Hi Jagannadha,
On Wed, 8 Jan 2014 15:53:07 +0530, Jagannadha Sutradharudu Teki jagannadha.sutradharudu-teki@xilinx.com wrote:
These changes are from u-boot-xlnx.git repo from git.xilinx.com and in addition of basic fdt support. This repo is well tested on xilinx zynq platform, hence pushing the same on upstream.
Excluded qspi and nand changes from previous series.
Please note that all this series available in u-boot-spi.git/master-xlnx repo.
-- Thanks, Jagan.
Changes for v4:
- rebase to master
- Removed CONFIG_SYS_NO_FLASH in zynq-common.h
As the series was rebased tu u-boot/master, not u-boot-arm/master, all patches adding board support failed to apply properly due to boards.cfg differences.
I did resolve these manually, but at build-test time, all Zynq boards failed with "Makefile:11: *** Please define CONFIG_DEFAULT_DEVICE_TREE in your board header file. Stop." -- and were the only ones to do so.
Jagan, can you look into this and produce a v5 which can build on ARM?
Amicalement,