Dear Michal Simek,
In message 1292955178-13018-3-git-send-email-monstr@monstr.eu you wrote:
Patch "Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value" (sha1: 25ddd1fb0a2281b182529afbc8fda5de2dc16d96) introduce GENERATED_GBL_DATA_SIZE which is sizeof aligned gd_t (currently 0x40). Microblaze configs used 0x40(128) because this place also contained board info structure which lies on the top of ram.
In the Subject: s/bdiinfo/bd_info/
index eeef579..8232cf0 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -91,15 +91,16 @@ void board_init (void) bd_t *bd; init_fnc_t **init_fnc_ptr; gd = (gd_t *) CONFIG_SYS_GBL_DATA_OFFSET;
- bd = (bd_t *) CONFIG_SYS_GBL_DATA_OFFSET - GENERATED_BD_INFO_SIZE;
This is actually wrong.
You are using CONFIG_SYS_GBL_DATA_OFFSET as if it were CONFIG_SYS_GBL_DATA_ADDR, but it ain't so: it is an _offset_, and NOT and address.
- memset ((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
- gd->bd = (bd_t *) (gd + 1); /* At end of global data */
- memset ((void *)bd, 0, GENERATED_GBL_DATA_SIZE
+ GENERATED_BD_INFO_SIZE);
Don't do this. Instead, use two separate memset() calls, one for gd and another one for bd. The stucts may be in a contiguous area now, but you would probably run into nasty bugs if this gets changed one day.
Best regards,
Wolfgang Denk