Re: [U-Boot] [PATCH 1/2] Kconfig: Add entry for VF610 NAND NFC device tree aware driver

On 03.12.2018 10:24, Lukasz Majewski wrote:

This commit provides code to add proper entry to Kconfig to enable support for VF610 device tree aware driver.

Looks like a start, but ideally we should also move all the board/system specific properties to device-tree (e.g. CONFIG_SYS_NAND_VF610_NFC_45_ECC_BYTES).

-- Stefan

Signed-off-by: Lukasz Majewski lukma@denx.de

---

drivers/mtd/nand/raw/Kconfig | 11 +++++++++++ 1 file changed, 11 insertions(+)

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 008f7b4b4b..fd1723feda 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -88,6 +88,15 @@ config NAND_VF610_NFC The driver supports a maximum 2k page size. The driver currently does not support hardware ECC.

+if NAND_VF610_NFC

+config NAND_VF610_NFC_DT

•    bool "Support Vybrid's vf610 NAND controller as a DT device"
  

•    depends on OF_CONTROL && MTD
  

•    help
  

•      Enable the driver for Vybrid's vf610 NAND flash on platforms
  

•  using device tree.
  

choice prompt "Hardware ECC strength" depends on NAND_VF610_NFC @@ -103,6 +112,8 @@ config SYS_NAND_VF610_NFC_60_ECC_BYTES

endchoice

+endif

config NAND_PXA3XX bool "Support for NAND on PXA3xx and Armada 370/XP/38x" select SYS_NAND_SELF_INIT