On 06:37-20231005, Jan Kiszka wrote:
From: Jan Kiszka jan.kiszka@siemens.com
Since commit [1] A53 u-boot proper is broken. This is because nodes marked as 'bootph-pre-ram' are not available at u-boot proper before relocation.
To fix this we mark all nodes in u-boot.dtsi as 'bootph-all'.
[1] 9e644284ab812 ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation")
Signed-off-by: Jan Kiszka jan.kiszka@siemens.com
Reviewed-by: Nishanth Menon nm@ti.com
.../dts/k3-am65-iot2050-common-u-boot.dtsi | 44 +++++++++---------- 1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi b/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi index 9fd64809a63..30fc7a78d89 100644 --- a/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi +++ b/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi @@ -37,18 +37,18 @@ };
leds {
bootph-pre-ram;
bootph-all;
bootph-pre-ram;
bootph-all;
bootph-pre-ram;
bootph-all;};
&cbass_mcu {
- bootph-pre-ram;
bootph-all;
mcu_navss: bus@28380000 { ringacc@2b800000 {
@@ -75,70 +75,70 @@ };
&cbass_wakeup {
- bootph-pre-ram;
- bootph-all;
};
&cbass_main {
- bootph-pre-ram;
- bootph-all; main_navss: bus@30800000 {
bootph-pre-ram;
bootph-all;};
&wkup_pmx0 {
- bootph-pre-ram;
- bootph-all; mcu-fss0-ospi0-pins-default {
bootph-pre-ram;
bootph-all;};
&main_pmx0 {
- bootph-pre-ram;
- bootph-all; main-uart1-pins-default {
bootph-pre-ram;
bootph-all;};
&main_uart1 {
- bootph-pre-ram;
- bootph-all; current-speed = <115200>;
};
&wkup_gpio0 {
- bootph-pre-ram;
- bootph-all;
};
&ospi0 {
- bootph-pre-ram;
- bootph-all; flash@0 {
bootph-pre-ram;
bootph-all;};
&secure_proxy_main {
- bootph-pre-ram;
- bootph-all;
};
&dmsc {
- bootph-pre-ram;
- bootph-all; k3_sysreset: sysreset-controller { compatible = "ti,sci-sysreset";
bootph-pre-ram;
bootph-all;};
&k3_pds {
- bootph-pre-ram;
- bootph-all;
};
&k3_clks {
- bootph-pre-ram;
- bootph-all;
};
&k3_reset {
- bootph-pre-ram;
- bootph-all;
};
&fss {
- bootph-pre-ram;
- bootph-all;
};
2.35.3