[PATCH 3/3] arm: dts: imx8mp: Sync with Linux 6.3

27 Apr 2023

From: Fabio Estevam festevam@denx.de
Sync imx8mp.dtsi and imx8mp-clock.h with Linux 6.3.
Signed-off-by: Fabio Estevam festevam@denx.de
---
 arch/arm/dts/imx8mp.dtsi                 | 374 ++++++++++++++++-------
 include/dt-bindings/clock/imx8mp-clock.h |  14 +-
 2 files changed, 270 insertions(+), 118 deletions(-)

diff --git a/arch/arm/dts/imx8mp.dtsi b/arch/arm/dts/imx8mp.dtsi
index bb916a0948a8..a237275ee017 100644
--- a/arch/arm/dts/imx8mp.dtsi
+++ b/arch/arm/dts/imx8mp.dtsi
@@ -123,6 +123,7 @@
A53_L2: l2-cache0 {
    		compatible = "cache";
+			cache-unified;
    		cache-level = <2>;
    		cache-size = <0x80000>;
    		cache-line-size = <64>;
@@ -379,6 +380,8 @@
    			compatible = "fsl,imx8mp-tmu";
    			reg = <0x30260000 0x10000>;
    			clocks = <&clk IMX8MP_CLK_TSENSOR_ROOT>;
+				nvmem-cells = <&tmu_calib>;
+				nvmem-cell-names = "calib";
    			#thermal-sensor-cells = <1>;
    		};
@@ -411,7 +414,7 @@
    			reg = <0x30330000 0x10000>;
    		};
-			gpr: iomuxc-gpr@30340000 {
+			gpr: syscon@30340000 {
    			compatible = "fsl,imx8mp-iomuxc-gpr", "syscon";
    			reg = <0x30340000 0x10000>;
    		};
@@ -424,27 +427,44 @@
    			#address-cells = <1>;
    			#size-cells = <1>;
-				imx8mp_uid: unique-id@420 {
+				/*
+				 * The register address below maps to the MX8M
+				 * Fusemap Description Table entries this way.
+				 * Assuming
+				 *   reg = <ADDR SIZE>;
+				 * then
+				 *   Fuse Address = (ADDR * 4) + 0x400
+				 * Note that if SIZE is greater than 4, then
+				 * each subsequent fuse is located at offset
+				 * +0x10 in Fusemap Description Table (e.g.
+				 * reg = <0x8 0x8> describes fuses 0x420 and
+				 * 0x430).
+				 */
+				imx8mp_uid: unique-id@8 { /* 0x420-0x430 */
    				reg = <0x8 0x8>;
    			};
-				cpu_speed_grade: speed-grade@10 {
+				cpu_speed_grade: speed-grade@10 { /* 0x440 */
    				reg = <0x10 4>;
    			};
-				eth_mac1: mac-address@90 {
+				eth_mac1: mac-address@90 { /* 0x640 */
    				reg = <0x90 6>;
    			};
-				eth_mac2: mac-address@96 {
+				eth_mac2: mac-address@96 { /* 0x658 */
    				reg = <0x96 6>;
    			};
+
+				tmu_calib: calib@264 { /* 0xd90-0xdc0 */
+					reg = <0x264 0x10>;
+				};
    		};
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop",
-					     "syscon";
+			anatop: clock-controller@30360000 {
+				compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop";
    			reg = <0x30360000 0x10000>;
+				#clock-cells = <1>;
    		};
snvs: snvs@30370000 {
@@ -523,6 +543,7 @@
    			compatible = "fsl,imx8mp-gpc";
    			reg = <0x303a0000 0x1000>;
    			interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
    			interrupt-controller;
    			#interrupt-cells = <3>;
@@ -589,7 +610,7 @@
    					reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
    				};
-					pgc_hsiomix: power-domains@17 {
+					pgc_hsiomix: power-domain@17 {
    					#power-domain-cells = <0>;
    					reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
    					clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
@@ -631,6 +652,14 @@
    					reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
    					clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
    				};
+
+					pgc_mlmix: power-domain@24 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MP_POWER_DOMAIN_MLMIX>;
+						clocks = <&clk IMX8MP_CLK_ML_AXI>,
+							 <&clk IMX8MP_CLK_ML_AHB>,
+							 <&clk IMX8MP_CLK_NPU_ROOT>;
+					};
    			};
    		};
    	};
@@ -702,112 +731,129 @@
    		#size-cells = <1>;
    		ranges;
-			ecspi1: spi@30820000 {
+			spba-bus@30800000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				reg = <0x30800000 0x100000>;
    			#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30820000 0x10000>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
-					 <&clk IMX8MP_CLK_ECSPI1_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				#size-cells = <1>;
+				ranges;
-			ecspi2: spi@30830000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30830000 0x10000>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
-					 <&clk IMX8MP_CLK_ECSPI2_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				ecspi1: spi@30820000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+					reg = <0x30820000 0x10000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
+						 <&clk IMX8MP_CLK_ECSPI1_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clock-rates = <80000000>;
+					assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
-			ecspi3: spi@30840000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx8mp-ecspi", "fsl,imx51-ecspi";
-				reg = <0x30840000 0x10000>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
-					 <&clk IMX8MP_CLK_ECSPI3_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				ecspi2: spi@30830000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+					reg = <0x30830000 0x10000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
+						 <&clk IMX8MP_CLK_ECSPI2_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clock-rates = <80000000>;
+					assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
-			uart1: serial@30860000 {
-				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
-				reg = <0x30860000 0x10000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
-					 <&clk IMX8MP_CLK_UART1_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				ecspi3: spi@30840000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
+					reg = <0x30840000 0x10000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
+						 <&clk IMX8MP_CLK_ECSPI3_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clock-rates = <80000000>;
+					assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
-			uart3: serial@30880000 {
-				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
-				reg = <0x30880000 0x10000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
-					 <&clk IMX8MP_CLK_UART3_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				uart1: serial@30860000 {
+					compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+					reg = <0x30860000 0x10000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
+						 <&clk IMX8MP_CLK_UART1_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
-			uart2: serial@30890000 {
-				compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
-				reg = <0x30890000 0x10000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
-					 <&clk IMX8MP_CLK_UART2_ROOT>;
-				clock-names = "ipg", "per";
-				dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
+				uart3: serial@30880000 {
+					compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+					reg = <0x30880000 0x10000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
+						 <&clk IMX8MP_CLK_UART3_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
-			flexcan1: can@308c0000 {
-				compatible = "fsl,imx8mp-flexcan";
-				reg = <0x308c0000 0x10000>;
-				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
-					 <&clk IMX8MP_CLK_CAN1_ROOT>;
-				clock-names = "ipg", "per";
-				assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
-				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
-				assigned-clock-rates = <40000000>;
-				fsl,clk-source = /bits/ 8 <0>;
-				fsl,stop-mode = <&gpr 0x10 4>;
-				status = "disabled";
-			};
+				uart2: serial@30890000 {
+					compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
+					reg = <0x30890000 0x10000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
+						 <&clk IMX8MP_CLK_UART2_ROOT>;
+					clock-names = "ipg", "per";
+					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
-			flexcan2: can@308d0000 {
-				compatible = "fsl,imx8mp-flexcan";
-				reg = <0x308d0000 0x10000>;
-				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
-					 <&clk IMX8MP_CLK_CAN2_ROOT>;
-				clock-names = "ipg", "per";
-				assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
-				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
-				assigned-clock-rates = <40000000>;
