Subject: Re: [PATCH] imx8mq_evk: Update the required ATF branch
On Wed, Dec 11, 2019 at 7:49 AM Fabio Estevam festevam@gmail.com wrote:
Following the README instructions leads to a non-booting U-Boot:
U-Boot SPL 2020.01-rc3-00070-g9a0cbae22a (Nov 25 2019 - 13:08:24 -0300) PMIC: PFUZE100 ID=0x10 DDRINFO: start DRAM init DDRINFO:ddrphy calibration done DDRINFO: ddrmix config done Normal Boot Trying to boot from MMC2
(It hangs here)
Use the "imx_4.19.35_1.0.0" ATF branch instead, which fixes such problem and allow the boot to complete again.
We might need to switch upstream ATF, or stick to NXP vendor release one?
Shouldn't we address the mix-match of the firmware-imx versions as well?
I just increasing numbers over and over, and I was able to use firmware 8.5 which.
The readme lists both 7.9 and 8.0. There is also a typo on the line that reads "./firmware-imx-8.0" which should have a .bin appended to it.
It would nice to know what the differences are between the versions.
The version should already be in yocto release. I just use the new one when I upstream code.
Thanks, Peng.
adam
Suggested-by: Adam Ford aford173@gmail.com Signed-off-by: Fabio Estevam festevam@gmail.com
board/freescale/imx8mq_evk/README | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README index c1d400bcf9..4f671b069c 100644 --- a/board/freescale/imx8mq_evk/README +++ b/board/freescale/imx8mq_evk/README @@ -11,7 +11,7 @@ Get and Build the ARM Trusted firmware ====================================== Note: srctree is U-Boot source directory Get ATF from: https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fsour
ce.codeaurora.org%2Fexternal%2Fimx%2Fimx-atf&data=02%7C01%7Cp eng.f
an%40nxp.com%7C56fbd5d0b17c4949cc1708d77e41f5c5%7C686ea1d3bc2b 4c6fa92c
d99c5c301635%7C0%7C0%7C637116694069333717&sdata=PxZh7ldsxb %2FxZK7c
J5OpJxblskZJkHZHuXvMqGQC5H4%3D&reserved=0 -branch: imx_4.14.62_1.0.0_beta +branch: imx_4.19.35_1.0.0 $ make PLAT=imx8mq bl31 $ cp build/imx8mq/release/bl31.bin $(srctree)
-- 2.17.1