Re: [PATCH 08/19] ARM: dts: stm32: Add alternate pinmux for MP13 PWM5 pins

On 4/22/24 01:16, Marek Vasut wrote:

Add another mux option for PWM5 pins, this is used on DH electronics STM32MP13xx DHCOR DHSBC board.

Signed-off-by: Marek Vasut marex@denx.de

Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com Cc: u-boot@dh-electronics.com Cc: uboot-stm32@st-md-mailman.stormreply.com

---

arch/arm/dts/stm32mp13-pinctrl.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)

diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi b/arch/arm/dts/stm32mp13-pinctrl.dtsi index b58bf6c0024..d19408f19f9 100644 --- a/arch/arm/dts/stm32mp13-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi @@ -245,6 +245,21 @@ }; };

• pwm5_pins_a: pwm5-0 {

• pins {
  

• 	pinmux = <STM32_PINMUX('H', 12, AF2)>; /* TIM5_CH3 */
  

• 	bias-pull-down;
  

• 	drive-push-pull;
  

• 	slew-rate = <0>;
  

• };
  

• };
• pwm5_sleep_pins_a: pwm5-sleep-0 {

• pins {
  

• 	pinmux = <STM32_PINMUX('H', 12, ANALOG)>; /* TIM5_CH3 */
  

• };
  

• };
• pwm8_pins_a: pwm8-0 { pins { pinmux = <STM32_PINMUX('E', 5, AF3)>; /* TIM8_CH3 */

Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com

Thanks Patrice