTL1 0x2F8 /* 0xbe offset in data sheet */ - -#define HHI_SYS_PLL_CNTL 0x300 /* 0xc0 offset in data sheet */ -#define HHI_SYS_PLL_CNTL2 0x304 /* 0xc1 offset in data sheet */ -#define HHI_SYS_PLL_CNTL3 0x308 /* 0xc2 offset in data sheet */ -#define HHI_SYS_PLL_CNTL4 0x30c /* 0xc3 offset in data sheet */ -#define HHI_SYS_PLL_CNTL5 0x310 /* 0xc4 offset in data sheet */ -#define HHI_DPLL_TOP_I 0x318 /* 0xc6 offset in data sheet */ -#define HHI_DPLL_TOP2_I 0x31C /* 0xc7 offset in data sheet */ -#define HHI_HDMI_PLL_CNTL 0x320 /* 0xc8 offset in data sheet */ -#define HHI_HDMI_PLL_CNTL2 0x324 /* 0xc9 offset in data sheet */ -#define HHI_HDMI_PLL_CNTL3 0x328 /* 0xca offset in data sheet */ -#define HHI_HDMI_PLL_CNTL4 0x32C /* 0xcb offset in data sheet */ -#define HHI_HDMI_PLL_CNTL5 0x330 /* 0xcc offset in data sheet */ -#define HHI_HDMI_PLL_CNTL6 0x334 /* 0xcd offset in data sheet */ -#define HHI_HDMI_PLL_CNTL_I 0x338 /* 0xce offset in data sheet */ -#define HHI_HDMI_PLL_CNTL7 0x33C /* 0xcf offset in data sheet */ - -#define HHI_HDMI_PHY_CNTL0 0x3A0 /* 0xe8 offset in data sheet */ -#define HHI_HDMI_PHY_CNTL1 0x3A4 /* 0xe9 offset in data sheet */ -#define HHI_HDMI_PHY_CNTL2 0x3A8 /* 0xea offset in data sheet */ -#define HHI_HDMI_PHY_CNTL3 0x3AC /* 0xeb offset in data sheet */ - -#define HHI_VID_LOCK_CLK_CNTL 0x3C8 /* 0xf2 offset in data sheet */ -#define HHI_BT656_CLK_CNTL 0x3D4 /* 0xf5 offset in data sheet */ -#define HHI_SAR_CLK_CNTL 0x3D8 /* 0xf6 offset in data sheet */ - -ulong meson_measure_clk_rate(unsigned int clk); - -#endif diff --git a/arch/arm/include/asm/arch-meson/eth.h b/arch/arm/include/asm/arch-meson/eth.h index 1aa0872..08acc5c 100644 --- a/arch/arm/include/asm/arch-meson/eth.h +++ b/arch/arm/include/asm/arch-meson/eth.h @@ -10,13 +10,13 @@ #include <phy.h>
enum { - /* Use GXL Internal RMII PHY */ - MESON_GXL_USE_INTERNAL_RMII_PHY = 1, + /* Use Internal RMII PHY */ + MESON_USE_INTERNAL_RMII_PHY = 1, };
/* Configure the Ethernet MAC with the requested interface mode * with some optional flags. */ -void meson_gx_eth_init(phy_interface_t mode, unsigned int flags); +void meson_eth_init(phy_interface_t mode, unsigned int flags);
#endif /* __MESON_ETH_H__ */ diff --git a/arch/arm/include/asm/arch-meson/mem.h b/arch/arm/include/asm/arch-meson/mem.h index 6281833..a65100a 100644 --- a/arch/arm/include/asm/arch-meson/mem.h +++ b/arch/arm/include/asm/arch-meson/mem.h @@ -10,6 +10,7 @@ /* Configure the reserved memory zones exported by the secure registers * into EFI and DTB reserved memory entries. */ -void meson_gx_init_reserved_memory(void *fdt); +void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size); +void meson_init_reserved_memory(void *fdt);
#endif /* __MESON_MEM_H__ */ diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 6f60167..6225417 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -8,25 +8,29 @@ config MESON64_COMMON select DM_SERIAL imply CMD_DM
+config MESON_GX + bool + select MESON64_COMMON + choice prompt "Platform select" default MESON_GXBB
config MESON_GXBB bool "GXBB" - select MESON64_COMMON + select MESON_GX help Select this if your SoC is an S905
config MESON_GXL bool "GXL" - select MESON64_COMMON + select MESON_GX help Select this if your SoC is an S905X/D or S805X
config MESON_GXM bool "GXM" - select MESON64_COMMON + select MESON_GX help Select this if your SoC is an S912
diff --git a/arch/arm/mach-meson/Makefile b/arch/arm/mach-meson/Makefile index 8ad9b3e..78345b4 100644 --- a/arch/arm/mach-meson/Makefile +++ b/arch/arm/mach-meson/Makefile @@ -2,4 +2,5 @@ # # Copyright (c) 2016 Beniamino Galvani b.galvani@gmail.com
