From: Michael Trimarchi michael@amarulasolutions.com
Add the needed DT overrides and configs to enable UART in SPL.
Cc: Fabio Estevam festevam@gmail.com Signed-off-by: Michael Trimarchi michael@amarulasolutions.com Tested-by: Suniel Mahesh sunil@amarulasolutions.com --- Note: Tested this patch on Engicam Starter Kit with I.CORE - M6 (MCIMX6Q7CVT08AC) SOM. --- arch/arm/dts/imx6qdl-icore-u-boot.dtsi | 16 ++++++++++++++++ arch/arm/dts/imx6ul-isiot-u-boot.dtsi | 16 ++++++++++++++++ board/engicam/common/spl.c | 20 +++----------------- configs/imx6dl_icore_nand_defconfig | 1 + configs/imx6q_icore_nand_defconfig | 1 + configs/imx6qdl_icore_mipi_defconfig | 1 + configs/imx6qdl_icore_mmc_defconfig | 1 + configs/imx6qdl_icore_nand_defconfig | 1 + configs/imx6qdl_icore_rqs_defconfig | 1 + 9 files changed, 41 insertions(+), 17 deletions(-)
diff --git a/arch/arm/dts/imx6qdl-icore-u-boot.dtsi b/arch/arm/dts/imx6qdl-icore-u-boot.dtsi index f95d49d00d..12e46e38f6 100644 --- a/arch/arm/dts/imx6qdl-icore-u-boot.dtsi +++ b/arch/arm/dts/imx6qdl-icore-u-boot.dtsi @@ -5,6 +5,22 @@
#include "imx6qdl-u-boot.dtsi"
+&soc { + u-boot,dm-pre-reloc; +}; + +&aips1 { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart4 { + u-boot,dm-pre-reloc; +}; + +&uart4 { + u-boot,dm-pre-reloc; +}; + &usdhc1 { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imx6ul-isiot-u-boot.dtsi b/arch/arm/dts/imx6ul-isiot-u-boot.dtsi index aa8e9804bf..7213e71989 100644 --- a/arch/arm/dts/imx6ul-isiot-u-boot.dtsi +++ b/arch/arm/dts/imx6ul-isiot-u-boot.dtsi @@ -5,6 +5,22 @@
#include "imx6ul-u-boot.dtsi"
+&soc { + u-boot,dm-pre-reloc; +}; + +&aips1 { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart1 { + u-boot,dm-pre-reloc; +}; + +&uart1 { + u-boot,dm-pre-reloc; +}; + &usdhc1 { u-boot,dm-spl; }; diff --git a/board/engicam/common/spl.c b/board/engicam/common/spl.c index 6a0612481a..f1ccdc3343 100644 --- a/board/engicam/common/spl.c +++ b/board/engicam/common/spl.c @@ -26,20 +26,6 @@ #include <asm/mach-imx/iomux-v3.h> #include <asm/mach-imx/video.h>
-#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) - -static iomux_v3_cfg_t const uart_pads[] = { -#ifdef CONFIG_MX6QDL - IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), - IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)), -#elif CONFIG_MX6UL - IOMUX_PADS(PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL)), - IOMUX_PADS(PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL)), -#endif -}; - #ifdef CONFIG_SPL_LOAD_FIT int board_fit_config_name_match(const char *name) { @@ -421,12 +407,12 @@ void board_init_f(ulong dummy) if (!(is_mx6ul())) gpr_init();
- /* iomux */ - SETUP_IOMUX_PADS(uart_pads); - /* setup GP timer */ timer_init();
+ /* Enable device tree and early DM support*/ + spl_early_init(); + /* UART clocks enabled and gd valid - init serial console */ preloader_console_init();
diff --git a/configs/imx6dl_icore_nand_defconfig b/configs/imx6dl_icore_nand_defconfig index fe4866e2f5..af5873a784 100644 --- a/configs/imx6dl_icore_nand_defconfig +++ b/configs/imx6dl_icore_nand_defconfig @@ -66,6 +66,7 @@ CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y CONFIG_VIDEO=y diff --git a/configs/imx6q_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig index 2cb995e7ae..8535627049 100644 --- a/configs/imx6q_icore_nand_defconfig +++ b/configs/imx6q_icore_nand_defconfig @@ -67,6 +67,7 @@ CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y CONFIG_VIDEO=y diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig index 90eb153c45..8dd5e89511 100644 --- a/configs/imx6qdl_icore_mipi_defconfig +++ b/configs/imx6qdl_icore_mipi_defconfig @@ -74,5 +74,6 @@ CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index 9f6d29a268..46497fbde1 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -90,6 +90,7 @@ CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y CONFIG_VIDEO=y diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig index 2cb995e7ae..8535627049 100644 --- a/configs/imx6qdl_icore_nand_defconfig +++ b/configs/imx6qdl_icore_nand_defconfig @@ -67,6 +67,7 @@ CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_IMX_THERMAL=y CONFIG_VIDEO=y diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig index ee2c597bcb..3bab6739d0 100644 --- a/configs/imx6qdl_icore_rqs_defconfig +++ b/configs/imx6qdl_icore_rqs_defconfig @@ -72,4 +72,5 @@ CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y