This patch adds FDT support to the codec.
Signed-off-by: Rajeshwari Shinde rajeshwari.s@samsung.com Acked-by: Simon Glass sjg@chromium.org --- Changes in V1: -Rebased on latest u-boot-samsung drivers/sound/wm8994.c | 76 ++++++++++++++++++++++++++++++++++++++++++++++- drivers/sound/wm8994.h | 6 +-- 2 files changed, 76 insertions(+), 6 deletions(-)
diff --git a/drivers/sound/wm8994.c b/drivers/sound/wm8994.c index 293903a..a528502 100644 --- a/drivers/sound/wm8994.c +++ b/drivers/sound/wm8994.c @@ -26,9 +26,11 @@ #include <asm/io.h> #include <common.h> #include <div64.h> +#include <fdtdec.h> #include <i2c.h> #include <i2s.h> #include <sound.h> +#include <asm/arch/sound.h> #include "wm8994.h" #include "wm8994_registers.h"
@@ -77,6 +79,7 @@ static int bclk_divs[] = {
static struct wm8994_priv g_wm8994_info; static unsigned char g_wm8994_i2c_dev_addr; +static struct sound_codec_info g_codec_info;
/* * Initialise I2C for wm 8994 @@ -747,13 +750,82 @@ err: return -1; }
+/* + * Gets fdt values for wm8994 config parameters + * + * @param pcodec_info codec information structure + * @param blob FDT blob + * @return int value, 0 for success + */ +static int get_codec_values(struct sound_codec_info *pcodec_info, + const void *blob) +{ + int error = 0; +#ifdef CONFIG_OF_CONTROL + enum fdt_compat_id compat; + int node; + int parent; + + /* Get the node from FDT for codec */ + node = fdtdec_next_compatible(blob, 0, COMPAT_WOLFSON_WM8994_CODEC); + if (node <= 0) { + debug("EXYNOS_SOUND: No node for codec in device tree\n"); + debug("node = %d\n", node); + return -1; + } + + parent = fdt_parent_offset(blob, node); + if (parent < 0) { + debug("%s: Cannot find node parent\n", __func__); + return -1; + } + + compat = fdtdec_lookup(blob, parent); + switch (compat) { + case COMPAT_SAMSUNG_S3C2440_I2C: + pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent); + error |= pcodec_info->i2c_bus; + debug("i2c bus = %d\n", pcodec_info->i2c_bus); + pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node, + "reg", 0); + error |= pcodec_info->i2c_dev_addr; + debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr); + break; + default: + debug("%s: Unknown compat id %d\n", __func__, compat); + return -1; + } +#else + pcodec_info->i2c_bus = AUDIO_I2C_BUS; + pcodec_info->i2c_dev_addr = AUDIO_I2C_REG; + debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr); +#endif + + pcodec_info->codec_type = CODEC_WM_8994; + + if (error == -1) { + debug("fail to get wm8994 codec node properties\n"); + return -1; + } + + return 0; + +} + + /*wm8994 Device Initialisation */ -int wm8994_init(struct sound_codec_info *pcodec_info, - enum en_audio_interface aif_id, +int wm8994_init(const void *blob, enum en_audio_interface aif_id, int sampling_rate, int mclk_freq, int bits_per_sample, unsigned int channels) { int ret = 0; + struct sound_codec_info *pcodec_info = &g_codec_info; + + /* Get the codec Values */ + if (get_codec_values(pcodec_info, blob) < 0) { + debug("FDT Codec values failed\n"); + return -1; + }
/* shift the device address by 1 for 7 bit addressing */ g_wm8994_i2c_dev_addr = pcodec_info->i2c_dev_addr; diff --git a/drivers/sound/wm8994.h b/drivers/sound/wm8994.h index a8f0de1..a1e8335 100644 --- a/drivers/sound/wm8994.h +++ b/drivers/sound/wm8994.h @@ -69,8 +69,7 @@ enum wm8994_type { /* * intialise wm8994 sound codec device for the given configuration * - * @param pcodec_info pointer value of the sound codec info structure - * parsed from device tree + * @param blob FDT node for codec values * @param aif_id enum value of codec interface port in which * soc i2s is connected * @param sampling_rate Sampling rate ranges between from 8khz to 96khz @@ -80,8 +79,7 @@ enum wm8994_type { * * @returns -1 for error and 0 Success. */ -int wm8994_init(struct sound_codec_info *pcodec_info, - enum en_audio_interface aif_id, +int wm8994_init(const void *blob, enum en_audio_interface aif_id, int sampling_rate, int mclk_freq, int bits_per_sample, unsigned int channels); #endif /*__WM8994_H__ */