On 27.01.2015 15:22, Tom Rini wrote:
We had the problem on an AM33xx platform, that SPL detected an unsupported boot-device. But since this message is a debug message it took a bit of time to really know, where the hangup in SPL resulted from. So let's change this debug message to a printf and also print the detected boot-device that is not supported. This makes debugging of such cases much easier.
Signed-off-by: Stefan Roese sr@denx.de Cc: Wolfgang Denk wd@denx.de Cc: Tom Rini trini@ti.com Acked-by: Heiko Schocher hs@denx.de
Applied to u-boot/master, thanks!
This patch is causing problem on Microblaze because SPL exceed 4k limit. It is only one printf which is called in entire SPL that's why this should be solved a little bit differently.
OK, but for clarity you need and are using both CONFIG_SPL_SERIAL_SUPPORT and CONFIG_SPL_LIBCOMMON_SUPPORT because you're using puts but not printf, yes?
Right. If this is the case (only puts usage on Microblaze), then its perhaps best that I change this line to puts as well. Okay?
Thanks, Stefan