Hi, On Jul 10, 2013 11:04 PM, "Sughosh Ganu" urwithsughosh@gmail.com wrote:
On Wed, Jul 10, 2013 at 3:21 PM, Sughosh Ganu <urwithsughosh@gmail.com wrote:
hi Tom,
On Tue Jul 09, 2013 at 05:19:32PM -0400, Tom Rini wrote:
<snip>
Yes, I am not really comfortable with this. I will see if I can
write
some
sandbox tests for the other image types today and post my results. I
guess
this bootm code has built up over a long time and it is hard to know
all
the ways it is used.
Important, but I really want to see real-world booting in a case or
two.
Unfortunately I don't have any ARM boards that work out of the box
with
NetBSD.
I have netbsd running on hawkboard, but i do not boot it using the bootm command, but use the go command instead. I will try to build a netbsd image with the u-boot header and give it a try with bootm. Need a day or two to check this out though.
Tried to boot netbsd with u-boot head 225fd8c5d45, and the boot fails. Was able to boot netbsd with v2012.10 u-boot image. Btw, am i supposed to
apply
any patch on top of the said commit.
Yes please see the four commits I sent earlier today.
Regards, Simon
hawkboard > bootm c3000000 ## Booting kernel from Legacy Image at c3000000 ... Image Name: Netbsd Image Type: ARM NetBSD Kernel Image (uncompressed) Data Size: 2329152 Bytes = 2.2 MiB Load Address: c0200000 Entry Point: c0200000 Verifying Checksum ... OK Loading Kernel Image ... OK OK subcommand not supported hawkboard >
-sughosh
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot