Add supporting new compatible string "u-boot,zynqmp-fpga-ddrauth" to handle loading authenticated images (DDR).
Based on solution by Jorge Ramirez-Ortiz jorge@foundries.io Signed-off-by: Oleksandr Suvorov oleksandr.suvorov@foundries.io ---
Changes in v10: - Support DDR images only if FPGA_LOAD_SECURE enabled.
boot/Kconfig | 4 ++-- doc/uImage.FIT/source_file_format.txt | 5 ++++- drivers/fpga/zynqmppl.c | 25 +++++++++++++++++++++++-- include/xilinx.h | 1 + include/zynqmppl.h | 4 ++++ 5 files changed, 34 insertions(+), 5 deletions(-)
diff --git a/boot/Kconfig b/boot/Kconfig index 08451c65a56..e30643d3071 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -210,8 +210,8 @@ config SPL_LOAD_FIT 1. "loadables" images, other than FDTs, which do not have a "load" property will not be loaded. This limitation also applies to FPGA images with the correct "compatible" string. - 2. For FPGA images, only the "compatible" = "u-boot,fpga-legacy" - loading method is supported. + 2. For FPGA images, the supported "compatible" list is in the + doc/uImage.FIT/source_file_format.txt. 3. FDTs are only loaded for images with an "os" property of "u-boot". "linux" images are also supported with Falcon boot mode.
diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt index f93ac6d1c7b..461e2af2a84 100644 --- a/doc/uImage.FIT/source_file_format.txt +++ b/doc/uImage.FIT/source_file_format.txt @@ -184,7 +184,10 @@ the '/images' node should have the following layout: Mandatory for types: "firmware", and "kernel". - compatible : compatible method for loading image. Mandatory for types: "fpga", and images that do not specify a load address. - To use the generic fpga loading routine, use "u-boot,fpga-legacy". + Supported compatible methods: + "u-boot,fpga-legacy" - the generic fpga loading routine. + "u-boot,zynqmp-fpga-ddrauth" - signed non-encrypted FPGA bitstream for + Xilinx Zynq UltraScale+ (ZymqMP) device.
Optional nodes: - hash-1 : Each hash sub-node represents separate hash or checksum diff --git a/drivers/fpga/zynqmppl.c b/drivers/fpga/zynqmppl.c index 5e74360220e..bb0ff832b79 100644 --- a/drivers/fpga/zynqmppl.c +++ b/drivers/fpga/zynqmppl.c @@ -9,6 +9,7 @@ #include <common.h> #include <compiler.h> #include <cpu_func.h> +#include <fpga.h> #include <log.h> #include <zynqmppl.h> #include <zynqmp_firmware.h> @@ -232,7 +233,9 @@ static int zynqmp_load(xilinx_desc *desc, const void *buf, u32 buf_lo, buf_hi; u32 bsize_req = (u32)bsize; u32 ret_payload[PAYLOAD_ARG_CNT]; - +#if CONFIG_IS_ENABLED(FPGA_LOAD_SECURE) + struct fpga_secure_info info = { 0 }; +#endif debug("%s called!\n", __func__);
if (zynqmp_check_compatible(desc, flags)) { @@ -240,6 +243,21 @@ static int zynqmp_load(xilinx_desc *desc, const void *buf, return FPGA_FAIL; }
+ switch (flags) { + case FPGA_LEGACY: + break; /* Handle the legacy image later in this function */ +#if CONFIG_IS_ENABLED(FPGA_LOAD_SECURE) + case FPGA_XILINX_ZYNQMP_DDRAUTH: + /* DDR authentication */ + info.authflag = ZYNQMP_FPGA_AUTH_DDR; + info.encflag = FPGA_NO_ENC_OR_NO_AUTH; + return desc->operations->loads(desc, buf, bsize, &info); +#endif + default: + puts("Unsupported bitstream type\n"); + return FPGA_FAIL; + } + if (zynqmp_firmware_version() <= PMUFW_V1_0) { puts("WARN: PMUFW v1.0 or less is detected\n"); puts("WARN: Not all bitstream formats are supported\n"); @@ -334,7 +352,10 @@ static int zynqmp_str2flag(xilinx_desc *desc, const char *str) { if (!strncmp(str, "u-boot,fpga-legacy", 18)) return FPGA_LEGACY; - +#if CONFIG_IS_ENABLED(FPGA_LOAD_SECURE) + if (!strncmp(str, "u-boot,zynqmp-fpga-ddrauth", 26)) + return FPGA_XILINX_ZYNQMP_DDRAUTH; +#endif return 0; }
diff --git a/include/xilinx.h b/include/xilinx.h index 89a12818311..ffd95ad7225 100644 --- a/include/xilinx.h +++ b/include/xilinx.h @@ -39,6 +39,7 @@ typedef enum { /* typedef xilinx_family */
/* FPGA bitstream supported types */ #define FPGA_LEGACY BIT(0) +#define FPGA_XILINX_ZYNQMP_DDRAUTH BIT(1)
typedef struct { /* typedef xilinx_desc */ xilinx_family family; /* part type */ diff --git a/include/zynqmppl.h b/include/zynqmppl.h index 8401a850afb..87ccd2f394c 100644 --- a/include/zynqmppl.h +++ b/include/zynqmppl.h @@ -25,6 +25,10 @@
extern struct xilinx_fpga_op zynqmp_op;
+#if CONFIG_IS_ENABLED(FPGA_LOAD_SECURE) +#define ZYNQMP_FPGA_FLAGS (FPGA_LEGACY | FPGA_XILINX_ZYNQMP_DDRAUTH) +#else #define ZYNQMP_FPGA_FLAGS (FPGA_LEGACY) +#endif
#endif /* _ZYNQMPPL_H_ */