Update prcm, voltages and pinmux support for am574x-idk.
Signed-off-by: Lokesh Vutla lokeshvutla@ti.com --- arch/arm/include/asm/omap_common.h | 1 + board/ti/am57xx/board.c | 9 ++++++--- 2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 9624fb81fa..5710136e88 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -597,6 +597,7 @@ extern struct prcm_regs const dra7xx_prcm; extern struct dplls const **dplls_data; extern struct dplls dra7xx_dplls; extern struct dplls dra72x_dplls; +extern struct dplls dra76x_dplls; extern struct vcores_data const **omap_vcores; extern const u32 sys_clk_array[8]; extern struct omap_sys_ctrl_regs const **ctrl; diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index 082346d2b1..2d14ae54fe 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -535,7 +535,7 @@ invalid_eeprom:
void vcores_init(void) { - if (board_is_am572x_idk()) + if (board_is_am572x_idk() || board_is_am574x_idk()) *omap_vcores = &am572x_idk_volts; else if (board_is_am571x_idk()) *omap_vcores = &am571x_idk_volts; @@ -548,6 +548,8 @@ void hw_data_init(void) *prcm = &dra7xx_prcm; if (is_dra72x()) *dplls_data = &dra72x_dplls; + else if (is_dra76x()) + *dplls_data = &dra76x_dplls; else *dplls_data = &dra7xx_dplls; *ctrl = &dra7xx_ctrl; @@ -688,7 +690,7 @@ void recalibrate_iodelay(void) int pconf_sz, iod_sz, delta_iod_sz = 0; int ret;
- if (board_is_am572x_idk()) { + if (board_is_am572x_idk() || board_is_am574x_idk()) { pconf = core_padconf_array_essential_am572x_idk; pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am572x_idk); iod = iodelay_cfg_array_am572x_idk; @@ -995,7 +997,8 @@ int board_eth_init(bd_t *bis) writel(ctrl_val, (*ctrl)->control_core_control_io1);
/* The phy address for the AM57xx IDK are different than x15 */ - if (board_is_am572x_idk() || board_is_am571x_idk()) { + if (board_is_am572x_idk() || board_is_am571x_idk() || + board_is_am574x_idk()) { cpsw_data.slave_data[0].phy_addr = 0; cpsw_data.slave_data[1].phy_addr = 1; }