-				fsl,clk-source = /bits/ 8 <0>;
-				fsl,stop-mode = <&gpr 0x10 5>;
-				status = "disabled";
+				flexcan1: can@308c0000 {
+					compatible = "fsl,imx8mp-flexcan";
+					reg = <0x308c0000 0x10000>;
+					interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+						 <&clk IMX8MP_CLK_CAN1_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+					assigned-clock-rates = <40000000>;
+					fsl,clk-source = /bits/ 8 <0>;
+					fsl,stop-mode = <&gpr 0x10 4>;
+					status = "disabled";
+				};
+
+				flexcan2: can@308d0000 {
+					compatible = "fsl,imx8mp-flexcan";
+					reg = <0x308d0000 0x10000>;
+					interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
+						 <&clk IMX8MP_CLK_CAN2_ROOT>;
+					clock-names = "ipg", "per";
+					assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
+					assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
+					assigned-clock-rates = <40000000>;
+					fsl,clk-source = /bits/ 8 <0>;
+					fsl,stop-mode = <&gpr 0x10 5>;
+					status = "disabled";
+				};
    		};
crypto: crypto@30900000 {
@@ -1063,11 +1109,11 @@
    		noc_opp_table: opp-table {
    			compatible = "operating-points-v2";
-				opp-200M {
+				opp-200000000 {
    				opp-hz = /bits/ 64 <200000000>;
    			};
-				opp-1000M {
+				opp-1000000000 {
    				opp-hz = /bits/ 64 <1000000000>;
    			};
    		};
@@ -1080,10 +1126,35 @@
    		#size-cells = <1>;
    		ranges;
+			lcdif2: display-controller@32e90000 {
+				compatible = "fsl,imx8mp-lcdif";
+				reg = <0x32e90000 0x10000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>;
+				clock-names = "pix", "axi", "disp_axi";
+				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
+						  <&clk IMX8MP_VIDEO_PLL1>;
+				assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>,
+							 <&clk IMX8MP_VIDEO_PLL1_REF_SEL>;
+				assigned-clock-rates = <0>, <1039500000>;
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_2>;
+				status = "disabled";
+
+				port {
+					lcdif2_to_ldb: endpoint {
+						remote-endpoint = <&ldb_from_lcdif2>;
+					};
+				};
+			};
+
    		media_blk_ctrl: blk-ctrl@32ec0000 {
    			compatible = "fsl,imx8mp-media-blk-ctrl",
-					     "syscon";
+					     "simple-bus", "syscon";
    			reg = <0x32ec0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
    			power-domains = <&pgc_mediamix>,
    					<&pgc_mipi_phy1>,
    					<&pgc_mipi_phy1>,
@@ -1128,6 +1199,44 @@
    			assigned-clock-rates = <500000000>, <200000000>;
#power-domain-cells = <1>;
+
+				lvds_bridge: bridge@5c {
+					compatible = "fsl,imx8mp-ldb";
+					clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+					clock-names = "ldb";
+					reg = <0x5c 0x4>, <0x128 0x4>;
+					reg-names = "ldb", "lvds";
+					assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+					assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>;
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							ldb_from_lcdif2: endpoint {
+								remote-endpoint = <&lcdif2_to_ldb>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							ldb_lvds_ch0: endpoint {
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							ldb_lvds_ch1: endpoint {
+							};
+						};
+					};
+				};
    		};
pcie_phy: pcie-phy@32f00000 {
@@ -1158,6 +1267,7 @@
    					<&noc IMX8MP_ICM_PCIE &noc IMX8MP_ICN_HSIO>;
    			interconnect-names = "noc-pcie", "usb1", "usb2", "pcie";
    			#power-domain-cells = <1>;
+				#clock-cells = <0>;
    		};
    	};
@@ -1165,6 +1275,13 @@
    		compatible = "fsl,imx8mp-pcie";
    		reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
    		reg-names = "dbi", "config";
+			clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+				 <&clk IMX8MP_CLK_HSIO_AXI>,
+				 <&clk IMX8MP_CLK_PCIE_ROOT>;
+			clock-names = "pcie", "pcie_bus", "pcie_aux";
+			assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+			assigned-clock-rates = <10000000>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
    		#address-cells = <3>;
    		#size-cells = <2>;
    		device_type = "pci";
@@ -1223,6 +1340,28 @@
