Hi all,
I am trying to port U-boot onto MPC8280 based Rattler board. I am getting the following messages and U-boot resets. Can anyone please give me some pointers to the problem? Thanks.
U-Boot 1.1.2 (Apr 20 2005 - 17:26:27)
MPC8260 Reset Status: External Soft, External Hard
MPC8260 Clock Configuration - Bus-to-Core Mult 4.5x, VCO Div 2, 60x Bus Freq 22-65 , Core Freq 100-300 - dfbrg 1, corecnf 0x07, busdf 5, cpmdf 1, plldf 0, pllmf 7 - vco_out 800000000, scc_clk 200000000, brg_clk 50000000 - cpu_clk 450000000, cpm_clk 400000000, bus_clk 100000000
CPU: MPC8260 (HiP7 Rev 13, Mask 0.1 1K49M) at 450 MHz DRAM: 16 MÀ
With Thanks and Regards, C.R.Srivatsan
***************************NOTE*********************************************** Deccanet Designs Ltd is now Flextronics Design Ltd, India ******************************************************************************
*************************DISCLAIMER******************************************* This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege of Flextronics Design Ltd. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from retaining, using, copying, altering or disclosing the contents of this message. ******************************************************************************