Move the device-specific code out into the top-level function.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
drivers/usb/emul/sandbox_flash.c | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/emul/sandbox_flash.c b/drivers/usb/emul/sandbox_flash.c index e699f89793d..7b9a99c1a38 100644 --- a/drivers/usb/emul/sandbox_flash.c +++ b/drivers/usb/emul/sandbox_flash.c @@ -206,8 +206,19 @@ static void setup_response(struct sandbox_flash_priv *priv) csw->bCSWStatus = CSWSTATUS_GOOD; }
-static void handle_read(struct sandbox_flash_priv *priv, ulong lba, - ulong transfer_len) +/** + * handle_read() - prepare for reading data from the backing file + * + * This seeks to the correct file position and sets info->buff_used to the + * correct size. + * + * @priv: Private information + * @lba: Start block to read from + * @transfer_length: Number of blocks to read + * @return 0 if OK, -EIO on failure + */ +static int handle_read(struct sandbox_flash_priv *priv, ulong lba, + ulong transfer_len) { struct scsi_emul_info *info = &priv->eminfo;
@@ -216,10 +227,10 @@ static void handle_read(struct sandbox_flash_priv *priv, ulong lba, if (priv->fd != -1) { os_lseek(priv->fd, lba * info->block_size, OS_SEEK_SET); info->buff_used = transfer_len * info->block_size; - setup_response(priv); - } else { - setup_fail_response(priv); + return 0; } + + return -EIO; }
static int handle_ufi_command(struct sandbox_flash_plat *plat, @@ -265,8 +276,12 @@ static int handle_ufi_command(struct sandbox_flash_plat *plat, case SCSI_READ10: { struct scsi_read10_req *req = (void *)buff;
- handle_read(priv, be32_to_cpu(req->lba), - be16_to_cpu(req->xfer_len)); + if (!handle_read(priv, be32_to_cpu(req->lba), + be16_to_cpu(req->xfer_len))) + setup_response(priv); + else + setup_fail_response(priv); + break; } default: