On 20/02/2020 17:36, Nicolas Saenz Julienne wrote:
As per Linux's driver, ID_MODE_DIS is only set when the PHY interface is RGMII. Don't enable it for the rest of setups.
This has been seen to misconfigure RPi4's PHY when booting Linux.
Signed-off-by: Nicolas Saenz Julienne nsaenzjulienne@suse.de
drivers/net/bcmgenet.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/bcmgenet.c b/drivers/net/bcmgenet.c index 8f4848aec6..e971b556ac 100644 --- a/drivers/net/bcmgenet.c +++ b/drivers/net/bcmgenet.c @@ -448,7 +448,10 @@ static int bcmgenet_adjust_link(struct bcmgenet_eth_priv *priv) }
clrsetbits_32(priv->mac_reg + EXT_RGMII_OOB_CTRL, OOB_DISABLE,
RGMII_LINK | RGMII_MODE_EN | ID_MODE_DIS);
RGMII_LINK | RGMII_MODE_EN);- if (phy_dev->interface == PHY_INTERFACE_MODE_RGMII)
setbits_32(priv->mac_reg + EXT_RGMII_OOB_CTRL, ID_MODE_DIS);
Is this given because by different DTS? Shouldn't that be uniform on the RPi4?
BTW Joe, will you take patches for this driver through your branch? For now I delegated it to me, but I'm fine either way.
Regards, Matthias
writel(speed << CMD_SPEED_SHIFT, (priv->mac_reg + UMAC_CMD));