Hi Tim,
On 25/10/2022 18:37, Tim Harvey wrote:
Fabio and Pali,
Seems reasonable but this does not resolve the problem. Whatever I print in board_init gets cutoff by the print from dm_announce.
You are right.
I managed to reproduce it:
--- a/board/warp7/warp7.c +++ b/board/warp7/warp7.c @@ -71,6 +71,7 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ printf("******************* 0123456789012345678901234567890123456789\n"); return 0; }
It does not print correctly:
U-Boot 2022.10-00796-gf9d16f2c0daf-dirty (Oct 25 2022 - 18:46:05 -0300)
CPU: Freescale i.MX7S rev1.2 800 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 49C Reset cause: POR Model: Element14 Warp i.MX7 Board Board: WARP7 in secure mode OPTEE DRAM 0x9d000000-0xa0000000 DRAM: 464 MiB �Core: 73 devices, 17 uclasses, devicetree: separate3456789 PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 3, FSL_SDHC: 0 Loading Environment from MMC... OK In: serial@30860000 Out: serial@30860000 Err: serial@30860000 SEC0: RNG instantiated Net: No ethernet found. Hit any key to stop autoboot: 0