Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000.
Signed-off-by: Priyanka Jain priyanka.jain@nxp.com --- changes for v2: updated MC fw, dpc address
include/configs/ls1088aqds.h | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index d032a3d111..78ccc2dc5b 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -386,7 +386,7 @@ unsigned long get_board_ddr_clk(void); "kernel_start=0x1000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ - "mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x100000;" \ + "mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x200000;" \ "sf read 0xa0640000 0x640000 0x4000; esbc_validate 0xa0640000;" \ "sf read 0xa0e00000 0xe00000 0x100000;" \ "sf read 0xa0680000 0x680000 0x4000;esbc_validate 0xa0680000;" \ @@ -395,13 +395,13 @@ unsigned long get_board_ddr_clk(void); #else /* if !(CONFIG_NXP_ESBC) */ #ifdef CONFIG_TFABOOT #define QSPI_MC_INIT_CMD \ - "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ - "sf read 0x80100000 0xE00000 0x100000;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" + "sf probe 0:0;sf read 0x80a00000 0xA00000 0x200000;" \ + "sf read 0x80e00000 0xE00000 0x100000;" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" #define SD_MC_INIT_CMD \ - "mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ - "mmc read 0x80100000 0x7000 0x800;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" + "mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ + "mmc read 0x80e00000 0x7000 0x800;" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" #define IFC_MC_INIT_CMD \ "fsl_mc start mc 0x580A00000 0x580E00000\0"
@@ -421,9 +421,9 @@ unsigned long get_board_ddr_clk(void); "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "kernel_size_sd=0x14000\0" \ - "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ - "sf read 0x80100000 0xE00000 0x100000;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" \ + "mcinitcmd=sf probe 0:0;sf read 0x80a00000 0xA00000 0x200000;" \ + "sf read 0x80e00000 0xE00000 0x100000;" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000 \0" \ "BOARD=ls1088aqds\0" \ "scriptaddr=0x80000000\0" \ @@ -480,9 +480,9 @@ unsigned long get_board_ddr_clk(void); "kernel_start=0x1000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ - "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ - "sf read 0x80100000 0xE00000 0x100000;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" \ + "mcinitcmd=sf probe 0:0;sf read 0x80a00000 0xA00000 0x200000;" \ + "sf read 0x80e00000 0xE00000 0x100000;" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000 \0" #elif defined(CONFIG_SD_BOOT) #undef CONFIG_EXTRA_ENV_SETTINGS @@ -498,9 +498,9 @@ unsigned long get_board_ddr_clk(void); "kernel_start=0x8000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x14000\0" \ - "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ - "mmc read 0x80100000 0x7000 0x800;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" \ + "mcinitcmd=mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ + "mmc read 0x80e00000 0x7000 0x800;" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000 \0" #else /* NOR BOOT */ #undef CONFIG_EXTRA_ENV_SETTINGS