    		power-domains = <&pgc_gpu2d>;
    	};
+		vpu_g1: video-codec@38300000 {
+			compatible = "nxp,imx8mm-vpu-g1";
+			reg = <0x38300000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
+			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-rates = <600000000>;
+			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>;
+		};
+
+		vpu_g2: video-codec@38310000 {
+			compatible = "nxp,imx8mq-vpu-g2";
+			reg = <0x38310000 0x10000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
+			assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+			assigned-clock-rates = <500000000>;
+			power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>;
+		};
+
    	vpumix_blk_ctrl: blk-ctrl@38330000 {
    		compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon";
    		reg = <0x38330000 0x100>;
@@ -1234,6 +1373,9 @@
    			 <&clk IMX8MP_CLK_VPU_G2_ROOT>,
    			 <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
    		clock-names = "g1", "g2", "vc8000e";
+			assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>;
+			assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+			assigned-clock-rates = <600000000>, <600000000>;
    		interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>,
    				<&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>,
    				<&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
@@ -1279,7 +1421,7 @@
    		reg = <0x32f10100 0x8>,
    		      <0x381f0000 0x20>;
    		clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
-				 <&clk IMX8MP_CLK_USB_ROOT>;
+				 <&clk IMX8MP_CLK_USB_SUSP>;
    		clock-names = "hsio", "suspend";
    		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
    		power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
@@ -1292,9 +1434,9 @@
    		usb_dwc3_0: usb@38100000 {
    			compatible = "snps,dwc3";
    			reg = <0x38100000 0x10000>;
-				clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
    				 <&clk IMX8MP_CLK_USB_CORE_REF>,
-					 <&clk IMX8MP_CLK_USB_ROOT>;
+					 <&clk IMX8MP_CLK_USB_SUSP>;
    			clock-names = "bus_early", "ref", "suspend";
    			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
    			phys = <&usb3_phy0>, <&usb3_phy0>;
@@ -1321,7 +1463,7 @@
    		reg = <0x32f10108 0x8>,
    		      <0x382f0000 0x20>;
    		clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
-				 <&clk IMX8MP_CLK_USB_ROOT>;
+				 <&clk IMX8MP_CLK_USB_SUSP>;
    		clock-names = "hsio", "suspend";
    		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
    		power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
@@ -1334,9 +1476,9 @@
    		usb_dwc3_1: usb@38200000 {
    			compatible = "snps,dwc3";
    			reg = <0x38200000 0x10000>;
-				clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+				clocks = <&clk IMX8MP_CLK_USB_ROOT>,
    				 <&clk IMX8MP_CLK_USB_CORE_REF>,
-					 <&clk IMX8MP_CLK_USB_ROOT>;
+					 <&clk IMX8MP_CLK_USB_SUSP>;
    			clock-names = "bus_early", "ref", "suspend";
    			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
    			phys = <&usb3_phy1>, <&usb3_phy1>;
diff --git a/include/dt-bindings/clock/imx8mp-clock.h b/include/dt-bindings/clock/imx8mp-clock.h
index 9d5cc2ddde89..3f28ce685f41 100644
--- a/include/dt-bindings/clock/imx8mp-clock.h
+++ b/include/dt-bindings/clock/imx8mp-clock.h
@@ -324,8 +324,18 @@
 #define IMX8MP_CLK_CLKOUT2_SEL			317
 #define IMX8MP_CLK_CLKOUT2_DIV			318
 #define IMX8MP_CLK_CLKOUT2			319
-
-#define IMX8MP_CLK_END				320
+#define IMX8MP_CLK_USB_SUSP			320
+#define IMX8MP_CLK_AUDIO_AHB_ROOT		IMX8MP_CLK_AUDIO_ROOT
+#define IMX8MP_CLK_AUDIO_AXI_ROOT		321
+#define IMX8MP_CLK_SAI1_ROOT			322
+#define IMX8MP_CLK_SAI2_ROOT			323
+#define IMX8MP_CLK_SAI3_ROOT			324
+#define IMX8MP_CLK_SAI5_ROOT			325
+#define IMX8MP_CLK_SAI6_ROOT			326
+#define IMX8MP_CLK_SAI7_ROOT			327
+#define IMX8MP_CLK_PDM_ROOT			328
+#define IMX8MP_CLK_MEDIA_LDB_ROOT		329
+#define IMX8MP_CLK_END				330
#define IMX8MP_CLK_AUDIOMIX_SAI1_IPG		0
 #define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1		1
-- 
2.34.1


    