Hi Marek,
On 11/13/21 3:27 AM, Marek Vasut wrote:
The ethernet PHY must be reset on AV96, however DWMAC currently does not support the MDIO-bus PHY GPIO reset bindings and the ethernet MAC PHY reset property is going away on next DT sync. Add PHY specific reset bindings to trigger the PHY reset and fix sporadic ethernet malfunctions, until the next DT sync.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi index 8b275e4950e..4b1dbf08387 100644 --- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi @@ -19,6 +19,17 @@ }; };
+ðernet0 {
- mdio0 {
ethernet-phy@7 {reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;reset-assert-us = <11000>;reset-deassert-us = <1000>;};- };
+};
- &sdmmc1 { u-boot,dm-spl; };
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick