Re: [U-Boot-Users] How to change MPU frequency in U-Boot?

13 Jun 2006


      Hi,
From: "phAntOm yAng" dalalilala@hellokitty.com
...
Now, I'm working on OMAP5912OSK with U-Boot 1.1.4-gb1d71358-dirty.
The message of print_cpuinfo() is:
CPU:   OMAP1611b at 96.0 MHz (DPLL1=96.0 MHz)
But OMAP5912OSK should work on 192MHz.
How to let OMAP5912 work on 192MHz during U-Boot phase?
You might want to check this:
http://linux.omap.com/pipermail/linux-omap-open-source/2006-February/006416....
Hope this helps.
(Hiroki Kaminaga)
--