Hi Vladimir,
This is required to relocate SPI on the MPC852T. Presumably, similar fix is required for relocating I2C.
Regards, David
On 3/31/06, Vladimir Gurevich vag@paulidav.org wrote:
Hello David,
David Ho wrote:
Vladimir's patch works fine on my MPC852T.
SPI and SMC1 functional.
However I do not use I2C and SMC2.
Thanks a lot for the testing (and for the good news).
Can you tell me which mode did you actually test? For example, have you tried to relocate SPI or SMC1 parameter areas or just left them where they were? (both modes are broken in the current U-boot anyway).
Actually, the main CPU I used was MPC852T as well, so I am am pretty confident that any combination should work there provided that you configured it according to the doc.
Do you happen to have any other 8xx CPUs to test with?
Happy hacking, Vladimir