Hello,
This series is to:
Add support for Inline ECC in DDR for AM64X, AM62X, AM62AX, AM62PX, J721S2 and J784S4 devices.
(1/8) Enable ECC priming with BIST engine (2/8) Add a function to store base address and size of RAM's banks in a 64-bit device private data (3/8) Setup the ECC region start and range (4/8) Enable ECC 1-bit error, 2-bit error and multiple-bit error interrupts (5/8) Add CONFIG_K3_INLINE_ECC (6/8) Set NR_DRAM_BANKS to 2 (7/8) Pull Redundant DDR functions to a common location and Fixup DDR size when ECC is enabled (8/8) Add ss_cfg reg entry
Changes since v2: Removed 'default n' in Kconfig as that is default setting
v2: https://lore.kernel.org/u-boot/20240510084707.1903133-1-s-k6@ti.com/
Changes since v1: Add support for J7* devices.
v1: https://lore.kernel.org/u-boot/20240131060213.1128024-1-s-k6@ti.com/
Test Results: https://gist.github.com/santhosh21/53c6f285640c4b6dfb3420d84975d12a
This series contains changes that grab the memory node from the DTS to set/modify DRAM bank sizes. A kernel patch has been sent [1] setting the required nodes to be available at bootloader stage. This patch series can be merged only after the DTS changes have been reflected in U-Boot either via OF_UPSTREAM (for devices that have moved to it) or via a sync to U-Boot patch.
[1] https://lore.kernel.org/all/20240506110203.3230255-1-n-francis@ti.com/
Thanks and Regards, Santhosh.
Georgi Vlaev (1): ram: k3-ddrss: Use the DDR controller BIST engine for ECC priming
Neha Malcom Francis (2): drivers: ram: Kconfig: Add CONFIG_K3_INLINE_ECC configs: j7*_evm_r5_defconfig: Set NR_DRAM_BANKS to 2
Santhosh Kumar K (5): ram: k3-ddrss: Add k3_ddrss_ddr_bank_base_size_calc() to solve 'calculations restricted to 32 bits' issue ram: k3-ddrss: Setup ECC region start and range ram: k3-ddrss: Enable ECC interrupts board: ti: Pull redundant DDR functions to a common location and Fixup DDR size when ECC is enabled arm: dts: k3-*-ddr: Add ss_cfg reg entry
arch/arm/dts/k3-am62a-ddr.dtsi | 7 +- arch/arm/dts/k3-j721s2-ddr.dtsi | 12 +- arch/arm/dts/k3-j784s4-ddr.dtsi | 24 ++-- board/ti/am62ax/evm.c | 17 +-- board/ti/am62px/evm.c | 18 +-- board/ti/am62x/evm.c | 63 ++-------- board/ti/am64x/evm.c | 73 ++--------- board/ti/am65x/evm.c | 29 +---- board/ti/common/Makefile | 1 + board/ti/common/k3-ddr-init.c | 89 +++++++++++++ board/ti/common/k3-ddr-init.h | 15 +++ board/ti/j721e/evm.c | 29 +---- board/ti/j721s2/evm.c | 35 ++---- board/ti/j784s4/evm.c | 17 +-- configs/j7200_evm_r5_defconfig | 1 + configs/j721e_evm_r5_defconfig | 1 + configs/j721s2_evm_r5_defconfig | 1 + configs/j784s4_evm_r5_defconfig | 1 + drivers/ram/Kconfig | 10 ++ drivers/ram/k3-ddrss/k3-ddrss.c | 214 +++++++++++++++++++++++++++----- 20 files changed, 390 insertions(+), 267 deletions(-) create mode 100644 board/ti/common/k3-ddr-init.c create mode 100644 board/ti/common/k3-ddr-init.h