On Wed, 27 Nov 2024 13:04:19 +0000 "Marcin Ślusarz" marcin.slusarz@gmail.com wrote:
Hi Marcin,
thanks for taking care of sending a mainline patch!
Allows decreasing initial charge current, e.g. when power supply is too weak to support both charging and other operations.
Can you explain a bit more why and where you actually need that?
The problem I have with the code is that it's doing it in the SPL, where I actually want to decrease any PMIC usage. We really only need the PMIC that early to set the DRAM and CPU core voltage, everything else should be done in either U-Boot proper or the kernel.
So how did this work before, and why it is a problem now? AXP221 points to some older SoC, I guess? Is it that you find yourself with a somewhat weak power supply, and if the battery is discharged, there won't be enough power left for the system to boot reliably?
Do you know of any existing DT property for instance that could limit the charge current? Or is there a sysfs property only?
Cheers, Andre
Signed-off-by: Marcin Ślusarz mslusarz@renau.com Cc: Jagan Teki jagan@amarulasolutions.com Cc: Andre Przywara andre.przywara@arm.com
board/sunxi/board.c | 4 ++++ drivers/power/Kconfig | 7 +++++++ drivers/power/axp221.c | 33 +++++++++++++++++++++++++++++++++ include/axp221.h | 3 +++ include/axp_pmic.h | 1 + 5 files changed, 48 insertions(+)
diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 824c322a0d..07fccf972a 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -623,6 +623,10 @@ void sunxi_board_init(void) #if defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER power_failed |= axp_set_sw(IS_ENABLED(CONFIG_AXP_SW_ON)); #endif
+#ifdef CONFIG_AXP221_POWER
- power_failed |= axp221_set_charge_current(CONFIG_AXP221_CHARGE_CURRENT);
+#endif #endif /* CONFIG_AXPxxx_POWER */ printf("DRAM:"); gd->ram_size = sunxi_dram_init(); diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 4b81aeb749..06b509a383 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -142,6 +142,13 @@ config SY8106A_POWER
endchoice
+config AXP221_CHARGE_CURRENT
- int "axp221 constant charge current in mA"
- depends on AXP221_POWER
- default 1200
- ---help---
- Any value between 300 and 2100 in 150 increments, or 0 to disable charging.
config AXP_DCDC1_VOLT int "axp pmic dcdc1 voltage" depends on AXP221_POWER || AXP809_POWER || AXP818_POWER diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c index c22ca03f46..bf48585da0 100644 --- a/drivers/power/axp221.c +++ b/drivers/power/axp221.c @@ -205,6 +205,39 @@ int axp_set_eldo(int eldo_num, unsigned int mvolt) AXP221_OUTPUT_CTRL2_ELDO1_EN << (eldo_num - 1)); }
+static u8 axp221_mamp_to_cfg(int mamp, int min, int max, int div) +{
- if (mamp < min)
mamp = min;- else if (mamp > max)
mamp = max;- return (mamp - min) / div;
+}
+int axp221_set_charge_current(unsigned int mamp) +{
- int ret;
- u8 cfg, chrg_ctrl;
- cfg = axp221_mamp_to_cfg(mamp, 300, 2100, 150);
- if (cfg > 0x0f)
return -EINVAL;- ret = pmic_bus_read(AXP221_CHRG_CTRL1, &chrg_ctrl);
- if (ret)
return ret;- chrg_ctrl = (chrg_ctrl & 0xf0) | cfg;
- if (mamp == 0)
chrg_ctrl &= 0x7f;- else
chrg_ctrl |= 0x80;- return pmic_bus_write(AXP221_CHRG_CTRL1, chrg_ctrl);
+}
int axp_init(void) { u8 axp_chip_id; diff --git a/include/axp221.h b/include/axp221.h index 32b988f3a9..8eb1792435 100644 --- a/include/axp221.h +++ b/include/axp221.h @@ -44,6 +44,9 @@ #define AXP221_ALDO3_CTRL 0x2a #define AXP221_SHUTDOWN 0x32 #define AXP221_SHUTDOWN_POWEROFF (1 << 7) +#define AXP221_CHRG_CTRL1 0x33 +#define AXP221_CHRG_CTRL2 0x34 +#define AXP221_CHRG_CTRL3 0x35 #define AXP221_PAGE 0xff
/* Page 1 addresses */ diff --git a/include/axp_pmic.h b/include/axp_pmic.h index ae62ef0d76..3bcd8f9ca9 100644 --- a/include/axp_pmic.h +++ b/include/axp_pmic.h @@ -52,6 +52,7 @@ int axp_set_aldo4(unsigned int mvolt); int axp_set_dldo(int dldo_num, unsigned int mvolt); int axp_set_eldo(int eldo_num, unsigned int mvolt); int axp_set_fldo(int fldo_num, unsigned int mvolt); +int axp221_set_charge_current(unsigned int mamp); int axp_set_sw(bool on); int axp_init(void); int axp_get_sid(unsigned int *sid);