Re: [PATCH 05/19] ARM: dts: stm32: Add alternate pinmux for MP13 I2C5 pins

On 4/22/24 01:16, Marek Vasut wrote:

Add another mux option for I2C5 pins, this is used on DH electronics STM32MP13xx DHCOR DHSBC board.

Signed-off-by: Marek Vasut marex@denx.de

Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com Cc: u-boot@dh-electronics.com Cc: uboot-stm32@st-md-mailman.stormreply.com

---

arch/arm/dts/stm32mp13-pinctrl.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)

diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi b/arch/arm/dts/stm32mp13-pinctrl.dtsi index 899f0f98e1a..cfbae71efc7 100644 --- a/arch/arm/dts/stm32mp13-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi @@ -151,6 +151,23 @@ }; };

• i2c5_pins_b: i2c5-1 {

• pins {
  

• 	pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */
  

• 		 <STM32_PINMUX('E', 13, AF4)>; /* I2C5_SDA */
  

• 	bias-disable;
  

• 	drive-open-drain;
  

• 	slew-rate = <0>;
  

• };
  

• };
• i2c5_sleep_pins_b: i2c5-sleep-1 {

• pins {
  

• 	pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */
  

• 		 <STM32_PINMUX('E', 13, ANALOG)>; /* I2C5_SDA */
  

• };
  

• };
• mcp23017_pins_a: mcp23017-0 { pins { pinmux = <STM32_PINMUX('G', 12, GPIO)>;

Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com

Thanks Patrice