On Mon, Aug 03, 2009 at 08:20:41PM +0530, Rupesh Kumar wrote:
Hi, I used latest version of u-boot (U-Boot 2009.08-rc1) for NAND booting of my board. Still, it didn't work. Board starts booting and then says read failed and hangs there. It prints following message on console
"NAND boot... read failed (ltesr)"
You most likely got an uncorrectable ECC error reading the data; did you also program the image from current u-boot, or are you trying to boot an image written by the old u-boot? There could be a mismatch on ECC layout.
Is your board file overriding FMR with CONFIG_FSL_ELBC_FMR (it should not)?
I am using 2.1 silicon MPC8313 based custom board with large page NAND.
Can any one tell how shall i proceed for booting successfully from large page NAND ?
Debugging. :-)
-Scott