Hi,
This is a follow up from [1] - Without the 32k crystal configuration, wlan does'nt work. Debounce is needed for HDMI hpd gpio interrupt.
At least the 32k configuration has been done for toradex and phytec boards, follow similar model of programming.
This series is based on master commit e8f2404e093d + the findfdt series[2].
Nishanth Menon (4): board: beagle: beagleplay: Enable 32k crystal configs: am62x_beagleplay_r5_defconfig: Enable SPL_BOARD_INIT arm: mach-k3: am62: Add Debounce configuration register definitions board: beagle: beagleplay: Configure debounce registers
arch/arm/mach-k3/include/mach/am62_hardware.h | 3 + board/beagle/beagleplay/beagleplay.c | 61 +++++++++++++++++++ configs/am62x_beagleplay_r5_defconfig | 1 + 3 files changed, 65 insertions(+)
[1] https://lore.kernel.org/u-boot/20230725185253.2123433-4-nm@ti.com/ [2] https://lore.kernel.org/all/20240130130615.670783-1-nm@ti.com/