-obj-y += board.o sm.o eth.o +obj-y += board-common.o sm.o +obj-$(CONFIG_MESON_GX) += board-gx.o diff --git a/arch/arm/mach-meson/board-common.c b/arch/arm/mach-meson/board-common.c new file mode 100644 index 0000000..0446507 --- /dev/null +++ b/arch/arm/mach-meson/board-common.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2016 Beniamino Galvani b.galvani@gmail.com + */ + +#include <common.h> +#include <linux/libfdt.h> +#include <linux/err.h> +#include <asm/arch/mem.h> +#include <asm/arch/sm.h> +#include <asm/armv8/mmu.h> +#include <asm/unaligned.h> +#include <efi_loader.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + const fdt64_t *val; + int offset; + int len; + + offset = fdt_path_offset(gd->fdt_blob, "/memory"); + if (offset < 0) + return -EINVAL; + + val = fdt_getprop(gd->fdt_blob, offset, "reg", &len); + if (len < sizeof(*val) * 2) + return -EINVAL; + + /* Use unaligned access since cache is still disabled */ + gd->ram_size = get_unaligned_be64(&val[1]); + + return 0; +} + +void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size) +{ + int ret; + + ret = fdt_add_mem_rsv(fdt, start, size); + if (ret) + printf("Could not reserve zone @ 0x%llx\n", start); + + if (IS_ENABLED(CONFIG_EFI_LOADER)) { + efi_add_memory_map(start, + ALIGN(size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT, + EFI_RESERVED_MEMORY_TYPE, false); + } +} + +void reset_cpu(ulong addr) +{ + psci_system_reset(); +} + diff --git a/arch/arm/mach-meson/board-gx.c b/arch/arm/mach-meson/board-gx.c new file mode 100644 index 0000000..f1397f8 --- /dev/null +++ b/arch/arm/mach-meson/board-gx.c @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2016 Beniamino Galvani b.galvani@gmail.com + * (C) Copyright 2018 Neil Armstrong narmstrong@baylibre.com + */ + +#include <common.h> +#include <asm/arch/eth.h> +#include <asm/arch/gx.h> +#include <asm/arch/mem.h> +#include <asm/io.h> +#include <asm/armv8/mmu.h> +#include <linux/sizes.h> +#include <phy.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Configure the reserved memory zones exported by the secure registers + * into EFI and DTB reserved memory entries. + */ +void meson_init_reserved_memory(void *fdt) +{ + u64 bl31_size, bl31_start; + u64 bl32_size, bl32_start; + u32 reg; + + /* + * Get ARM Trusted Firmware reserved memory zones in : + * - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0 + * - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL + * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL + */ + reg = readl(GX_AO_SEC_GP_CFG3); + + bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK) + >> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K; + bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K; + + bl31_start = readl(GX_AO_SEC_GP_CFG5); + bl32_start = readl(GX_AO_SEC_GP_CFG4); + + /* + * Early Meson GX Firmware revisions did not provide the reserved + * memory zones in the registers, keep fixed memory zone handling. + */ + if (IS_ENABLED(CONFIG_MESON_GX) && + !reg && !bl31_start && !bl32_start) { + bl31_start = 0x10000000; + bl31_size = 0x200000; + } + + /* Add first 16MiB reserved zone */ + meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE); + + /* Add BL31 reserved zone */ + if (bl31_start && bl31_size) + meson_board_add_reserved_memory(fdt, bl31_start, bl31_size); + + /* Add BL32 reserved zone */ + if (bl32_start && bl32_size) + meson_board_add_reserved_memory(fdt, bl32_start, bl32_size); +} + +phys_size_t get_effective_memsize(void) +{ + /* Size is reported in MiB, convert it in bytes */ + return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK) + >> GX_AO_MEM_SIZE_SHIFT) * SZ_1M; +} + +static struct mm_region gx_mem_map[] = { + { + .virt = 0x0UL, + .phys = 0x0UL, + .size = 0xc0000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, { + .virt = 0xc0000000UL, + .phys = 0xc0000000UL, + .size = 0x30000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* List terminator */ + 0, + } +}; + +struct mm_region *mem_map = gx_mem_map; + +/* Configure the Ethernet MAC with the requested interface mode + * with some optional flags. + */ +void meson_eth_init(phy_interface_t mode, unsigned int flags) +{ + switch (mode) { + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + /* Set RGMII mode */ + setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF | + GX_ETH_REG_0_TX_PHASE(1) | + GX_ETH_REG_0_TX_RATIO(4) | + GX_ETH_REG_0_PHY_CLK_EN | + GX_ETH_REG_0_CLK_EN); + break; + + case PHY_INTERFACE_MODE_RMII: + /* Set RMII mode */ + out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK | + GX_ETH_REG_0_CLK_EN); + + /* Use GXL RMII Internal PHY */ + if (IS_ENABLED(CONFIG_MESON_GXL) && + (flags & MESON_USE_INTERNAL_RMII_PHY)) { + writel(0x10110181, GX_ETH_REG_2); + writel(0xe40908ff, GX_ETH_REG_3); + } + + break; + + default: + printf("Invalid Ethernet interface mode\n"); + return; + } + + /* Enable power gate */ + clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK); +} diff --git a/arch/arm/mach-meson/board.c b/arch/arm/mach-meson/board.c deleted file mode 100644 index d6c6253..0000000 --- a/arch/arm/mach-meson/board.c +++ /dev/null @@ -1,130 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2016 Beniamino Galvani b.galvani@gmail.com - */ - -#include <common.h> -#include <linux/libfdt.h> -#include <linux/err.h> -#include <asm/arch/gx.h> -#include <asm/arch/sm.h> -#include <asm/armv8/mmu.h> -#include <asm/unaligned.h> -#include <linux/sizes.h> -#include <efi_loader.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - const fdt64_t *val; - int offset; - int len; - - offset = fdt_path_offset(gd->fdt_blob, "/memory"); - if (offset < 0) - return -EINVAL; - - val = fdt_getprop(gd->fdt_blob, offset, "reg", &len); - if (len < sizeof(*val) * 2) - return -EINVAL; - - /* Use unaligned access since cache is still disabled */ - gd->ram_size = get_unaligned_be64(&val[1]); - - return 0; -} - -phys_size_t get_effective_memsize(void) -{ - /* Size is reported in MiB, convert it in bytes */ - return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK) - >> GX_AO_MEM_SIZE_SHIFT) * SZ_1M; -} - -static void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size) -{ - int ret; - - ret = fdt_add_mem_rsv(fdt, start, size); - if (ret) - printf("Could not reserve zone @ 0x%llx\n", start); - - if (IS_ENABLED(CONFIG_EFI_LOADER)) { - efi_add_memory_map(start, - ALIGN(size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT, - EFI_RESERVED_MEMORY_TYPE, false); - } -} - -void meson_gx_init_reserved_memory(void *fdt) -{ - u64 bl31_size, bl31_start; - u64 bl32_size, bl32_start; - u32 reg; - - /* - * Get ARM Trusted Firmware reserved memory zones in : - * - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0 - * - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL - * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL - */ - - reg = readl(GX_AO_SEC_GP_CFG3); - - bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK) - >> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K; - bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K; - - bl31_start = readl(GX_AO_SEC_GP_CFG5); - bl32_start = readl(GX_AO_SEC_GP_CFG4); - - /* - * Early Meson GX Firmware revisions did not provide the reserved - * memory zones in the registers, keep fixed memory zone handling. - */ - if (IS_ENABLED(CONFIG_MESON_GX) && - !reg && !bl31_start && !bl32_start) { - bl31_start = 0x10000000; - bl31_size = 0x200000; - } - - /* Add first 16MiB reserved zone */ - meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE); - - /* Add BL31 reserved zone */ - if (bl31_start && bl31_size) - meson_board_add_reserved_memory(fdt, bl31_start, bl31_size); - - /* Add BL32 reserved zone */ - if (bl32_start && bl32_size) - meson_board_add_reserved_memory(fdt, bl32_start, bl32_size); -} - -void reset_cpu(ulong addr) -{ - psci_system_reset(); -} - -static struct mm_region gx_mem_map[] = { - { - .virt = 0x0UL, - .phys = 0x0UL, - .size = 0xc0000000UL, - .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | - PTE_BLOCK_INNER_SHARE - }, { - .virt = 0xc0000000UL, - .phys = 0xc0000000UL, - .size = 0x30000000UL, - .