Add the ability to read the phy-handle node of the cpsw slave. Upon reading this handle the phy-id can be stored based on the reg node in the DT.
The phy-handle also needs to be stored and passed to the phy to access any phy data that is available.
Signed-off-by: Dan Murphy dmurphy@ti.com ---
v6 - Fix build error when DM_ETH is not defined and updated phy_handle error handling - https://patchwork.ozlabs.org/patch/608763/
drivers/net/cpsw.c | 20 ++++++++++++++++++-- include/cpsw.h | 1 + 2 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c index 7104754..3d6f0ce 100644 --- a/drivers/net/cpsw.c +++ b/drivers/net/cpsw.c @@ -965,6 +965,11 @@ static int cpsw_phy_init(struct cpsw_priv *priv, struct cpsw_slave *slave) phydev->supported &= supported; phydev->advertising = phydev->supported;
+#ifdef CONFIG_DM_ETH + if (slave->data->phy_of_handle) + phydev->dev->of_offset = slave->data->phy_of_handle; +#endif + priv->phydev = phydev; phy_config(phydev);
@@ -1217,8 +1222,19 @@ static int cpsw_eth_ofdata_to_platdata(struct udevice *dev) if (phy_mode) priv->data.slave_data[slave_index].phy_if = phy_get_interface_by_name(phy_mode); - fdtdec_get_int_array(fdt, subnode, "phy_id", phy_id, 2); - priv->data.slave_data[slave_index].phy_addr = phy_id[1]; + + priv->data.slave_data[slave_index].phy_of_handle = + fdtdec_lookup_phandle(fdt, subnode, "phy-handle"); + + if (priv->data.slave_data[slave_index].phy_of_handle >= 0) { + priv->data.slave_data[slave_index].phy_addr = + fdtdec_get_int(gd->fdt_blob, + priv->data.slave_data[slave_index].phy_of_handle, + "reg", -1); + } else { + fdtdec_get_int_array(fdt, subnode, "phy_id", phy_id, 2); + priv->data.slave_data[slave_index].phy_addr = phy_id[1]; + } slave_index++; }
diff --git a/include/cpsw.h b/include/cpsw.h index cf1d30b..ff95cd8 100644 --- a/include/cpsw.h +++ b/include/cpsw.h @@ -21,6 +21,7 @@ struct cpsw_slave_data { u32 sliver_reg_ofs; int phy_addr; int phy_if; + int phy_of_handle; };
enum {