From: Chris Morgan macromorgan@hotmail.com
Add support for the RG353PS to the Anbernic RGxx3. This device is a slightly pared down version of the RG353P with no eMMC, no touchscreen, and only 1GB of RAM.
Refactor board logic so that all supported devices are defined with ADC values and that future boards can be added by just defining the board values in the device array.
Signed-off-by: Chris Morgan macromorgan@hotmail.com --- board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c | 126 ++++++++++++++------- 1 file changed, 86 insertions(+), 40 deletions(-)
diff --git a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c index decc46db78..4d3c724b9c 100644 --- a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c +++ b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c @@ -7,24 +7,30 @@ #include <adc.h> #include <asm/io.h> #include <dm.h> +#include <dm/lists.h> +#include <env.h> +#include <fdt_support.h> #include <linux/delay.h> +#include <mmc.h> #include <pwm.h> #include <rng.h> #include <stdlib.h> -#include <mmc.h> -#include <env.h>
#define GPIO0_BASE 0xfdd60000 +#define GPIO_SWPORT_DR_L 0x0000 #define GPIO_SWPORT_DR_H 0x0004 +#define GPIO_SWPORT_DDR_L 0x0008 #define GPIO_SWPORT_DDR_H 0x000c -#define GPIO_A5 BIT(5) -#define GPIO_A6 BIT(6) +#define GPIO_C5 BIT(5) +#define GPIO_C6 BIT(6) +#define GPIO_C7 BIT(7)
#define GPIO_WRITEMASK(bits) ((bits) << 16)
#define DTB_DIR "rockchip/"
struct rg3xx_model { + const u16 adc_value; const char *board; const char *board_name; const char *fdtfile; @@ -34,49 +40,64 @@ enum rgxx3_device_id { RG353M, RG353P, RG353V, - RG353VS, RG503, + /* Devices with duplicate ADC value */ + RG353PS, + RG353VS, };
static const struct rg3xx_model rg3xx_model_details[] = { [RG353M] = { + 517, /* Observed average from device */ "rk3566-anbernic-rg353m", "RG353M", - DTB_DIR "rk3566-anbernic-rg353m.dtb", + DTB_DIR "rk3566-anbernic-rg353p.dtb", /* Identical devices */ }, [RG353P] = { + 860, /* Documented value of 860 */ "rk3566-anbernic-rg353p", "RG353P", DTB_DIR "rk3566-anbernic-rg353p.dtb", }, [RG353V] = { + 695, /* Observed average from device */ "rk3566-anbernic-rg353v", "RG353V", DTB_DIR "rk3566-anbernic-rg353v.dtb", }, - [RG353VS] = { - "rk3566-anbernic-rg353vs", - "RG353VS", - DTB_DIR "rk3566-anbernic-rg353vs.dtb", - }, [RG503] = { + 1023, /* Observed average from device */ "rk3566-anbernic-rg503", "RG503", DTB_DIR "rk3566-anbernic-rg503.dtb", }, + /* Devices with duplicate ADC value */ + [RG353PS] = { + 860, /* Observed average from device */ + "rk3566-anbernic-rg353ps", + "RG353PS", + DTB_DIR "rk3566-anbernic-rg353ps.dtb", + }, + [RG353VS] = { + 695, /* Gathered from second hand information */ + "rk3566-anbernic-rg353vs", + "RG353VS", + DTB_DIR "rk3566-anbernic-rg353vs.dtb", + }, };
/* * Start LED very early so user knows device is on. Set color - * to amber. + * to red. */ void spl_board_init(void) { - /* Set GPIO0_A5 and GPIO0_A6 to output. */ - writel(GPIO_WRITEMASK(GPIO_A6 | GPIO_A5) | (GPIO_A6 | GPIO_A5), + /* Set GPIO0_C5, GPIO0_C6, and GPIO0_C7 to output. */ + writel(GPIO_WRITEMASK(GPIO_C7 | GPIO_C6 | GPIO_C5) | \ + (GPIO_C7 | GPIO_C6 | GPIO_C5), (GPIO0_BASE + GPIO_SWPORT_DDR_H)); - /* Set GPIO0_A5 to 0 and GPIO0_A6 to 1. */ - writel(GPIO_WRITEMASK(GPIO_A6 | GPIO_A5) | GPIO_A6, + /* Set GPIO0_C5 and GPIO_C6 to 0 and GPIO0_C7 to 1. */ + writel(GPIO_WRITEMASK(GPIO_C7 | GPIO_C6 | GPIO_C5) | GPIO_C7, (GPIO0_BASE + GPIO_SWPORT_DR_H)); }
