Signed-off-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com --- arch/arm/dts/sun50i-a64-lynx.dts | 2 +- configs/lynx_defconfig | 84 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 85 insertions(+), 1 deletion(-) create mode 100644 configs/lynx_defconfig
diff --git a/arch/arm/dts/sun50i-a64-lynx.dts b/arch/arm/dts/sun50i-a64-lynx.dts index f968c5f..bc642b9 100644 --- a/arch/arm/dts/sun50i-a64-lynx.dts +++ b/arch/arm/dts/sun50i-a64-lynx.dts @@ -91,7 +91,7 @@
power { label = "lynx:orange:power"; - gpios = <&pio 9 11 GPIO_ACTIVE_HIGH>; + gpios = <&r_pio 0 11 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/configs/lynx_defconfig b/configs/lynx_defconfig new file mode 100644 index 0000000..7b773f1 --- /dev/null +++ b/configs/lynx_defconfig @@ -0,0 +1,84 @@ +CONFIG_ARM=y +CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN50I=y +CONFIG_PINCTRL=y +CONFIG_SUNXI_PINCTRL=y +CONFIG_CLK=y +CONFIG_DM_RESET=y +CONFIG_RESET_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-lynx" +CONFIG_OF_LIST="sun50i-a64-lynx" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_CONSOLE_MUX=y +CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_SPL_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_OF_LIBFDT=y +# CONFIG_SPL_LIBDISK_SUPPORT is not set +# CONFIG_SPL_POWER_SUPPORT is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FPGA is not set +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y + +CONFIG_CMD_MMC=y +CONFIG_DM_MMC=y +CONFIG_DM_MMC_OPS=y +# CONFIG_BLK is not set +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 + +CONFIG_LED=y +CONFIG_LED_GPIO=y + +CONFIG_CMD_I2C=y +CONFIG_I2C0_ENABLE=y +CONFIG_I2C1_ENABLE=y +CONFIG_I2C2_ENABLE=y +CONFIG_R_I2C_ENABLE=y + +CONFIG_DM_SPI=y +CONFIG_SUNXI_SPI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_FLASH=y + +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SF_DEFAULT_BUS=0 +CONFIG_SF_DEFAULT_CS=0 +CONFIG_SF_DEFAULT_SPEED=16000000 +CONFIG_SF_DEFAULT_MODE=0 + +# Support for running the dual-role controller in device-mode +CONFIG_USB_MUSB_GADGET=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB0_ID_DET="PG4" +CONFIG_USB0_VBUS_DET="PG8" +CONFIG_USB0_VBUS_PIN="PH11" + +CONFIG_G_DNL_MANUFACTURER="Theobroma Systems" +CONFIG_G_DNL_VENDOR_NUM=0x18D1 +CONFIG_G_DNL_PRODUCT_NUM=0x4EE0 + +# Support for USB mass storage emulation ('ums' command) +CONFIG_CMD_USB_MASS_STORAGE=y + +# +# Fastboot support +# +CONFIG_FASTBOOT=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_CMD_FASTBOOT=y +CONFIG_ANDROID_BOOT_IMAGE=y +CONFIG_FASTBOOT_BUF_ADDR=0x42000000 +CONFIG_FASTBOOT_BUF_SIZE=0x8000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=1 +CONFIG_FASTBOOT_GPT_NAME="gpt" +CONFIG_FASTBOOT_MBR_NAME="mbr"