Hi,
On 08-11-16 17:21, Maxime Ripard wrote:
The SPL image needs to be built with a different ECC configuration than the U-Boot binary.
Add Kconfig options with defaults to provide a value that should work for anyone, but is still configurable if needs be.
Signed-off-by: Maxime Ripard maxime.ripard@free-electrons.com
Looks good to me:
Reviewed-by: Hans de Goede hdegoede@redhat.com
Regards,
Hans
drivers/mtd/nand/Kconfig | 16 ++++++++++++++++ 1 file changed, 16 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index df154bfd32b9..a60abb625ee5 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -73,6 +73,22 @@ config NAND_SUNXI The SPL driver only supports reading from the NAND using DMA transfers.
+if NAND_SUNXI
+config NAND_SUNXI_SPL_ECC_STRENGTH
- int "Allwinner NAND SPL ECC Strength"
- default 64
+config NAND_SUNXI_SPL_ECC_SIZE
- int "Allwinner NAND SPL ECC Step Size"
- default 1024
+config NAND_SUNXI_SPL_USABLE_PAGE_SIZE
- int "Allwinner NAND SPL Usable Page Size"
- default 1024
+endif
config NAND_ARASAN bool "Configure Arasan Nand" help