Beaver is a Tegra30 board that is nearly 100% compatible w/Cardhu. Add a Beaver build so it can begin to be differentiated, if need be.
Signed-off-by: Tom Warren twarren@nvidia.com --- board/nvidia/beaver/Makefile | 38 +++++++++++++++++++++ board/nvidia/dts/tegra30-beaver.dts | 66 +++++++++++++++++++++++++++++++++++++ boards.cfg | 1 + 3 files changed, 105 insertions(+) create mode 100644 board/nvidia/beaver/Makefile create mode 100644 board/nvidia/dts/tegra30-beaver.dts
diff --git a/board/nvidia/beaver/Makefile b/board/nvidia/beaver/Makefile new file mode 100644 index 0000000..9510f60 --- /dev/null +++ b/board/nvidia/beaver/Makefile @@ -0,0 +1,38 @@ +# +# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see http://www.gnu.org/licenses/. +# + +include $(TOPDIR)/config.mk + +$(shell mkdir -p $(obj)../cardhu) + +LIB = $(obj)lib$(BOARD).o + +COBJS = ../cardhu/cardhu.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/nvidia/dts/tegra30-beaver.dts b/board/nvidia/dts/tegra30-beaver.dts new file mode 100644 index 0000000..84aff51 --- /dev/null +++ b/board/nvidia/dts/tegra30-beaver.dts @@ -0,0 +1,66 @@ +/dts-v1/; + +#include "tegra30.dtsi" + +/ { + model = "NVIDIA Beaver"; + compatible = "nvidia,beaver", "nvidia,tegra30"; + + aliases { + i2c0 = "/i2c@7000d000"; + i2c1 = "/i2c@7000c000"; + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; + i2c4 = "/i2c@7000c700"; + sdhci0 = "/sdhci@78000600"; + sdhci1 = "/sdhci@78000000"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + }; + + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + sdhci@78000000 { + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 31 0>; /* gpio PD7 */ + bus-width = <4>; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + }; +}; diff --git a/boards.cfg b/boards.cfg index 1acf56a..676f25c 100644 --- a/boards.cfg +++ b/boards.cfg @@ -310,6 +310,7 @@ seaboard arm armv7:arm720t seaboard nvidia ventana arm armv7:arm720t ventana nvidia tegra20 whistler arm armv7:arm720t whistler nvidia tegra20 cardhu arm armv7:arm720t cardhu nvidia tegra30 +beaver arm armv7:arm720t beaver nvidia tegra30 dalmore arm armv7:arm720t dalmore nvidia tegra114 colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20 u8500_href arm armv7 u8500 st-ericsson u8500