@@ -129,12 +150,12 @@ void __maybe_unused startup_buzz(void) /* Detect which Anbernic RGXX3 device we are using so as to load the * correct devicetree for Linux. Set an environment variable once * found. The detection depends on the value of ADC channel 1, the - * presence of an eMMC on mmc0, and querying the DSI panel (TODO). + * presence of an eMMC on mmc0, and querying the DSI panel. */ int rgxx3_detect_device(void) { u32 adc_info; - int ret; + int ret, i; int board_id = -ENXIO; struct mmc *mmc;
@@ -144,30 +165,37 @@ int rgxx3_detect_device(void) return ret; }
- /* Observed value 517. */ - if (adc_info > 505 && adc_info < 530) - board_id = RG353M; - /* Observed value 695. */ - if (adc_info > 680 && adc_info < 710) - board_id = RG353V; - /* Documented value 860. */ - if (adc_info > 850 && adc_info < 870) - board_id = RG353P; - /* Observed value 1023. */ - if (adc_info > 1010) - board_id = RG503; + /* + * Get the correct device from the table. The ADC value is + * determined by a resistor on ADC channel 0. The hardware + * design calls for no more than a 1% variance on the + * resistor, so assume a +- value of 15 should be enough. + */ + for (i = 0; i < ARRAY_SIZE(rg3xx_model_details); i++) { + u32 adc_min = rg3xx_model_details[i].adc_value - 15; + u32 adc_max = rg3xx_model_details[i].adc_value + 15; + + if (adc_min < adc_info && adc_max > adc_info) { + board_id = i; + break; + } + }
/* - * Try to access the eMMC on an RG353V. If it's missing, it's - * an RG353VS. Note we could also check for a touchscreen at - * 0x1a on i2c2. + * Try to access the eMMC on an RG353V or RG353P. If it's + * missing, it's an RG353VS or RG353PS. Note we could also + * check for a touchscreen at 0x1a on i2c2. */ - if (board_id == RG353V) { + if (board_id == RG353V || board_id == RG353P) { mmc = find_mmc_device(0); if (mmc) { ret = mmc_init(mmc); - if (ret) - board_id = RG353VS; + if (ret) { + if (board_id == RG353V) + board_id = RG353VS; + else + board_id = RG353PS; + } } }
@@ -186,18 +214,36 @@ int rk_board_late_init(void) { int ret;
- /* Turn off orange LED and turn on green LED. */ - writel(GPIO_WRITEMASK(GPIO_A6 | GPIO_A5) | GPIO_A5, - (GPIO0_BASE + GPIO_SWPORT_DR_H)); - ret = rgxx3_detect_device(); if (ret) { printf("Unable to detect device type: %d\n", ret); return ret; }
+ /* Turn off red LED and turn on orange LED. */ + writel(GPIO_WRITEMASK(GPIO_C7 | GPIO_C6 | GPIO_C5) | GPIO_C6, + (GPIO0_BASE + GPIO_SWPORT_DR_H)); + if (IS_ENABLED(CONFIG_DM_PWM)) startup_buzz();
return 0; } + +int ft_board_setup(void *blob, struct bd_info *bd) +{ + char *env; + + /* No fixups necessary for the RG503 */ + env = env_get("board_name"); + if (env && (!strcmp(env, rg3xx_model_details[RG503].board_name))) + return 0; + + /* Change the model name of the RG353M */ + if (env && (!strcmp(env, rg3xx_model_details[RG353M].board_name))) + fdt_setprop(blob, 0, "model", + rg3xx_model_details[RG353M].board_name, + sizeof(rg3xx_model_details[RG353M].board_name)); + + return 0; +}