Enable USB keyboard to be used as input device at U-Boot prompt. Both serial and USB keyboard will be active inputs simultaneously.
Signed-off-by: Vignesh Raghavendra vigneshr@ti.com --- configs/am65x_evm_a53_defconfig | 3 +++ include/configs/am65x_evm.h | 1 + 2 files changed, 4 insertions(+)
diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig index d76c4b986f6d..312829be0d92 100644 --- a/configs/am65x_evm_a53_defconfig +++ b/configs/am65x_evm_a53_defconfig @@ -21,6 +21,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_SPL_LOAD_FIT=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern" +CONFIG_CONSOLE_MUX=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y @@ -70,6 +71,7 @@ CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_SYS_I2C_OMAP24XX=y +CONFIG_DM_KEYBOARD=y CONFIG_DM_MAILBOX=y CONFIG_K3_SEC_PROXY=y CONFIG_DM_MMC=y @@ -110,6 +112,7 @@ CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_KEYBOARD=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" CONFIG_USB_GADGET_VENDOR_NUM=0x0451 diff --git a/include/configs/am65x_evm.h b/include/configs/am65x_evm.h index 9a120cad89e3..7d7f86a0598a 100644 --- a/include/configs/am65x_evm.h +++ b/include/configs/am65x_evm.h @@ -72,6 +72,7 @@ "overlayaddr=0x83000000\0" \ "name_kern=Image\0" \ "console=ttyS2,115200n8\0" \ + "stdin=serial,usbkbd\0" \ "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \ "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0" \