I'am currently working on the following patch to get the imx8qm-rom7720-a1 board working with recent u-boot v2019.07. Unfortunaly I get no output on my serial line.
I'am not sure if something in my patch is just missing or if my composition of "SCFW + ATF + uboot" which is necessary for this imx8qm board, is not working the right way.
Perhaps somebody can guide me in the right direction to debug this further.
Currently I'am applying the patch and building u-boot this way:
$ export ATF_LOAD_ADDR=0x80000000 $ export BL33_LOAD_ADDR=0x80020000 $ make imx8qm_rom7720_a1_4G_defconfig $ make flash.bin $ dd if=u-boot.itb of=flash.bin bs=512 seek=854 $ sudo dd if=flash.bin of=/dev/sd[x] bs=1k seek=32 conv=fsync
Then I put the SD card into the board and power it on. But no output ony my serial line.
Best Regards,
Oliver Graute (1): imx: support i.MX8QM ROM 7720 a1 board
arch/arm/dts/Makefile | 1 + arch/arm/dts/imx8qm-rom7720-a1.dts | 373 ++++++++++++++++++ arch/arm/mach-imx/imx8/Kconfig | 7 + arch/arm/mach-imx/mkimage_fit_atf.sh | 3 + board/freescale/imx8qm_rom7720_a1/Kconfig | 14 + board/freescale/imx8qm_rom7720_a1/MAINTAINERS | 6 + board/freescale/imx8qm_rom7720_a1/Makefile | 11 + board/freescale/imx8qm_rom7720_a1/README | 53 +++ .../imx8qm_rom7720_a1/imx8qm_rom7720_a1.c | 181 +++++++++ .../freescale/imx8qm_rom7720_a1/imximage.cfg | 21 + board/freescale/imx8qm_rom7720_a1/spl.c | 228 +++++++++++ configs/imx8qm_rom7720_a1_4G_defconfig | 77 ++++ include/configs/imx8qm_rom7720.h | 293 ++++++++++++++ 13 files changed, 1268 insertions(+) create mode 100644 arch/arm/dts/imx8qm-rom7720-a1.dts create mode 100644 board/freescale/imx8qm_rom7720_a1/Kconfig create mode 100644 board/freescale/imx8qm_rom7720_a1/MAINTAINERS create mode 100644 board/freescale/imx8qm_rom7720_a1/Makefile create mode 100644 board/freescale/imx8qm_rom7720_a1/README create mode 100644 board/freescale/imx8qm_rom7720_a1/imx8qm_rom7720_a1.c create mode 100644 board/freescale/imx8qm_rom7720_a1/imximage.cfg create mode 100644 board/freescale/imx8qm_rom7720_a1/spl.c create mode 100644 configs/imx8qm_rom7720_a1_4G_defconfig create mode 100644 include/configs/imx8qm_rom7720.h