This converts the following to Kconfig: CONFIG_FSL_IFC
This is done via select statements to match previous logic.
Signed-off-by: Tom Rini trini@konsulko.com --- arch/arm/cpu/armv7/ls102xa/Kconfig | 1 + arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 4 ++++ arch/powerpc/cpu/mpc85xx/Kconfig | 3 --- drivers/misc/Kconfig | 3 +++ drivers/mtd/nand/raw/Kconfig | 1 + include/configs/km/pg-wcom-ls102xa.h | 1 - include/configs/ls1021aqds.h | 1 - include/configs/ls1021atwr.h | 1 - include/configs/ls1043a_common.h | 1 - include/configs/ls1046afrwy.h | 2 -- include/configs/ls1046aqds.h | 1 - include/configs/ls1046ardb.h | 8 -------- include/configs/ls1088a_common.h | 5 ----- include/configs/ls2080a_common.h | 3 --- 14 files changed, 9 insertions(+), 26 deletions(-)
diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index f919d02db428..6a948d7ba7f4 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -1,5 +1,6 @@ config ARCH_LS1021A bool + select FSL_IFC if !QSPI_BOOT && !SD_BOOT_QSPI select SYS_FSL_DDR_BE if SYS_FSL_DDR select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR select SYS_FSL_ERRATUM_A008378 diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index a6ac897ab307..cb968bc5477d 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -59,6 +59,7 @@ config ARCH_LS1043A bool select ARMV8_SET_SMPEN select ARM_ERRATA_855873 if !TFABOOT + select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI) select FSL_LAYERSCAPE select FSL_LSCH2 select GICV2 @@ -94,6 +95,7 @@ config ARCH_LS1043A config ARCH_LS1046A bool select ARMV8_SET_SMPEN + select FSL_IFC if TFABOOT || (!QSPI_BOOT && !SD_BOOT_QSPI) select FSL_LAYERSCAPE select FSL_LSCH2 select GICV2 @@ -134,6 +136,7 @@ config ARCH_LS1088A bool select ARMV8_SET_SMPEN select ARM_ERRATA_855873 if !TFABOOT + select FSL_IFC select FSL_LAYERSCAPE select FSL_LSCH3 select GICV3 @@ -182,6 +185,7 @@ config ARCH_LS2080A select ARM_ERRATA_828024 select ARM_ERRATA_829520 select ARM_ERRATA_833471 + select FSL_IFC select FSL_LAYERSCAPE select FSL_LSCH3 select GICV3 diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 836aeddbe29f..adbbc9e24567 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -1083,9 +1083,6 @@ config SYS_PPC64 config SYS_PPC_E500_USE_DEBUG_TLB bool
-config FSL_IFC - bool - config FSL_ELBC bool
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 33a825925441..a8baaeaf5cfe 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -500,4 +500,7 @@ config ESM_PMIC Support ESM (Error Signal Monitor) on PMIC devices. ESM is used typically to reboot the board in error condition.
+config FSL_IFC + bool + endmenu diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index df9eae1691c4..a4073b9ba413 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -134,6 +134,7 @@ config NAND_FSL_ELBC
config NAND_FSL_IFC bool "Support Freescale Integrated Flash Controller NAND driver" + select FSL_IFC help Enable the Freescale Integrated Flash Controller NAND driver.
diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index 743d09e9c4d9..32659dba1c43 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -40,7 +40,6 @@ * IFC Definitions */ /* NOR Flash Definitions */ -#define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 27b97ffd2fb0..252e32f316cf 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -76,7 +76,6 @@ unsigned long get_board_sys_clk(void); * IFC Definitions */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index b7c2cd7add89..bbfee8400146 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -89,7 +89,6 @@ * IFC Definitions */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index b3f91176d65e..0975c7416e93 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -122,7 +122,6 @@ #ifndef SPL_NO_IFC #if defined(CONFIG_TFABOOT) || \ (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)) -#define CONFIG_FSL_IFC /* * CONFIG_SYS_FLASH_BASE has the final address (core view) * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h index fa37c681aba2..472550311107 100644 --- a/include/configs/ls1046afrwy.h +++ b/include/configs/ls1046afrwy.h @@ -17,8 +17,6 @@
#define CONFIG_SYS_UBOOT_BASE 0x40100000
-/* IFC */ -#define CONFIG_FSL_IFC /* * NAND Flash Definitions */ diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 3a502bc3468c..c032ebe490e1 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -43,7 +43,6 @@ unsigned long get_board_sys_clk(void);
/* IFC */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_FSL_IFC /* * CONFIG_SYS_FLASH_BASE has the final address (core view) * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index c27eb733382f..4fc954c53849 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -27,14 +27,6 @@ #define CONFIG_SYS_SPL_ARGS_ADDR 0x90000000 #endif
-#ifndef SPL_NO_IFC -/* IFC */ -#define CONFIG_FSL_IFC -/* - * NAND Flash Definitions - */ -#endif - #define CONFIG_SYS_NAND_BASE 0x7e800000 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 140362cf4fc3..93edaaa103c0 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -63,11 +63,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
-#if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS) -/* IFC */ -#define CONFIG_FSL_IFC -#endif - /* * During booting, IFC is mapped at the region of 0x30000000. * But this region is limited to 256MB. To accommodate NOR, promjet diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 0ca03e0702c7..cd58ee54e436 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -74,9 +74,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_serial_clock())
-/* IFC */ -#define CONFIG_FSL_IFC - /* * During booting, IFC is mapped at the region of 0x30000000. * But this region is limited to 256MB. To accommodate NOR, promjet