Move the musb config and platdata to the sunxi-musb glue, which is where it really belongs. This is preparation patch for adding device-model support for the sunxi-musb-host code.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- arch/arm/include/asm/arch-sunxi/usb_phy.h | 7 +++++++ board/sunxi/board.c | 28 ++----------------------- drivers/usb/musb-new/sunxi.c | 35 ++++++++++++++++++++++--------- 3 files changed, 34 insertions(+), 36 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/usb_phy.h b/arch/arm/include/asm/arch-sunxi/usb_phy.h index 5a9cacb..17d31b8 100644 --- a/arch/arm/include/asm/arch-sunxi/usb_phy.h +++ b/arch/arm/include/asm/arch-sunxi/usb_phy.h @@ -19,3 +19,10 @@ void sunxi_usb_phy_power_off(int index); int sunxi_usb_phy_vbus_detect(int index); int sunxi_usb_phy_id_detect(int index); void sunxi_usb_phy_enable_squelch_detect(int index, int enable); + +/* Not really phy related, but we have to declare this somewhere ... */ +#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET) +void sunxi_musb_board_init(void); +#else +#define sunxi_musb_board_init() +#endif diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 2638bc1..e14725f 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -34,7 +34,6 @@ #include <asm/arch/usb_phy.h> #include <asm/gpio.h> #include <asm/io.h> -#include <linux/usb/musb.h> #include <net.h>
#if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD) @@ -467,28 +466,6 @@ void sunxi_board_init(void) } #endif
-#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET) -extern const struct musb_platform_ops sunxi_musb_ops; - -static struct musb_hdrc_config musb_config = { - .multipoint = 1, - .dyn_fifo = 1, - .num_eps = 6, - .ram_bits = 11, -}; - -static struct musb_hdrc_platform_data musb_plat = { -#if defined(CONFIG_MUSB_HOST) - .mode = MUSB_HOST, -#else - .mode = MUSB_PERIPHERAL, -#endif - .config = &musb_config, - .power = 250, - .platform_ops = &sunxi_musb_ops, -}; -#endif - #ifdef CONFIG_USB_GADGET int g_dnl_board_usb_cable_connected(void) { @@ -551,9 +528,8 @@ int misc_init_r(void) if (ret) return ret; #endif -#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET) - musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE); -#endif + sunxi_musb_board_init(); + return 0; } #endif diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index cafb480..cbd2954 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -26,17 +26,9 @@ #include <asm/arch/gpio.h> #include <asm/arch/usb_phy.h> #include <asm-generic/gpio.h> +#include <linux/usb/musb.h> #include "linux-compat.h" #include "musb_core.h" -#ifdef CONFIG_AXP152_POWER -#include <axp152.h> -#endif -#ifdef CONFIG_AXP209_POWER -#include <axp209.h> -#endif -#ifdef CONFIG_AXP221_POWER -#include <axp221.h> -#endif
/****************************************************************************** ****************************************************************************** @@ -277,8 +269,31 @@ static int sunxi_musb_init(struct musb *musb) return 0; }
-const struct musb_platform_ops sunxi_musb_ops = { +static const struct musb_platform_ops sunxi_musb_ops = { .init = sunxi_musb_init, .enable = sunxi_musb_enable, .disable = sunxi_musb_disable, }; + +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 6, + .ram_bits = 11, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#if defined(CONFIG_MUSB_HOST) + .mode = MUSB_HOST, +#else + .mode = MUSB_PERIPHERAL, +#endif + .config = &musb_config, + .power = 250, + .platform_ops = &sunxi_musb_ops, +}; + +void sunxi_musb_board_init(void) +{ + musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE); +}