po 21. 6. 2021 v 9:43 odesÃlatel Michal Simek michal.simek@xilinx.com napsal:
From: Piyush Mehta piyush.mehta@xilinx.com
This patch adds psgtr clocks and phy entry for USB0, USB1 and SATA node for zc1751-xm017-dc3 board.
Signed-off-by: Piyush Mehta piyush.mehta@xilinx.com Signed-off-by: Michal Simek michal.simek@xilinx.com
arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts | 26 ++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts index a9bac1dec03e..344323ab7f93 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts @@ -11,6 +11,7 @@
#include "zynqmp.dtsi" #include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/phy/phy.h>
/ { model = "ZynqMP zc1751-xm017-dc3 RevA"; @@ -37,6 +38,18 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; };
clock_si5338_2: clk26 {compatible = "fixed-clock";#clock-cells = <0>;clock-frequency = <26000000>;};clock_si5338_3: clk125 {compatible = "fixed-clock";#clock-cells = <0>;clock-frequency = <125000000>;};};
&fpd_dma_chan1 { @@ -166,6 +179,13 @@ }; };
+&psgtr {
status = "okay";/* usb3, sata */clocks = <&clock_si5338_2>, <&clock_si5338_3>;clock-names = "ref2", "ref3";+};
&rtc { status = "okay"; }; @@ -181,6 +201,8 @@ ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
phy-names = "sata-phy";phys = <&psgtr 2 PHY_TYPE_SATA 0 3>;};
&sdhci1 { /* emmc with some settings */ @@ -205,6 +227,8 @@ status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable;
phy-names = "usb3-phy";phys = <&psgtr 0 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed";};
@@ -217,5 +241,7 @@ status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable;
phy-names = "usb3-phy";phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; maximum-speed = "super-speed";};
2.32.0
Applied. M