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | - PTE_BLOCK_NON_SHARE | - PTE_BLOCK_PXN | PTE_BLOCK_UXN - }, { - /* List terminator */ - 0, - } -}; - -struct mm_region *mem_map = gx_mem_map; diff --git a/arch/arm/mach-meson/eth.c b/arch/arm/mach-meson/eth.c deleted file mode 100644 index 8b28bc8..0000000 --- a/arch/arm/mach-meson/eth.c +++ /dev/null @@ -1,53 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2016 BayLibre, SAS - * Author: Neil Armstrong narmstrong@baylibre.com - */ - -#include <common.h> -#include <dm.h> -#include <asm/io.h> -#include <asm/arch/gx.h> -#include <asm/arch/eth.h> -#include <phy.h> - -/* Configure the Ethernet MAC with the requested interface mode - * with some optional flags. - */ -void meson_gx_eth_init(phy_interface_t mode, unsigned int flags) -{ - switch (mode) { - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: - /* Set RGMII mode */ - setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF | - GX_ETH_REG_0_TX_PHASE(1) | - GX_ETH_REG_0_TX_RATIO(4) | - GX_ETH_REG_0_PHY_CLK_EN | - GX_ETH_REG_0_CLK_EN); - break; - - case PHY_INTERFACE_MODE_RMII: - /* Set RMII mode */ - out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK | - GX_ETH_REG_0_CLK_EN); - - /* Use GXL RMII Internal PHY */ - if (IS_ENABLED(CONFIG_MESON_GXL) && - (flags & MESON_GXL_USE_INTERNAL_RMII_PHY)) { - writel(0x10110181, GX_ETH_REG_2); - writel(0xe40908ff, GX_ETH_REG_3); - } - - break; - - default: - printf("Invalid Ethernet interface mode\n"); - return; - } - - /* Enable power gate */ - clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK); -} diff --git a/arch/arm/mach-meson/sm.c b/arch/arm/mach-meson/sm.c index 0bba5e4..a07b468 100644 --- a/arch/arm/mach-meson/sm.c +++ b/arch/arm/mach-meson/sm.c @@ -6,7 +6,6 @@ */
#include <common.h> -#include <asm/arch/gx.h> #include <linux/kernel.h>
#define FN_GET_SHARE_MEM_INPUT_BASE 0x82000020 diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c index 2a2755c..d784d6b 100644 --- a/board/amlogic/odroid-c2/odroid-c2.c +++ b/board/amlogic/odroid-c2/odroid-c2.c @@ -28,7 +28,7 @@ int misc_init_r(void) char serial[EFUSE_SN_SIZE]; ssize_t len;
- meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); + meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, @@ -40,7 +40,7 @@ int misc_init_r(void) if (!env_get("serial#")) { len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, EFUSE_SN_SIZE); - if (len == EFUSE_SN_SIZE) + if (len == EFUSE_SN_SIZE) env_set("serial#", serial); }
@@ -49,7 +49,7 @@ int misc_init_r(void)
int ft_board_setup(void *blob, bd_t *bd) { - meson_gx_init_reserved_memory(blob); + meson_init_reserved_memory(blob);
return 0; } diff --git a/board/amlogic/p212/p212.c b/board/amlogic/p212/p212.c index 00e07d7..33992a2 100644 --- a/board/amlogic/p212/p212.c +++ b/board/amlogic/p212/p212.c @@ -29,8 +29,8 @@ int misc_init_r(void) char serial[EFUSE_SN_SIZE]; ssize_t len;
- meson_gx_eth_init(PHY_INTERFACE_MODE_RMII, - MESON_GXL_USE_INTERNAL_RMII_PHY); + meson_eth_init(PHY_INTERFACE_MODE_RMII, + MESON_USE_INTERNAL_RMII_PHY);
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, @@ -51,7 +51,7 @@ int misc_init_r(void)
int ft_board_setup(void *blob, bd_t *bd) { - meson_gx_init_reserved_memory(blob); + meson_init_reserved_memory(blob);
return 0; } diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c index ff56569..b59c11b 100644 --- a/board/amlogic/q200/q200.c +++ b/board/amlogic/q200/q200.c @@ -29,7 +29,7 @@ int misc_init_r(void) char serial[EFUSE_SN_SIZE]; ssize_t len;
- meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); + meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
/* Reset PHY on GPIOZ_14 */ clrbits_le32(GX_GPIO_EN(3), BIT(14)); @@ -56,7 +56,7 @@ int misc_init_r(void)
int ft_board_setup(void *blob, bd_t *bd) { - meson_gx_init_reserved_memory(blob); + meson_init_reserved_memory(blob);
return 0; } diff --git a/drivers/clk/clk_meson.c b/drivers/clk/clk_meson.c index 87e959e..978f646 100644 --- a/drivers/clk/clk_meson.c +++ b/drivers/clk/clk_meson.c @@ -6,7 +6,7 @@ */
#include <common.h> -#include <asm/arch/clock.h> +#include <asm/arch/clock-gx.h> #include <asm/io.h> #include <clk-uclass.h> #include <div64.h>