This is not used in U-Boot at present. Drop it and related config options.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/nds32/include/asm/arch-ag102/ag102.h | 2 - drivers/pci/Makefile | 1 - drivers/pci/pci_ftpci100.c | 319 ---------------------- scripts/config_whitelist.txt | 4 - 4 files changed, 326 deletions(-) delete mode 100644 drivers/pci/pci_ftpci100.c
diff --git a/arch/nds32/include/asm/arch-ag102/ag102.h b/arch/nds32/include/asm/arch-ag102/ag102.h index d1f4b02e10e..3255db6592e 100644 --- a/arch/nds32/include/asm/arch-ag102/ag102.h +++ b/arch/nds32/include/asm/arch-ag102/ag102.h @@ -11,8 +11,6 @@ * Hardware register bases */
-/* PCI Controller */ -#define CONFIG_FTPCI100_BASE 0x90000000 /* LPC Controller */ #define CONFIG_LPC_IO_BASE 0x90100000 /* LPC Controller */ diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 83d7a4e403c..bdfdec98a08 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_PCI_GT64120) += pci_gt64120.o obj-$(CONFIG_PCI_MPC85XX) += pci_mpc85xx.o obj-$(CONFIG_PCI_MSC01) += pci_msc01.o obj-$(CONFIG_PCIE_IMX) += pcie_imx.o -obj-$(CONFIG_FTPCI100) += pci_ftpci100.o obj-$(CONFIG_PCI_MVEBU) += pci_mvebu.o obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o obj-$(CONFIG_PCI_RCAR_GEN3) += pci-rcar-gen3.o diff --git a/drivers/pci/pci_ftpci100.c b/drivers/pci/pci_ftpci100.c deleted file mode 100644 index 32fac878a67..00000000000 --- a/drivers/pci/pci_ftpci100.c +++ /dev/null @@ -1,319 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Faraday FTPCI100 PCI Bridge Controller Device Driver Implementation - * - * Copyright (C) 2011 Andes Technology Corporation - * Gavin Guo, Andes Technology Corporation gavinguo@andestech.com - * Macpaul Lin, Andes Technology Corporation macpaul@andestech.com - */ -#include <common.h> -#include <init.h> -#include <log.h> -#include <malloc.h> -#include <pci.h> - -#include <faraday/ftpci100.h> - -#include <asm/io.h> -#include <asm/types.h> /* u32, u16.... used by pci.h */ - -struct ftpci100_data { - unsigned int reg_base; - unsigned int io_base; - unsigned int mem_base; - unsigned int mmio_base; - unsigned int ndevs; -}; - -static struct pci_config devs[FTPCI100_MAX_FUNCTIONS]; -static struct pci_controller local_hose; - -static void setup_pci_bar(unsigned int bus, unsigned int dev, unsigned func, - unsigned char header, struct ftpci100_data *priv) -{ - struct pci_controller *hose = (struct pci_controller *)&local_hose; - unsigned int i, tmp32, bar_no, iovsmem = 1; - pci_dev_t dev_nu; - - /* A device is present, add an entry to the array */ - devs[priv->ndevs].bus = bus; - devs[priv->ndevs].dev = dev; - devs[priv->ndevs].func = func; - - dev_nu = PCI_BDF(bus, dev, func); - - if ((header & 0x7f) == 0x01) - /* PCI-PCI Bridge */ - bar_no = 2; - else - bar_no = 6; - - /* Allocate address spaces by configuring BARs */ - for (i = 0; i < bar_no; i++) { - pci_hose_write_config_dword(hose, dev_nu, - PCI_BASE_ADDRESS_0 + i * 4, 0xffffffff); - pci_hose_read_config_dword(hose, dev_nu, - PCI_BASE_ADDRESS_0 + i * 4, &tmp32); - - if (tmp32 == 0x0) - continue; - - /* IO space */ - if (tmp32 & 0x1) { - iovsmem = 0; - unsigned int size_mask = ~(tmp32 & 0xfffffffc); - - if (priv->io_base & size_mask) - priv->io_base = (priv->io_base & ~size_mask) + \ - size_mask + 1; - - devs[priv->ndevs].bar[i].addr = priv->io_base; - devs[priv->ndevs].bar[i].size = size_mask + 1; - - pci_hose_write_config_dword(hose, dev_nu, - PCI_BASE_ADDRESS_0 + i * 4, - priv->io_base); - - debug("Allocated IO address 0x%X-" \ - "0x%X for Bus %d, Device %d, Function %d\n", - priv->io_base, - priv->io_base + size_mask, bus, dev, func); - - priv->io_base += size_mask + 1; - } else { - /* Memory space */ - unsigned int is_64bit = ((tmp32 & 0x6) == 0x4); - unsigned int is_pref = tmp32 & 0x8; - unsigned int size_mask = ~(tmp32 & 0xfffffff0); - unsigned int alloc_base; - unsigned int *addr_mem_base; - - if (is_pref) - addr_mem_base = &priv->mem_base; - else - addr_mem_base = &priv->mmio_base; - - alloc_base = *addr_mem_base; - - if (alloc_base & size_mask) - alloc_base = (alloc_base & ~size_mask) \ - + size_mask + 1; - - pci_hose_write_config_dword(hose, dev_nu, - PCI_BASE_ADDRESS_0 + i * 4, alloc_base); - - debug("Allocated %s address 0x%X-" \ - "0x%X for Bus %d, Device %d, Function %d\n", - is_pref ? "MEM" : "MMIO", alloc_base, - alloc_base + size_mask, bus, dev, func); - - devs[priv->ndevs].bar[i].addr = alloc_base; - devs[priv->ndevs].bar[i].size = size_mask + 1; - - debug("BAR address BAR size\n"); - debug("%010x %08d\n", - devs[priv->ndevs].bar[0].addr, - devs[priv->ndevs].bar[0].size); - - alloc_base += size_mask + 1; - *addr_mem_base = alloc_base; - - if (is_64bit) { - i++; - pci_hose_write_config_dword(hose, dev_nu, - PCI_BASE_ADDRESS_0 + i * 4, 0x0); - } - } - } - - /* Enable Bus Master, Memory Space, and IO Space */ - pci_hose_read_config_dword(hose, dev_nu, PCI_CACHE_LINE_SIZE, &tmp32); - pci_hose_write_config_dword(hose, dev_nu, PCI_CACHE_LINE_SIZE, 0x08); - pci_hose_read_config_dword(hose, dev_nu, PCI_CACHE_LINE_SIZE, &tmp32); - - pci_hose_read_config_dword(hose, dev_nu, PCI_COMMAND, &tmp32); - - tmp32 &= 0xffff; - - if (iovsmem == 0) - tmp32 |= 0x5; - else - tmp32 |= 0x6; - - pci_hose_write_config_dword(hose, dev_nu, PCI_COMMAND, tmp32); -} - -static void pci_bus_scan(struct ftpci100_data *priv) -{ - struct pci_controller *hose = (struct pci_controller *)&local_hose; - unsigned int bus, dev, func; - pci_dev_t dev_nu; - unsigned int data32; - unsigned int tmp; - unsigned char header; - unsigned char int_pin; - unsigned int niobars; - unsigned int nmbars; - - priv->ndevs = 1; - - nmbars = 0; - niobars = 0; - - for (bus = 0; bus < MAX_BUS_NUM; bus++) - for (dev = 0; dev < MAX_DEV_NUM; dev++) - for (func = 0; func < MAX_FUN_NUM; func++) { - dev_nu = PCI_BDF(bus, dev, func); - pci_hose_read_config_dword(hose, dev_nu, - PCI_VENDOR_ID, &data32); - - /* - * some broken boards return 0 or ~0, - * if a slot is empty. - */ - if (data32 == 0xffffffff || - data32 == 0x00000000 || - data32 == 0x0000ffff || - data32 == 0xffff0000) - continue; - - pci_hose_read_config_dword(hose, dev_nu, - PCI_HEADER_TYPE, &tmp); - header = (unsigned char)tmp; - setup_pci_bar(bus, dev, func, header, priv); - - devs[priv->ndevs].v_id = (u16)(data32 & \ - 0x0000ffff); - - devs[priv->ndevs].d_id = (u16)((data32 & \ - 0xffff0000) >> 16); - - /* Figure out what INTX# line the card uses */ - pci_hose_read_config_byte(hose, dev_nu, - PCI_INTERRUPT_PIN, &int_pin); - - /* assign the appropriate irq line */ - if (int_pin > PCI_IRQ_LINES) { - printf("more irq lines than expect\n"); - } else if (int_pin != 0) { - /* This device uses an interrupt line */ - devs[priv->ndevs].pin = int_pin; - } - - pci_hose_read_config_dword(hose, dev_nu, - PCI_CLASS_DEVICE, &data32); - - debug("%06d %03d %03d " \ - "%04d %08x %08x " \ - "%03d %08x %06d %08x\n", - priv->ndevs, devs[priv->ndevs].bus, - devs[priv->ndevs].dev, - devs[priv->ndevs].func, - devs[priv->ndevs].d_id, - devs[priv->ndevs].v_id, - devs[priv->ndevs].pin, - devs[priv->ndevs].bar[0].addr, - devs[priv->ndevs].bar[0].size, - data32 >> 8); - - priv->ndevs++; - } -} - -static void ftpci_preinit(struct ftpci100_data *priv) -{ - struct ftpci100_ahbc *ftpci100; - struct pci_controller *hose = (struct pci_controller *)&local_hose; - u32 pci_config_addr; - u32 pci_config_data; - - priv->reg_base = CONFIG_FTPCI100_BASE; - priv->io_base = CONFIG_FTPCI100_BASE + CONFIG_FTPCI100_IO_SIZE; - priv->mmio_base = CONFIG_FTPCI100_MEM_BASE; - priv->mem_base = CONFIG_FTPCI100_MEM_BASE + CONFIG_FTPCI100_MEM_SIZE; - - ftpci100 = (struct ftpci100_ahbc *)priv->reg_base; - - pci_config_addr = (u32) &ftpci100->conf; - pci_config_data = (u32) &ftpci100->data; - - /* print device name */ - printf("FTPCI100\n"); - - /* dump basic configuration */ - debug("%s: Config addr is %08X, data port is %08X\n", - __func__, pci_config_addr, pci_config_data); - - /* PCI memory space */ - pci_set_region(hose->regions + 0, - CONFIG_PCI_MEM_BUS, - CONFIG_PCI_MEM_PHYS, - CONFIG_PCI_MEM_SIZE, - PCI_REGION_MEM); - hose->region_count++; - - /* PCI IO space */ - pci_set_region(hose->regions + 1, - CONFIG_PCI_IO_BUS, - CONFIG_PCI_IO_PHYS, - CONFIG_PCI_IO_SIZE, - PCI_REGION_IO); - hose->region_count++; - -#if defined(CONFIG_PCI_SYS_BUS) - /* PCI System Memory space */ - pci_set_region(hose->regions + 2, - CONFIG_PCI_SYS_BUS, - CONFIG_PCI_SYS_PHYS, - CONFIG_PCI_SYS_SIZE, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - hose->region_count++; -#endif - - /* setup indirect read/write function */ - pci_setup_indirect(hose, pci_config_addr, pci_config_data); - - /* register hose */ - pci_register_hose(hose); -} - -void pci_ftpci_init(void) -{ - struct ftpci100_data *priv = NULL; - struct pci_controller *hose = (struct pci_controller *)&local_hose; - pci_dev_t bridge_num; - - struct pci_device_id bridge_ids[] = { - {FTPCI100_BRIDGE_VENDORID, FTPCI100_BRIDGE_DEVICEID}, - {0, 0} - }; - - priv = malloc(sizeof(struct ftpci100_data)); - - if (!priv) { - printf("%s(): failed to malloc priv\n", __func__); - return; - } - - memset(priv, 0, sizeof(struct ftpci100_data)); - - ftpci_preinit(priv); - - debug("Device bus dev func deviceID vendorID pin address" \ - " size class\n"); - - pci_bus_scan(priv); - - /* - * Setup the PCI Bridge Window to 1GB, - * it will cause USB OHCI Host controller Unrecoverable Error - * if it is not set. - */ - bridge_num = pci_find_devices(bridge_ids, 0); - if (bridge_num == -1) { - printf("PCI Bridge not found\n"); - return; - } - pci_hose_write_config_dword(hose, bridge_num, PCI_MEM_BASE_SIZE1, - FTPCI100_BASE_ADR_SIZE(1024)); -} diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index f947ecdb3eb..98a80680f6e 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -505,10 +505,6 @@ CONFIG_FTINTC010_BASE CONFIG_FTLCDC100_BASE CONFIG_FTMAC100_BASE CONFIG_FTMAC110_BASE -CONFIG_FTPCI100_BASE -CONFIG_FTPCI100_IO_SIZE -CONFIG_FTPCI100_MEM_BASE -CONFIG_FTPCI100_MEM_SIZE CONFIG_FTPMU010 CONFIG_FTPMU010_BASE CONFIG_FTPMU010_POWER